Search results

  1. I

    Does my clutch need to be replaced???

    You can get a King cobra with t/o bearing for like $200, I just did my clutch I went with RAM powergrip Hd clutch $360, Ford Racing HD T/o bearing $55, pilot bearing $20, Resurface flywheel $40 so cost me $500 with shipping parts alone. So just depends on what you get.
  2. I

    Help with codes

    So this is a smog pump code yea I dont have a smog pump.
  3. I

    Help with codes

    Alright changed Iac, Tps, and 02's and car is running good now, getting a new code with koer test though, code 311 (Thermactor air system /fault during engine run self test), and code 314 ( Thermactor air system /fault during engine run self test/ left side) whats these codes, also hard for me...
  4. I

    Tuner

    I allready have the eliminator chip with 1 burn so I'll just stick with that it came with the car, I just want something I can play around with and adjust, but I guess I'll leave that up to a good dynotune.
  5. I

    Tuner

    Can you use a Sct handheld tuner on these cars or not I hear yes and no, websites say for 96 and up models. I do have a Sct chip installed, Sct website shows some type of wire I could plug directly into my chip then I think I could use a handheld, or should I just get a dynotune and a new burn...
  6. I

    Cold Air Intake Advice!!!

    Who makes Quarter Horse tuner cant find it.
  7. I

    Ebay Scam?

    I've bought over 70 items through ebay, never a problem.
  8. I

    Cold Air Intake Advice!!!

    You cant use a tuner on a 95 without buying a chip then you can buy a tuner that hooks to the chip but not worth the $700+ dollars.
  9. I

    A/C

    Shoot me an email about price, and maybe some hookup info. [email protected]
  10. I

    A/C

    I want to put the A/c back on my 1994 Gt it was gone when I bought it, I have nothing but the spouts coming out the firewall, I dont even know where the electrical plugs are, I do see the bracket to mount the compressor below my p/s pump on drivers side. What would I need Compressor, condensor...
  11. I

    Help with codes

    I took the whole intake off cleaned throttle body, Iac and intake replaced all hoses, I just got a new Iac today got to put it on, I'm also changing Tps and 02 sensors figure there 15 years old might as well. If this doesnt work I'm gonna get a new dynotune burnt on my chip.
  12. I

    Help with codes

    Ill work on that 02 sensor cars runs great except at idle.
  13. I

    Help with codes

    I do see a black cylinder just hanging there a wire hareness in top and vac lines out bottom one goes somewhere I cant see the other is capped off, If this is the purge sensor would I need to do anything to it. Anything on the code 212, and would the 02 make my car idle bad, thats the only...
  14. I

    Help with codes

    Got my new reader and man was I off on these codes, here are the new codes and can you help me on whats the problem. Again pulling codes due to poor idle car revs up and down, and takes about 15-20 secounds to return to somewhat normal idle after u rev it up. This is KOEO test. code 511...
  15. I

    H pipe or X pipe

    You'll never get a good answer to this, I just cut my x off last week and put an h on, hated the x, had 4 mustangs with h thought I would give the x a try, h back on.
  16. I

    Help with codes

    I ordered a digitial read out one that should be easier to read.
  17. I

    Help with codes

    So I would get a Obd1 reader and it would just plug in where I did the paper clip test, passenger side behind shock tower.
  18. I

    Help with codes

    I am having a problem with my idle dropping takes about 15 secounds to return to normal, also idles up and down and runs rich. so I pulled the codes advance auto couldnt do it got error, so I got them with check engine light,and got a bunch dont understand them much, I have a e303 cam...
  19. I

    First post

    Thanks everyone, I'll get some pics. soon still got to get a custom two tone paint job trying to get all the bugs worked out first,with engine and suspension. I was over at modded mustang and I cant get any answers to my questions from those 94-95 guys.
  20. I

    First post

    Hello to all this is my first post and wanted to let yall know a little bout my car. 1994 Mustang Gt Cobra R rims Double cowl hood Msd ignition Msd coil e303 cam Gt40 turbo swirl heads Cobra Full intake polished Bbk LT Headers Mac Hpipe Super 44 flows 373 gears Ram powergripp Hd...
View older results
Top Bottom
Back
Forums
Menu