Search results

  1. S

    New Project: dumping the go-fast parts - help me build "Project low budget 12s"

    depends on what you want. But yes remove both the sway bars but then the car will only go straight line. Another thing you can do is if you want a more streetable set up is. 50/50 in the rear, 70/30 in the front 4 cyclinder springs and put quick links on the sway bars to remove them at the track.
  2. S

    New Project: dumping the go-fast parts - help me build "Project low budget 12s"

    50/50 lakewoods out back, 90/10s up front, 4cyl springs front and rear, and remove the swaybars
  3. S

    New Set up

    my old combo put down 357rwhp and 361rwtq. That was with 5lbs of boost, a b303 cam, 190lph pump, 24lb injectors and a 73mm mass air. so i hoping to be around 500
  4. S

    Need Help With Reinstall of Intake

    Hey guys just got done doing my motor over but when i put it back together i am missing one line on my gt40 intake. Any one have instructions on how to install.
  5. S

    New Set up

    Hey guys just going to be finishing my motor today. Im looking to be in the 500rwhp area Stock 302 Block(I Know Its A Time Bomb) 3.55 Gears, GT-40 Intake, Edelbrock Performers, 1.6rr's, Wolverine Cam 498/509 lift, 1 5/8Headers, H-Pipe, Mac Dumps, 80mm Mass Air, 42lb Injectors, 255lph Intank...
  6. S

    Wheel Backspacing

    Hey guys looking to buy a set of cobra r's for my stang 1990 lx 5.0. Will 17x9 be to big all the way around with these rim specs? The wheels are 17x9 with a 5.78" backspace(+20mm offset) . The lug pattern is 4x4.25. Will they fit with 245's up front with out rubbing? and what do you think i...
  7. S

    Fuel Filter Hairpin Clips

    if u want to releive the pressure in the fuel lines just pull the fuel pump fuse start the car and let it run out of gas. Do the fuel filter swap then put the fuse back in and start the car.
  8. S

    Any thing i should know before cam Swap?

    Just like the title says anything i should know or look for while doing my cam swap?
  9. S

    M/T ET STREETS PSI?

    Hey guys trying to get my car ready for the upcoming season. First time ever using slicks. Whats a good pressure to run them at? There 26x10.5x15 on ten holes.
  10. S

    S-trim Fuel Pump

    yea but i think the 255 will flow enough fuel with out the trex. i just want some input because if i dont have to install it i dont want to.
  11. S

    S-trim Fuel Pump

    any one else have any input on this?
  12. S

    S-trim Fuel Pump

    Hey guys just ordered my s-trim today should be here next week going to be running around 10-12lbs. Anyways is the t-rex fuel pump manditory if i already have a 255?
  13. S

    Boost Timing Retard

    Hey guys is it neccesary to have the boost timing retard on the car with a supercharger? Do you have to have it?
  14. S

    where did you guys mount your elec. fan switches?

    I use mine as a fan over-ride so it will work off the t-stat or when im at the track i flick the fan over-ride to keep the car cool in the lanes.
  15. S

    Do batteries short out? I think mine just did

    Thats what happened to mine. Wont charge and you can't jump it. Have to give it the ol' roll start to get it running.
  16. S

    Few Questions

    Hey guys with my current set up in my sig would i benefit by going to 1.7rr and getting a set of hardened pushrods?
  17. S

    what size slick?

    How much psi are you running in them?
  18. S

    Altenator Upgrade

    Any one ever use this kit on there car for the upgrade? http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=PA-16196B1%20%20%20%20%201&comp=LRS
  19. S

    Downs Ford Upper Box Intake

    so its worth buying the downs ford upper for the gt40 and port my lower gt40 then correct?
  20. S

    Downs Ford Upper Box Intake

    Hey guys was thinking about putting a downs ford box upper intake on my car will this be to much of an intake for my car. Also i was gonna port the lower intake on my gt40. Will this be to much for my setup?
Top Bottom
Back
Forums
Menu