Search results

  1. Davin

    Is this a bad install or just a cheap clutch?

    should be 50 (and I'm assuming Summit shipped what I ordered)...but if it were off, wouldn't it affect things even lower in the rpm band?
  2. Davin

    Is this a bad install or just a cheap clutch?

    what up Hissin? Anyway, its mostly upper RPM but do think it is a little worse the higher the gear...I'll have to take it out tomorrow after work to be sure..I think its mostly independent of gear... mo..to my knowledge it is impossible to install a flywheel wrong b/c of the bolt...
  3. Davin

    Is this a bad install or just a cheap clutch?

    its a good aftermarked balancer from Steeda, it was fine before the install and I assume its still good, but good thought.
  4. Davin

    Is this a bad install or just a cheap clutch?

    I just had a new clutch installed. My King Cobra was shot. I went with a HD FMS-M-7560-A302N (veleo?) and FMS cast iron flywheel. I got it back after install and it feels nice until I hit about 5000 rpm. Then its not horrible vibration but its definitly a lot more vibration than there was...
  5. Davin

    What TB for my combo?

    Thanks for all the replies fellas, I must admit that I am a bit intimidated with going to 75mm. I remember when I went to 70mm (still 302) many said that this was too big and that there would be better throttle response with a 65mm b/c of higher velocity/better fuel mix. I guess the limiting...
  6. Davin

    What TB for my combo?

    I currently have a 70mm that I was using before the 347 build. Unfortunatly, I had drilled a hole in the TB plate as a "trick" someone suggested for improving idle. I think its causing some problems. Anyway I was thinking of going smaller with the FRPP 65mm but wondered if this was too small...
  7. Davin

    Any1 have pics of 94-98 w/ stock front and saleen skirts?

    I was considering it and wanted to see it first., thanks
  8. Davin

    Anyone ever try fitting 03 Cobra side skirts on a 94-98 SN95?

    C'mon man, you can do better than that...
  9. Davin

    Anyone ever try fitting 03 Cobra side skirts on a 94-98 SN95?

    I don't mind the no-skirts look so much except when you catch it from the side and the pinch welds, cables and exhaust is sticking out from under the car..looks messy. I may end up going with Saleens but not sure how it would look with the stock front end. I like the stock front end with the...
  10. Davin

    Anyone ever try fitting 03 Cobra side skirts on a 94-98 SN95?

    I don't really like the stock skirts, but I don't like much out there either. None at all leaves a little to be desired...
  11. Davin

    MY IDLE IS DRIVING ME F****N CRAZY!!!

    cool, thanks, found it.
  12. Davin

    MY IDLE IS DRIVING ME F****N CRAZY!!!

    Zen Boy, what changes did you make and to what tables? PS I tried to PM you but yer box is full..thanks
  13. Davin

    car runs horrible after h/c/i

    Glad to here it..how's it run? My 2 cents, if you don't have one, take advantage of the fitting on the fuel rail and install a guage, it'll make it a lot more obvious should it happen again (note: Every adjustable FPR I've ever bought (BBK, Aeromotive) had crapped out on me, except the...
  14. Davin

    car runs horrible after h/c/i

    yes, while it is nice to believe that when the balancer says that #1 is at TDC that it is up but checking the piston is the sure fire way when things are going bad and everything "seems okay". pull the #1 spark plug and stick a wooden pencil (eraser side) in there to feel when the piston hits...
  15. Davin

    I once read that one hp was equivalent to about 20 lbs...

    i.e. that on the straight track, removing 100 lbs (other factors aside) was roughly the same as adding 5 hp. Is anyone familiar with this relationship that can confirm or deny???
  16. Davin

    car runs horrible after h/c/i

    chances are you have made a timing error somewhere. The fuel is probably not "dumping" out as much as it's just not burning off. The plugs are probably fould becuase, well..the fuel is not burning off. Did to degree the cam or at least line the dots up correctly. After that your timing could...
  17. Davin

    347 Combo

    NO there is not. It's just b/c when you stroke, there are so many options/issues - oil pans/coolers, radiators, oil pumps, girdles etc. You can do the Hot Rod mega cheap thing, or the high performance built to perform and last thing..so many variables.... Anyway to the original question...
  18. Davin

    I'm in love! (with my car again!)

    In the front I have the 2K Cobra R Kit (4 Piston Brembo's). I started having a problem where I would be on the brake and they just kind of felt like they were slipping (right at that point where your coming off the break at a stop), plus I flet this kind of metalic grind through the pedel...
  19. Davin

    I'm in love! (with my car again!)

    With so many problems on this board, I thought I'd share a good report! Well, installing cobra rear brakes, MC and new pads all around, I'm still having the same brake problem as before :bang: HOWEVER... Lately I've been driving and there has not been a lot of power, like my clutch was...
  20. Davin

    Q's for people runnin 315/35-17 rear tires & 10.5" wheels

    when I replaced my control arms I tossed my quads so I can't help you there. As far as the parking brake cables, etc, I've never had a problem, just bolted the wheels up. Only thing I can think of is that you may have to adjust your tailpipes b/c these rub sometimes if your hangers are worn.
Top Bottom
Back
Forums
Menu