Search results

  1. VG30DE

    What is the best alt?

    I just bought one for a 99 V6 mustang, $130 at C.A.P. lifetime warranty and puts out 155 amps. Harness plugged right in, and only had to cut the bracket a little but to make it sit flush. Pulley is fine works great.
  2. VG30DE

    Idle Vacuum with your cam.

    I have a come XE276HR cam... around the same idle speed and vac as you
  3. VG30DE

    BAD misfire problem, cant figure it out...

    Both my notch and my buddys 97 ranger (95 cobra motor A9L T5 swap) are doing the same crap. Both started doing it last week. Idle- fine, no surge, no stall, no misfire. Rev it up.... insane amounts of popping, smoking (way too rich), gets worse as you get higher in rpm's and worse more if...
  4. VG30DE

    Gt-40/Explorer HP Question

    Explorer valve springs get real mad at the E cam. And I hope you dont have 1.72's or the pistons get real mad at the valves.
  5. VG30DE

    Heater Core bypass

    False... take the smaller hose and force it on. It fits. I promise. Did it on the side of the road with a pair of pliers and nothing else. Been like that for a year and a half and 3 motors later... Yes, an adapter is better, but can be done without it.
  6. VG30DE

    Eibach Drag springs ?

    I run high 11's on regular street tires(245/45 federal 595's) on ponys. I'm using stock struts, stock shocks, quads still there, steeda rear sway bar and control arms and the good 'ol Eibach drag launch springs with 11 psi in the bag. They work pretty great if you ask me. Almost a 1.8 60' on...
  7. VG30DE

    what will this bad boy do?

    Correct, thats what it could do. I guess I was going for what it most likely will do. He did say just BFG drag radials, not ET streets or anything. Times can vary very greatly based on the driver's launching technique, shifting RPM and quickness, and the strong powerband of the engine and...
  8. VG30DE

    horrible ticking sound?

    I've seen if you dont have the pushrod correctly in the lifter or rocker pocket that its supposed to sit in and tighten the rocker arm down, it bends the crap outta the pushrod and makes a horrible ticking sound. Good thing I had some extra pushrods lol
  9. VG30DE

    Show us your "RED" Fox Mustangs!

    Thats the Vecco front mount intercooler only. I wanted it to get maximum airflow and sit right behind the stock LX bumper but still not be visible unless you know its there, so I removed the bumper support and used a forward rake to allow it to have the entire core right in the opening of the...
  10. VG30DE

    what will this bad boy do?

    low 13's then high 11's...... if it hooks and it really has those #'s at the wheels
  11. VG30DE

    Is this 5 lug conversion kit good?

    I bought everything from mustangs unlimited. Ford Racing rear axles and drums that fit stock everything for around $200
  12. VG30DE

    H.E.G.O sensors?

    Those are the oxy sensors, and thats a common missing piece when you get a used wire harness. And yes. You definately need em....
  13. VG30DE

    Show us your "RED" Fox Mustangs!

    Hey its not mine allright! I made an attempt to make it go away but I was using paint lol
  14. VG30DE

    Oil Level

    Crap. Double post.
  15. VG30DE

    Oil Level

    Thats normal. Because your car holds 4.5 quarts.
  16. VG30DE

    Quad Shocks...need 'em?

    I use a bottle jack between the trunk and the axle tubes to wiggle the control arms and springs in there. It really works well. And the best answer about quad shocks is MAYBE. Some cars need em, others dont. The thing you need to find out is.... after you take em out...when you burn out, do...
  17. VG30DE

    Need clutch! What to buy?

    I ran a CF dual friction, melted it, went to the spec and its unbelievable but its real harsh, now I'm back with the centerforce. I only get about a season out of the centerforce but it holds and grabs perfect right until it dies. I ran 11's on ponys and stock tires with my T5 and centerforce...
  18. VG30DE

    Need clutch! What to buy?

    Spec stage 2 or centerforce dual friction. Centerforce wears out a little quicker than the spec, but its nicer on the drivetrain. Spec 2 is nasty. Ive had both. This is my 2nd centerforce in the car now. I change em once a year lol.
  19. VG30DE

    Show us your "RED" Fox Mustangs!

    Some of mine And this makes the red ones look real good :-P
  20. VG30DE

    Dyno Results - Have Questions

    Wow, at 10 degrees you should be making tons of power with boost. Yes, with 42's and a big MAF that works right, you can definately make 420 at the wheels with your combo. And why the crap are you stopping at 5500 RPM.... rev the thing up!!
Top Bottom
Back
Forums
Menu