Search results

  1. dcstang67

    Many parts for sale

    Why does everyone keep thinking I have an entire block with the rotating assembly? It clearly says Rotating assembly and nowhere does it say anything about a block. I dont have a block it is only the crank, rods, and pistons. $400 or best offer on the rotating assembly and $100 for the stage 1...
  2. dcstang67

    New 331 is in the car but I have a fan problem.

    I am interested in seeing the progress pictures.
  3. dcstang67

    New 331 is in the car but I have a fan problem.

    When are we going to see some install pics?
  4. dcstang67

    Aluminum radiator advice

    Northern has been providing high quality heating and cooling products for over 40 years. At Northern, quality is our way of life and a commitment made by every employee to provide the best. Our offices, manufacturing facility, and primary distribution facility are located in Willmar...
  5. dcstang67

    Mustang Sagging Driverside Rear

    If your car has ever had bolt on traction bars and they were placed in the wrong spot that will cause the drivers side spring to bend and cause your problem. I put the grab-a-trak 4 1/2 leaf standard springs http://mustangsunlimited.com/itemdy00.asp?T1=LLS5+01 on my car at the same time as...
  6. dcstang67

    New 331 is in the car but I have a fan problem.

    How much did you have to shell out for this setup?
  7. dcstang67

    The First Mustang Project

    What kind of radiator is that? What are the dimensions of it?
  8. dcstang67

    The First Mustang Project

    I just realized you are the guy I emailed about the bumper on craigslist. Show some pics of the bumper.
  9. dcstang67

    67 bumpers. Original Vs Aftermarket

    Somebody has to have an answer to this. Even if your not 100% sure please chime in.
  10. dcstang67

    67 bumpers. Original Vs Aftermarket

    Is there an easy way to tell if a bumper is original or aftermarket? I bought a pair of advertised original bumpers and cant tell if the front is original or not. The rear clearly has the date code above the license plate. I cannot find the date code on the front bumper. The shape and edges of...
  11. dcstang67

    Edelbrock Rpm Intake fit under stock hood?

    Yes it will. Just make sure you buy the right air cleaner with a drop base.
  12. dcstang67

    Clutch Cable

    Here is one for $140 http://mustangsunlimited.com/itemdy00.asp?T1=7519B+01
  13. dcstang67

    Clutch Pedal Vibration?

    You have preloaded the throwout bearing. Back off the adjustment for the cable so you have some freeplay before the thor out bearing touches the clutch.
  14. dcstang67

    Crane's 1968 Mustang Restomod

    If you are going to replace chrome with new aftermarket it is worth it to buy good Scott Drake parts. The other cheaper ons WILL start to pit after one year and you Will be replacing them again. especially the outside door handles. Everything else looks good. Keep up the work and updates.
  15. dcstang67

    '66 - 12v source for EFI conversion ?

    Your best bet is to tap into the wire directly off the back of the ignition switch.
  16. dcstang67

    LastLaff

    You spelled laugh wrong.
  17. dcstang67

    Edelbrock quality?

    Just because the parts are Made in America, doesnt mean that the people making them are.
  18. dcstang67

    Adjustable Proportional Valve Interior Routing

    The lines arent mounted inside the car. When people do this , they just cut the brake line in the tunnel, flare the lines, drill a hole in the tunnel, take the knob off the PV, mount the PV on the lines, poke the knob shaft through the hole amd then reinstall the knob.
  19. dcstang67

    Which distributor for 332 stroker

    MSD #8598 will work. It has a steel gear for roller cams and works with an MSD ignition box. I have one for sale in the classifieds and I am asking $175 or B/O for it. It is like new with only 2000 miles on it. I removed it so I could go with a stock style fuel injection.
  20. dcstang67

    The First Mustang Project

    If you swap to disc in the front you will need to add a booster. I have done this and the pedal will feel the same as the drum brakes until you add a booster.
Top Bottom
Back
Forums
Menu