Search results

  1. doc stang

    5.0 cobra motor, build for Camaro-Mustang-Challenge

    what to look for would teh entire ECM unit be changed? is there some identifying mark on the ECU/computer? or is it just a chip tune? based on those numbers, for an otherwise untouched 95 cobra motor, would you think it has been upgraded or not?
  2. doc stang

    5.0 cobra motor, build for Camaro-Mustang-Challenge

    help me figure out what to do. i have a 95 mustang gt, with an untouched '95 5.0 cobra motor in it. it is currently putting out 225 rwhp/275 rwtq, currently with an aluminum drive-shaft, H pipe, no cats, stock exhaust manifolds, and AC delete. it is currently legal, though underpowered...
  3. doc stang

    shifter handle opinions

    thx, had an MGM on the silver vert below,, before she passed on will do he same for the 95, and the 08 bullit while i am at it, i think, found a ton of stuff on here, should searched first, thanks, i am good to go. doc
  4. doc stang

    shifter handle opinions

    now that i re-read the o.p. he seems to be just looking for a different stick for his 5.0 shifter. i guess my question is broader: which shifter (5.0, steeda, other?) is best. looking at shortness of throws, and proximity/adjustability to driver. thanks, doc
  5. doc stang

    shifter handle opinions

    anyone got any comparo data between various shifters, i.e. a back issue of magazine x, or y, which may have had a shifter shoot out for these cars, way back when? i have a 95 GT with T5, it is a track car only, the shifter is, and will remain bootless. the current hurst shifter seems a little...
  6. doc stang

    a few v6 basic ?'s

    is the v6 aluminum blocked, like the v8? how high do they rev? what are the stock hp/tq numbers what is the most NATURALLY ASPIRATED power anyone has made with one? what mods? how much lighter is a v6 CAR, than the v8?? or how much lighter is the v6 BLOCK than the v8 what would...
  7. doc stang

    body in white advice

    if one were to build up a body in white for American Iron, (or Camaro-Mustang-Challenge, (if rules loosened)). . . does anyone know of a step-by-step guide as to how, i.e. in which order to do what, while using a wrecked donor for some parts and aftermarket for others. doc
  8. doc stang

    how much off for a salvage title?

    o.k. so after looking at vehix.com, autotrader.com, yahoo.cars.com, etc, it looks like a running, complete, CLEANLY titled '05 gt with a stick can be had for as low as the mid $14's. there are a few i have come across, which are SALVAGE titled, and from the pics, (at least) appear to be...
  9. doc stang

    u

    v6 power threshold for power adders what is generally considered to be the "safe" hp threshold for the 4.0l V6? what is the weak link/ is it the con rods? like in the 4.6?
  10. doc stang

    400 HP AT THE WHEELS ALL MOTOR,"YES"!!

    not that hard, i make 369 at the rear wheels stroked 281 (now 298ci) stage III heads, stage II turbo cams, C.R. is a little LOWER, in readiness for turbos, and the turbo cams cant be helping the naturally aspirated power either. switch my cams to some BBR II's or something more intended for...
  11. doc stang

    STEEDA Alum. driveshaft - anyone?, anyone?

    anyone using STEEDA's Al. Drive shaft? how is it? is it compatible with short throw shifters, and lowered cars? what is the hp rating? thanks, doc
  12. doc stang

    maf sizing in +05's

    anyone know what size the stock MAF on an +05 GT is?, vs what "most" CAI's (JLT,STEEDA, C&L,etc) upgrade it to?? my reason for asking is my 08 bullitt already has a CAI, but the inlet ttube looks closer to a stock GT's, than my previous C&L racer inlet. so I am guessing the MAF is also...
  13. doc stang

    double barrel photoshoot

    thanks, greenville, s.c. those are bradford pears, there ARE some Cherry trees behind those with the white blooms, they will probably be blooming in a week or two, i guess.
  14. doc stang

    double barrel photoshoot

    i nearly froze my fingers off this a.m. washing nemesis, but it was worth it, i think. the green one is my buddy, and co-worker's, kevin, who has not yet joined the forum. enjoy: doc
  15. doc stang

    auto dimming mirror swap

    it's perfect, thanks, doc
  16. doc stang

    auto dimming mirror swap

    if one were to want to move one of teh electrochromographic (autodimming) rearview mirrors, (found in a stang with the comfort group), to a different stang with the manually dimmed mirror . . . any idea how hard this would be? how much wire would need to be taken from the donor? i.e. just...
  17. doc stang

    how TO, (and how NOT to) wash a new black mustang

    any treatises, experiences, product recommendations would be recommended. i was not as particular with my silver gt i desperately want to avoid swirlies. anyone have any experience with this doc
  18. doc stang

    special ordering a shelby . . .

    any idea whether it is too late to place an order through a dealer, for a specific color/option combo? doc
  19. doc stang

    ?? for those with both 05+ Mustang GT's and GT500s

    z-06's??????
  20. doc stang

    ?? for those with both 05+ Mustang GT's and GT500s

    or at least those who have had (more than just a little) experience driving both. how would you characterize the handling between the two? to what degree?, and why? (again, this is comparing ONLY withIN the s-197 platform (05+). if possible, please compare stock suspension vs stock...
Top Bottom
Back
Forums
Menu