Search results

  1. H

    what mods to get before a supercharger?

    Bigger, better brakes.
  2. H

    Is this a good price for Dynamat?

    Link to Graham's solution for exhaust drone on the Corral This is probably the best solution for you if you want to eliminate exhaust drone. All other solutions seek to reduce transmission of the noise by "deadening" the metal of the car (turning sound energy into heat energy). This...
  3. H

    2V Question: Kenne Bell 2.2L versus Saleen Series V (2.3L)

    I wouldn't believe those numbers unless I personally saw the car on the dyno. I'm very aware of what the limitation of the manifold is, and to say that it's simply an intercooler gap issue is not correct. The statement that you just use some "sealant" for the gaps would suggest that...
  4. H

    are autorotor and kenne bell the same?

    Say you get the compressor directly from Sweden......... Where are you going to get the rest of the kit from? Edit: K-B won't part items out from a kit
  5. H

    Saleen Center Exhaust

    Get it from Chicane......that's where those other places get them from. Chicane Sport Tuning Hop .
  6. H

    2V Question: Kenne Bell 2.2L versus Saleen Series V (2.3L)

    The 2v E car only makes around 400-425, pushing more air and at a higher boost pressure level, but is saddled with the same manifold.......and the motor had head work too in addition to porting the manifold to help get the extra horsepower out of it. If your main goal is to live in the 400 +...
  7. H

    Hood Problems

    Didja' try adjusting the hood stops? One may have been high from the get go?????
  8. H

    Is this a good price for Dynamat?

    I covered my car with a layer of Brown Bread followed by a layer of Lcomp that I got from B-Quiet . You can see pictures of the install on my CarDomain site through the link in my signature. Most stereo shops that I checked with wanted $1000-$1200 range to do the install as I wasn't...
  9. H

    Will I pass Cally emissions with low-compression crank/rods/pistons?

    I highly recommend Chicane for the install. They did all of the mechanical work on my car. We are pulling the Saleen S-IV off and putting a K-B on in about 10-days. One of the main reasons I continue to go to Chicane is the amount of effort they put into the even the smallest...
  10. H

    Tell me your experience with any of those tires

    20,000 + miles on Bridgestone Potenza SO-3's. These worked very well for me, wearing great and not getting loud, and still feel pretty good handling wise. Would buy again in a heartbeat!!!!
  11. H

    Replacing front bumper

    Others have just forced-fit the connectors, but there is a complete wiring kit that will let you splice into the system. Just cut the old connectors off, splice in the new connect (even has heat shrink cover for the splice). That is what I used. PN# = 1U2Z14S411BCA You'll need two, and...
  12. H

    How to remove the rear seats

    There is a release tab mechanism that needs to be depressed to release the seats. Carefully use a small flathead screw driver as the pic illustrates. There are two tabs located approximately in the center of each seating area, just above the heel kick panel. Hop
  13. H

    03/4 Cobra Inlet Air temps

    Thanks for the info 04_Snake. It aint much.....but here is a tip for ya' To make the degree sign press Alt + 0176 (on the key pad) and you'll get the ° sign!!!!!!
  14. H

    03/4 Cobra Inlet Air temps

    Meat, Thanks for the link!!!!!!! 04 Snake, Now that's what I'm talkin' 'bout!!!!!!!!!! Thanks for the pic. What's a Raptor set a fella' back these days? Is that logger better than an XCal? Thanks, Hop
  15. H

    03/4 Cobra Inlet Air temps

    Does the computer read each value separately? If so, even better as the ambient temperature doesn't matter as it is the delta-T that I'm really interested in. Do you know of anyone that has datalog such information? Thanks again, Hop
  16. H

    03/4 Cobra Inlet Air temps

    Does anyone one know what the actual inlet air temperature (after the cooler) range runs through A WOT pass or a dyno run for an 03/4 Cobra ???? Thanks, Hop
  17. H

    MM Sport Box Vs there full coilover setup

    Coilovers are the way to go from a performance standpoint. For starters, due to the nature of the design (position or location of the spring) you can use a lower spring rate and acheive higher levels of performance than would be possible with a standard setup. For example, I have 350-lb...
  18. H

    series V blower......

    You're still going to be stuck with that crappazz Saleen mainfold that doesn't flow. Save your money for lap dances, you'll get more out of it.
  19. H

    Cobra body kit help..

    Get the rear bumper and fill it!!! Hop .
  20. H

    saleen blower/oil changes

    Thank you!!!!!! Not sure what Saleen recommends on that though I did find this info from the SC T-bird forum and something from the Eaton website (nothing that specifically says change the fluid at XXXX miles). Fluid is typically distrbuted by Nye who packages many different fluids for use...
Top Bottom
Back
Forums
Menu