Search results

  1. S

    wideband O2 sensor bung install help

    Got some exhaust work done today. Had them weld in a O2 sensor bung for my AEM wideband right after the collector for my LT's. The shop said they would try to weld it as high as they can get it without pulling off the x pipe, and it ended up being about the 3 o'clock position. AEM says to make...
  2. S

    Magna packs with or without cats on X pipe?

    argh, damn internet nazis at work block that link,i'll check it out at home LOL, nice. Yeah, i'm leaning towards keeping the cats, that way im legal and can pass inspection too.
  3. S

    Magna packs with or without cats on X pipe?

    Need your opinion guys. Here's the situation, i got some magnaflow magnapacks for Xmas. I already have Bassani Mid length headers and Bassani O/R X pipe on the car. I wasnt too sure how loud it was going to be so i also got a pair of used Bassani Hi flow bolt on cats from a dude. Now here is my...
  4. S

    Borla Stinger mufflers only?

    Do they sell just the stinger mufflers? Ive got the regular borla catback but it isnt quite the sound i was hoping for. I think the stingers is what i want. I dont want to buy another catback for $600, so i was hoping to have just the mufflers welded into place. gonna check ebay, but does...
  5. S

    Coolant fill procedure

    Cool,thanks guys, thats what i thought.
  6. S

    Coolant fill procedure

    There isnt a special way to fill the coolant on our cars is there? I lost the belt on my car which caused it to overheat and loose a lot of coolant. Ive always just started the engine when its cold and opened the coolant resevoir cap and just poured coolant in until the full line on the...
  7. S

    Anybody have the Stangmods Hid kit w/projector pkg?

    I was checking out stangmods and like the package setup they have for HID with the projector housings. Anybody have the package from them, and if so how is the cut off line for the hids? Any pics of cut off lines? TIA :nice:
  8. S

    2004 Mustang GT - Caster Camber Plates

    did a lot of research last week to see which ones i was gonna get and came accross a bunch of shops and alignment techs that say only maximum motorsports. Supposedly the rest arent anywhere near as good or have near the adjustibility of the MM. Site sponsors sell them and give us a discount too.
  9. S

    MM caster/camber plates

    Went to get an alignment and here were the results: Left front: camber: -0.6 caster: 3.0 toe: 0.12 Right front: camber: -0.9 caster: 4.1 toe: 0.13 cross camber: 0.3 cross caster : -1.1 total toe: 0.25 They told me that the right front caster is out of specs but cant be...
  10. S

    front end alignment/steering wheel alignment

    thanks guys, i just ended up pulling off the steering wheel and re installing it straight. much easier in the end then having an alignment shop trying to screw with it.
  11. S

    front end alignment/steering wheel alignment

    Installed a FR500 steering wheel, the steering wheel would only fit on a certain way because of how the tabs lined up. Well because of that, my steering wheel is now a little crooked and turned to the right when the car tracks straight. My question is that if i get a front end alignment from...
  12. S

    Roush alignment probs/caster non adj???

    went for an alignment today on my 2002 S281. The specs were as follows: Left front: camber: -0.6 caster: 3.0 toe: 0.12 Right front: camber: -0.9 caster: 4.1 toe: 0.13 cross camber: 0.3 cross caster : -1.1 total toe: 0.25 The alignment shop said that the right front caster and...
  13. S

    cruise control cable

    Gotta swap cruise control cable's with my bullitt intake, and i was wondering where and what the cable attaches to once it goes into the fender wall. And how do i get access to unbolt the cable from the fender, is it reachable from the top hole or do i have to get underneath the car? EDIT...
  14. S

    Leaking fluid from driveshaft yoke

    Yeah, the differential hasnt been touched since i had gears installed a few years ago. i think i'll take it to a shop & have it looked at, i dont like messing with the rear diff
  15. S

    Leaking fluid from driveshaft yoke

    yeah, i'll have to get it done asap. Anygood write ups anywhere on how to replace the seal and what parts/tools i will need? I'll need a new crush sleeve and pinion seal for sure. I want to find out any tricks or tips before i tackle this.
  16. S

    Leaking fluid from driveshaft yoke

    Got underneath and took some pics: This is the rear of the driveshaft, you can see the drops of oil on the u joint, so think its the pinion seal?
  17. S

    Leaking fluid from driveshaft yoke

    if it was diff fluid, wouldn it be dark colored? the stuff on the garage floor was clear. i'll have to get underneath and take a close look to see if its anything that stands out as the prob.
  18. S

    Leaking fluid from driveshaft yoke

    I might be off on my terminology. It might not be the yoke. Its the U joint on the rear of the driveshaft that connects to the rear end (pumpkin) . Its a clear fluid too, which is wierd, because isnt rear differential fluid dark? I'll try to take some pics tomorrow.
  19. S

    Leaking fluid from driveshaft yoke

    Kinda confused what could be leaking from the yoke. Car has been sitting for a couple months while i do some mods. Looked underneath today and on the garage floor was a half dollar sized spot under the driveshaft yoke. I touched it and it was an oily but a clear fluid residue. It smelled like...
  20. S

    KB BAP install help (see pics)

    sweet, thanks for the help guys, finally got this mess figured out an wired correct.
Top Bottom
Back
Forums
Menu