Search results

  1. S

    No more leaks!!!

    Thanks for the responses I received. I got my new rms teflon unit in and a new oil pan gasket, I took some extra steps and got her sealed up. Tranny is in. Now all I have to do is cut off my old cat back(Some ass who owned the car before me had a crappy ass cat back welded on with some cherry...
  2. S

    Brand new 347 has rear main leak!!

    Thanks for that info.
  3. S

    Brand new 347 has rear main leak!!

    That really sucks it is leaking there. Brand new gasket, brand new block, and a brand new pan as well. I tried backing off the oil pan bolts and resetting the gasket and tightning them back up, I cleaned the area came back to it a half hour later and it is still building up at the edges and...
  4. S

    Brand new 347 has rear main leak!!

    Yeah, I had the tool and I used a thick plastic cup that i had that just happen to fit perfectly around the seal. I used some royal purple i had lying around.
  5. S

    Brand new 347 has rear main leak!!

    No the rms was clearly leaking and bent. I clean the area went in the house for a while and came back to it. I Then replace the rms, clean the area went in the house and came back ready to put everything back together and I noticed the pan gasket leaking as well.
  6. S

    Brand new 347 has rear main leak!!

    soit looks like my oil pan gasket is leaking as well. From the corners where it goes around the rear cap to block. i bought the 30 dollar one piece gasket. Should I have used sealer on the corners anyways?
  7. S

    Brand new 347 has rear main leak!!

    So I just got down to the rear main seal. It doesn't look very straight at all. So the machining guys are dumbasses. You know I checked everything inside the short block before I put the rest of it together,but I never checked the rms. Well they are paying me 500 for the labor, and refunded the...
  8. S

    Questions about Trick Flow top end kit?

    I have almost the same kit but I have a 347 so I called in my order and they hooked me up with a couple different things for my valvetrain. I really need a tune. I am running 30 pound injectors and a bigger maf. But I knew that I would need a tune. I live in the middle of the moutains in durango...
  9. S

    BBk x pipe wont bolt up to bbk headers

    I got it. My Friend and I just played tug a war with it and now it fits fine. I guess the the build was a little off. I hope it doesn't leak anywhere or I am calling bbk.
  10. S

    BBk x pipe wont bolt up to bbk headers

    So I started to pull my tranny to replace my rms and i pulled of my old beaten bbk h pipe, I have a new cat back and x pipe that is going back on the car when my rms is replaced. I pulled the new x pipe out of the box to compare to the old h pipe. Almost the same but a little different. i go to...
  11. S

    Brand new 347 has rear main leak!!

    I checked the intake manifold and every single thing that it could be hoping i didnt have to pull the tranny out of my car. This is my 8th fox body. I made sure that spots like the corners of the intake were sealed good. And I used thread sealer on my flywheels bolts just like I do with the head...
  12. S

    Brand new 347 has rear main leak!!

    I am running a brand new pcv valve along with breathers on both valve covers. what I have seen on some of my other mustangs is that positive crank pressure like that would also push my dipstick tube out. i am looking at a new bbk x pipe to mate with my long tubes and a new flowmaster cat back...
  13. S

    Brand new 347 has rear main leak!!

    I dont think I am going to have the motor pulled for a rear main seal leak. i just dont understand why it is leaking. I havent really gotten on the car yet. I havent even brought her up to 100 plus on the high way.
  14. S

    Brand new 347 has rear main leak!!

    I got the short block from a company called Bullet racing engines from the trough the shop i used to work at. I have installed a couple of 383 strokers and a big block ford stroker as well from this company and not had any problems. The motor has a year warranty but it would really suck to pull...
  15. S

    Brand new 347 has rear main leak!!

    What the hell, The car has 2800 miles on it since I put it all together, New engine,tranny rear end exhaust. you name it and it is brand new. I spent 5 months putting this car together and now this. i have check all upper seals in the back of the motor, clean and dry, checked pcv and the same...
  16. S

    3g set up starting to have problems

    I have an underdrive pulley set. This set did work for about a month. I just started having problems with it.
  17. S

    3g set up starting to have problems

    So I have had my 3g install for a month now. The car had great charging untill the other day. the needle used to read about have during idle. now it only reads 12.7-12.8 at idle and when I give it some gas then it goes up into the charging are. This is the problem I had with the stock alt. I...
  18. S

    Fuel gauge not working

    Pulled the battery cables for 10 minutes. Same thing. It worked untill the sender was pulled out. I have triple checked its install over and over.
  19. S

    Fuel gauge not working

    Ok So i just finished building my car. It Runs ****ing Awesome!! My friend helped me do a couple of mods after the car was finished,like a better fuel pump. While I was readjusting my roller rockers he was going to swap out my pump for me. He pulled the sender by accident. I put ot back Amnd...
  20. S

    Head bolts leaking coolant!!!!

    Ok so I am going to my work to grab some sealer for my head bolts. Ill tell you how it comes out.
Top Bottom
Back
Forums
Menu