Search results

  1. blueovalguy

    Ford Racing Cat-Back Question

    That's the same answer I got from Arvin Industries (they make them for Ford). I paired mine up with an MRT catted H-pipe, and it is a real nice set-up.
  2. blueovalguy

    3rd Annual Sept 11th Ride for Pride Cruise

    Bump TTT!
  3. blueovalguy

    My cat is rattling - Question for catted MRT H-pipe owners

    I was one of the first to get the MRT catted H, and have had no problems with mine. It's been on there over a year and 10,000 miles.
  4. blueovalguy

    Car cover recommendations

    Go here, and get the Noah! http://www.autoanything.com/shopping_guides/car_cover/shopping_guide.aspx?se=car_covers_covercraft
  5. blueovalguy

    C/C plates, bump steer choices

    When you install the lowering springs, it changes the steering mechanism angles. The Steeda ball joints bring things back to the right angle, so there is no binding. My car drives much better since I installed the bumpsteer kit and ball joints. Just my $.02 worth.
  6. blueovalguy

    C/C plates, bump steer choices

    Go with the Pro3i C/C plates, Steeda bumpsteer kit and Steeda Balljoints - you won't be sorry! You can get them all here on partshopper and help the site out too.
  7. blueovalguy

    Any Alexanderia or D.C guys here???

    Springfield Motorsports is about 2 miles from Ft. Belvoir!
  8. blueovalguy

    test

    .
  9. blueovalguy

    test

    cid:[email protected]
  10. blueovalguy

    Bellhousing bolts

    Thanks, I just need to buy a set to bolt my engine up to the stand.
  11. blueovalguy

    Bellhousing bolts

    Does anybody know what size the bellhousing bolts are on a 351W?
  12. blueovalguy

    351W head ?s

    Now I'm really going to sound stupid, but what do you mean by positive stop studs? The guy who assembled the motor did everything, and I bought what he suggested!
  13. blueovalguy

    351W head ?s

    I'm running the Edelbrock Performer RPM cam, crane springs/wcomp cams roller rockers. I already have the hardened seats, exhaust bumps are ground off, and valve job done. The guy who did the motor for me said I wouldn't need the screw ins, but since then, everyone I talk to says I need them.
  14. blueovalguy

    351W head ?s

    I've got a 351W, bored .30 over, Edelbrock Performer RPM cam, intake and carb, Accudrive gear drive, Crane springs, Comp Cams roller rockers + a bunch of other ****. At what point do you need to change from press-in studs to screw-in studs on the heads? Also, what does it cost to have them...
  15. blueovalguy

    Cobra Bumper Inserts - Have bumper letters changed over the years?

    Goi to www.bobwhitedecals.com Best ones on the market!
  16. blueovalguy

    which tires

    I had the Kumhos on mine, but just changed them for Pirelli P Zero Neros. Much better tire than the Kumhos. My Kumhos got very choppy feeling(like they were out of balance, but they weren't) and they sucked in the rain too!
  17. blueovalguy

    New BFG's: worth it.

    I just got the P zero neros for the back of mine (285/40X18) and they stick like glue. 10 times better than the stockers, and much better than the Kumhos I had before!
  18. blueovalguy

    Teh "What kind of cat-back/muffler does your stang currently has?" Poll

    I like it, but a lot of guys don't think it is loud enough! There are sound clips of my set-up on mustangexhaust.com. It is more suited to us "old men".
  19. blueovalguy

    Help me choose a midpipe for MagnaPacks

    I have to vote for the MRT. It is more expensive, but your getting a quality piece and it is stainless too!
  20. blueovalguy

    Quick Cobra Wheel Question...

    www.wheelreplicas.com carries them too!
Top Bottom
Back
Forums
Menu