Search results

  1. M

    New in box CP-Carillo forged Pistons, Manley Springs,) Bullitt Intake setup and more.

    Bump. Updated first post with more information and lowered prices.
  2. M

    New in box CP-Carillo forged Pistons, Manley Springs,) Bullitt Intake setup and more.

    I have several new items for sale that it looks like I will never get to install on the mustang. All items will work with a 96-2004 mustang gt with the 4.6 engine. All items are brand new, never used. If you don't like the price shoot me an offer. Want it all and I will give a discounted price...
  3. M

    Front Bumper Covers

    Plastic bumper covers warp over time from heat & stress, that might be why it isn't perfect anymore. Aren't there some companies that got ahold to the original molds for replicas? If so, that might be a route to look into if you're overly worried about the bumper not completely lining up.
  4. M

    1st time 347 Stroker owner

    For what it's worth, I regularly work on a 347ci engine that made 413whp/419 ft-lbs of torque NA that has Lucas 36lb injectors in it. Fuel pressure is set at 41psi. Even with the 36's in it, there's a LOT of room for growth...
  5. M

    Old Cats = CASH!!

    Besides platinum, cats' contain rhodium and palladium. Rhodium is over $9,000 an ounce. :eek: Palladium is around $500ish an ounce currently.
  6. M

    So why aren't there are CVT trannies for sport/muscle cars?

    CVT's might be installed in higher hp applications in the future. I don't think they can handle very much power currently(or if they can, they're currently too expensive to use). They've been around for a number of years and have just recently been installed behind those 250-260hp(somewhere...
  7. M

    whats the biggest ghetto rigs you've done?

    Yes. It's so damn humid here in north Georgia that you need to have the heat on sometimes to defog the windows. The rare days when it's really cold, the heat is nice(I leave it set on low or otherwise it runs you out of the car). :nice: My car was covered in some thin ice Saturday morning when...
  8. M

    any other high school stang drivers on here? quick question if so?

    We had a standard ol' parking lot back when I was in high school and everyone parked alright. Our parking lot was a lot larger than needed, so my friends and I parked in the front right-hand corner of the lot(I always parked beside people that I knew wouldn't open their doors into mine, etc.)...
  9. M

    Color code for injector size

    Are they factory or aftermarket injectors? Do they have any numbers on the plastic portion of the body like most injectors do? If so, post the numbers/letters here. These are the first injectors that come to mind when I think black w/ blue stripe. http://www.racetronix.com/621020.html
  10. M

    245/45/17's on FMS C Springs?

    You obviously have never dealt with a fox body with completely dead struts before(ie: bottomed out/no charge at all). On the car I mentioned above, there was 1/2'' of space between the tire tread and the fender when the struts were dead. After swapping in some KYB GR-2 struts and letting them...
  11. M

    245/45/17's on FMS C Springs?

    I've only seen one car with a rubbing issue like yours. It had C springs on it and 245/45/17's. The tires were rubbing the inside of the fender on it only after the front struts were completely worn out/dead. The car had basically no front suspension travel and rode like a horse & buggy. :p...
  12. M

    Slow...WTF why

    Those times are fine, you should have listed the density altitude to begin with. The weather is the main thing that's hurting you...wait until fall/winter to run it again and you'll notice a big improvement(if the weather cooperates).
  13. M

    time slips from 1/8th and 1/4

    With 91.83mph trap speeds, you should be seeing 14.6-14.7's as-is.
  14. M

    stroker what's my hp??

    Is this the cam? "Comp Cams Grind Number XE264HR Duration, Advertised In. 264, Ex. 270 Duration @ 50 In. 212 Ex. 218 Valve Lift W/1.6 Rocker In. .512, Ex. .512 Lobe Sep. Angle 114" Err....hit reply too quickly. If that is the cam in it...that's a baby camshaft for a 347ci engine...
  15. M

    What does your cam sound like?

    Wow, that idle really changed up once the rpms stepped back down from you revving it. I've heard some that had a very light cammed sound(cars w/ exhaust setups that were so loud you could hear any little variation in sound), but not one as pronounced sounding as yours.
  16. M

    Weighed my friend's 91 GT today, comparison with other fox bodys I have weighed

    Have any of you ever weighed a full weight 5spd GT w/ ac and power everything?
  17. M

    what does a 26/10.50/15 tire convert to in ghey talk

    26 X 11.50R15 = a 275/50/15 according to MT's website. I don't see what a 26x10.5 is, but I believe that's roughly a 255mm tire(??)
  18. M

    rack and pinion bushing install help!

    1990 Rack bushings should be two-piece(at least the last 1990 I installed a rack in had two piece bushings and everything was supposedly original on it). As for location, refer to this picture(I borrowed it from another website, enlarged it, and added some crude arrows to point out the rack...
  19. M

    4 cyl. springs

    My father's '92 GT has four cylinder springs on it and 245/45/17's. The tires do rub the against the inside of the fender in parking lots sometimes when making a quick turn(the front sway bar is removed so a quick turn in a parking lot = a bit of body roll that leads to the tires lightly kissing...
  20. M

    PCV Setup/Deletion(for those w/ Victor EFI intakes)

    What are you guys with Victor EFI intakes doing for PCV setups? I have a friend with a 347ci engine that has a Victor intake and the car was bought with the following setup already on it: Breather filter on the passenger side valve cover, then it has the PCV valve placed in the driver's side...
Top Bottom
Back
Forums
Menu