Search results

  1. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    So in regards of purchasing a spacer i still have to get. what would you recommend? I have also deleted the EGR
  2. 2Tone5.0

    Nothing can stop me and my stang!

    around mid september i was pulled over coming off of an off ramp on a 4 lane road. Wasnt sure why yet. Maybe because i was just driving a schweet stang and the cop was just a jealous pig*heh*. So it turns out when i got the off ramp a school bus was pulling up a long the other side and flicked...
  3. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    Alright so the 70mm throttle body i have with a 5mm undersize of the port opening wont matter to much? or make little to no difference?
  4. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    yup i know its a shame. but the heads were smaller and the compression was higher then. I ordered the next size up 185's and i got the cnc ports done to them. (they claim another 30-40hp). The motor was originally around 10.3-1. compression with the larger chamber size heads and the cnc ports it...
  5. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    the invoice isnt too acurate to be honest. this a friend of mines invoice. A lot of things are not correct. That is what he originally bought. He then started to part the motor. The main componets that left were the heads and intake. So for the crank shaft im just going to have to make due.
  6. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    I really based my decesion to go with DSS based on customer reviews. From what ive heard they are reliable and perform well especially for a street/strip application. Believe me if im going to throw around this much money im for sure to do my homework. The people st DSS have been very reliable...
  7. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    Really that low rwhp? My old setup the 306 block had 100k on it and the rebuild parts had about 50k on them. With around 7psi it dyno'd in at 348rwhp. The motor also had bad blowbye in the cyclinders. I was warned about it when it was getting the tune done. I just took apart the motor and the...
  8. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    Taken exactly from the invoice: Ford Racing or Trick Flow roller cam with Ford Racing lifters, Upgrade to premium hyd... Upgrade from reg. hyd roller to premium hyd. roller camshaft listed below 100.00 100.00 35-522-8 XE282HR .565/.574" hydraulic roller cam Heres the rest of the...
  9. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    my friend has a really good 80mm thorttle body. i forget the name/brand but it was close to $300. (ill post what it is down later) If you say the systemax intake is designed for a 75mm intake, is there a way to fit the 80mm with a spacer that could possibly adapt to it (with EGR delete)? If im...
  10. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    i have the pro bullet that is rated 10 "race prep"
  11. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    ahh damnit i have a 70mm bbk. would it still get the job done? My friend has an 80mm to. would that also work? when i was on the phone with the guy from dss i origanlly wanted the 205 heads with the cc ports. they would have lowered the compression by another .1 They were another $150 i...
  12. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    yeh i jus pulled my old 306 ill try to get some before and afters. Does anyone know what size throttlebody to use for the intake?
  13. 2Tone5.0

    Just orderd the rest of the componets for my shortblock

    So heres what i had.... DSS 331 Pro Bullet. Twisted wedge cam, flat top pistons. what i just ordered (besides pushrods, roller rockers, gaskets, etc) TFTW heads cc ported 185, Holly Systemax intake, Im also running a vortech V-1 at 10psi. running around 9.8-1 compression whats your...
  14. 2Tone5.0

    f303 cam

    i had the f303 in a 306 set up, edle heads, cobra intake, kb pistons. The thing was a mean sob. The f303 is a big cam but yes there are better cams out there.
  15. 2Tone5.0

    Refurbishing an old block (is it worth it?)

    I was taking apart my old block because i am putting a new DSS stroker in my fox. after taking off the heads i took a good look and feel of the cyclinder walls and noticed a good amount of rivits (probably explains the blowbye on the blower). I plan on refurbishing it and selling it off to...
  16. 2Tone5.0

    H/C/I ?'S

    if youre running a nos ap. make sure you get forged aluminum pistons over the hypers and id go with a bigger cam to.
  17. 2Tone5.0

    t5 grinding..

    speaking of this what is a good/best rebuild/upgrade kit for a t-5?
  18. 2Tone5.0

    4.10 gears...Any opionions?????

    so whats stock ratio 273 or 308?
  19. 2Tone5.0

    5.0 stock pistons forgeed?????

    what kind of hyper are they? are they the 390alloy thats T6 heat treated?
  20. 2Tone5.0

    4.10 gears...Any opionions?????

    I have 4.10s but with a blower and a dss331. i rather have 3.73's now
Top Bottom
Back
Forums
Menu