Search results

  1. 97gtconv.

    code help

    bump
  2. 97gtconv.

    code help

    well this is the story. i swapped out my stock plennum and put a granatelli on. i couldn't get the tps sensor off of the throttle body so i bought a new one to go on my bbk 75mm throttle body. the car runs good but my check engine light came on with the following code 02-P0301 can someone...
  3. 97gtconv.

    steeda underdrive pulleys size belt?

    they stock one works just fine.
  4. 97gtconv.

    TPS Sensor can't be removed!!!

    thanks for the replies everyone
  5. 97gtconv.

    TPS Sensor can't be removed!!!

    i taped up the connection port and sprayed it with wd40. didn't work
  6. 97gtconv.

    TPS Sensor can't be removed!!!

    what a pain in the a$$. why the hell did they put locktide on it??
  7. 97gtconv.

    TPS Sensor can't be removed!!!

    Alright, I bought a Granatelli plenum and a BBK 75mm throttle body to put on my stang. I however cannot get one of the screws out for the TPS sensor. I had to use a pair of vise grips just get the one out and that doesn't even work on the other one. It just keeps tearing it up more. Any...
  8. 97gtconv.

    70 or 75mm TB??

    75!!!
  9. 97gtconv.

    Convertible Top Replacement

    i bought my top off of ebay. both parts for i think 380 which came with the heated glass window. it cost me like about 400 to have it installed. i've had it on for 3 months and no probs.
  10. 97gtconv.

    I'm a idiot...need help

    i bought a 5/8" tube that fits nicely over the metal pcv tube on the plennum. now i i have to find a way to attach them because it looks like the 5/8" is to large of a diameter to fit snuggely in. maybe some clamps will hold them together without clogging the tubing up.
  11. 97gtconv.

    I'm a idiot...need help

    ok thanks for the idea's. my buddy says they make different size inside diameter hoses. one end both ends of the tube are different sizes. that might be able to do this job. i'll be checking out the parts stores and will give a update on how it goes.
  12. 97gtconv.

    I'm a idiot...need help

    I went to the Fast Ford weekend in Baytown, TX this weekend and I picked up a Granatelli plenum. I was asked what car I had and I told them i had a 97 but it's going on a 03 intake manifold. He wasn't sure what the difference was and neither was I. Well it turns out that the only noticeable...
  13. 97gtconv.

    How hard do you drive your GT?

    i think i did two 10 second burnouts so far and my tires are about 3 months new. i do use the gas pedal alot. probably why i'm going on my second motor. my first had almost 105,000. i really didn't buy my car to sit in the garage and collect value i bought it to run it, it's not fast nor the...
  14. 97gtconv.

    engine cleaner

    i have my engine in shortblock form and i want to get all the carbon and gunk off. what's a good cleaner thats won't mess up my engine? where can i get it? thanks
  15. 97gtconv.

    Ok if you guys were in my spot, what would you do?

    well i was gonna say u probably could get a nice decent 96-98 cobra. u can get a pretty well done up 99-04 2 valve that u can put a down payment on or u can buy straight up. u might be able to find a 99-01 cobra cheap but your most likely going to to spend about 13k for a 99-01 cobra. depends...
  16. 97gtconv.

    timing chain q

    well i have some problems with my timing chain and what not. i'm starting to get some awful clunking and rattleing noises from underneathe the timing cover. how much does a timing chain, cam gears, and whatever else cost brand new? i'm droping another motor in like a week or two. the motor is a...
  17. 97gtconv.

    cam gear question

    i'm doing the pi swap and the 2002 pi heads that i'm getting don't come with the cam gears. do i use the 2002 pi cam gears or do i use my stock 98 non pi cam gears? thanks
  18. 97gtconv.

    What to do?

    I'm hung up. I bought a 98 short block 45,000ish with stock complete npi heads, head gaskets, exhaust gaskets, plennum gasket, stock plennum w/ throttle body, npi intake, pi cams and also new factory head bolts. i bought all this cause my current 97 motor is junk and this 98 motor is cherry...
  19. 97gtconv.

    converting 1/8 to 1/4

    i'm putting a 98 gt motor in with the pi swap. i'm also eventually putting 4.10 in the rear with a rear end rebuild kit and timing adjuster. i already have longtubes, catted h and catback. i also have underdrive pulleys, cold air intake and superchips 1725 programmer.
  20. 97gtconv.

    converting 1/8 to 1/4

    i went to the track in dallas called yellow belly. it was a crappy track. worse yet i messed up my stang. i'm in the process of fixing it. hopefully i'll get back out....with a better time.
Top Bottom
Back
Forums
Menu