Search results

  1. SamMan

    install these or wait fora V2 SQ

    I would skip the small stuff and save for the blower. As already mentioned the HP/$ ratio is best with power adders.
  2. SamMan

    Nitrous Question

    :rolleyes: :lol: Whatever hoss. For a wet kit at 100 hp or less you most likely will not need any major supporting mods.You will need one-step colder plugs at the very least. If yours is a standard I would highly suggest a window switch. This will shut off the spray at a high rpm in case...
  3. SamMan

    Loose Rubbers

    The title of this thread is kinda funny. :D Anyways yeah I would say thats a little extreme on getting sideways with a stock vert. However you never know. It could have been the road surface. Does this always happen? Mine can get a little sideways N/A from time to time but I have maxed...
  4. SamMan

    what next...school me please..

    If you get a KB later then those 4.10s are going to be WAY too much gear. Plenum and TB will be useless with a KB as well. I would go with 3.73s and a SCT or Predator. You can max out your timing which will give you a little extra plus you wont need a speedcal with the tuner.
  5. SamMan

    How many of you purchased an extended warranty/road hazard protection for your tires?

    I ran over a nail on one of my nitto's on the front and had it replaced. Then I hit a curb and blew out both right side tires and had both of them replaced. Ive had it pay for three tires in as many years. I think its worth it. :shrug:
  6. SamMan

    Hello traction!

    Enjoy them ...... while they last. :D
  7. SamMan

    Brakes creaking...

    Did you ever figure out what this was? Mine is doing it too. Its the pedal and not the breaks and yeah it creaks when I press it in even when standing still. Its driving me crazy! Someone please help. :notnice:
  8. SamMan

    Fox Body Stang "DONK" LOL!!!Pics

    "Ooooooh dats a purdy wheel" :rlaugh:
  9. SamMan

    They've hit stangnet

    Nigerian check scam.
  10. SamMan

    Blown engine...Suggestions?

    75hp is maximum for a dry shot without fuel system upgrades irregardless of manufacturer claims. When you stated 125hp yesterday I was shocked because I have only heard of very few motors letting go on a 125 wet shot. Ive heard about and seen vids of quite a few popped intakes but not a blown...
  11. SamMan

    So I've heard 4.10's with an automatic, 3.73 with manual but why?

    I have 3.73's in my auto car. However I did this because I knew I was getting spray. If you are not going to get a power adder of any kind I would go with 4.10's or at the very least 3.90's. The reason is because it gives you advantage when racing standard cars. Unless you have a tuner its...
  12. SamMan

    851 RWHP TT 2004 Cobra

    Why are yall hatin'? I think its a slick car. I wish I had it. :shrug:
  13. SamMan

    BFG KDWS tires any good?

    I recently switched from Nitto555 DR's to KDW2's. I couldnt be happier with the switch. Beleive it or not the KDW2's are only ever so slightly less grippy than the Nitto DR's. What you give up in dry traction though you certainly gain back in wet weather and treadlife. KDW2's FTW! :nice:
  14. SamMan

    Nitrous Setup for 01 Bullitt

    I think the WOT (Wide Open Throttle) switch should come with the base kit. You may want to double check that but I am fairly certain. This is the same as the TPS switch. If you are in an auto I dont think the window switch is necessary. In a 5 speed it is because it will save you in the event...
  15. SamMan

    wash off spray paint?

    I think I saw that on Cannonball run. :rolleyes:
  16. SamMan

    stock motor nos setup?

    1. You will need one step colder plugs with the correct gap. Ive forgotten exactly what that is but you can find out with a search. 2. Always run 93 octane. 3. Dont go over 125 at the wheels. Some people get away with higher but thats around the area where puddling becomes an issue. 4...
  17. SamMan

    pro kit installed....not much drop

    Ive got the same springs. They will settle after a couple weeks just give it a little time.
  18. SamMan

    Just another girl and her 2 valve

    Cute hair? What did I miss. :shrug:
  19. SamMan

    Nitrous Parts Compatability question

    This is what my bottle looks like. So would an NX opener work or do I need to go with the NOS brand. I kind of like the other ones better. From what I can tell they open the bottle at the bottles valve verses the bottles valve being open all the time and the opener being an inline valve. Hope...
  20. SamMan

    How do I NOT become this guy...

    Thats what I was thinking. At first I was like "600 blew a Terminator!". Then I heard 99 cobra and I was thinking. "What an idiot."