Search results

  1. S

    Please Help! Aftermarket fuel rails leaking...

    I recently bought a set of fuel rails and lines off Stangnet, after piecing them together and getting them on my car, the injectors will not seal and when i turn the key all the gas just leaks out onto the intake. WTF? This has turned into such a headache, hopefully someone can help thanks
  2. S

    The thread of the nicest FOXES!

    Freshly painted:
  3. S

    The thread of the nicest FOXES!

    My Car:
  4. S

    please help with messed up idle!!!

    My friends 91 GT is having a few issues, that I am trying to fix but cant quite. It will idle fine most the time, except right after I start, you have to play wtih the gas pedal to get it to idle...then it will idle for a couple minutes, and die. I relearned the idle, set the TPS to .95...
  5. S

    bypassing stock amp?

    I unplugged the amp and hard wired the factory wires to the CD player, testing each before i hooked it up to make sure my balance/fade would go to the right speaker...takes more time than running new wire, but a better idea I think.
  6. S

    headers for 5 speed conversion 68 stang

    i have a 68 mustang im trying to get some new headers they need to clear the clutch cable if you know of any please reply with the brand and part # thanks brandon
  7. S

    Got the 351 in my 67!! pictures...

    thanks for the comments, I will work on it when I can, and keep the pics updated.
  8. S

    Got the 351 in my 67!! pictures...

    Well i got the 4 coats of paint down to bare metal and painted the engine compartment semi gloss black. I dropped in the 351 which is .030 over, has World Roush 200 heads, Custom ground Comp cam, 9:1 compression, Victor Jr, Demon carb...I want to put a blower on it eventually, that why its 9:1...
  9. S

    351w and Tremec 3550 into my 67

    I will probably just get some 351w swap headers, they are about $175 in a couple different catalogs, then I know it will work. thanks for all the replys!
  10. S

    351w and Tremec 3550 into my 67

    so replace the tie rod ends, bushings, ball joints etc? The Headman headers for 302 work? are they long tube or shorty? I want long tubes. Thanks for the reply
  11. S

    351w and Tremec 3550 into my 67

    I want to put my 351w and tremec into my 67, I know I need the headers. The motor is fresh, 9.1 compression, and has a supercharger cam (.556/.571 lift, 224/236 @.050 duration and a 113 lobe seperation. I would run a victor jr intake and a 750 carb. The ehads are world roush 200 heads(like the...
  12. S

    Just bought a 67 Mustang

    no bidding, I bought it off vintagemustang.com. Is it the same car, was it on ebay?
  13. S

    Just bought a 67 Mustang

    i will take a couple pictures of the head with the valve cover off and post them, also i will write down any numbers in there. The dipstick is in the timing chain cover, and the water pump is the old style, so it is definately not a 5.0 motor. thanks for the replys!
  14. S

    Just bought a 67 Mustang

    Edbert: that cluster looks so awesome, way better than JME's in my opinion...nice work!!!
  15. S

    Just bought a 67 Mustang

    It does have late model 5.0 valve covers on it, I pulled the valve covers off and the arent the bolt down style rockers like 5.0's, they are factory stud mount ones. It doesnt have AC so I will try the heater core sometime soon! thanks
  16. S

    Just bought a 67 Mustang

    That is a lot of money, I think I could make it look that good on my own. Thanks for the link though.
  17. S

    Just bought a 67 Mustang

    I dont have much planned for the body, except to fix the rust, then paint it. It has a fiberglass hood with a scoop, its pretty cool. I like the 68 1/4 panels better, I dont like the little grills but I dont want people to think its a 68 so I dont know there. I plan on leaving off the emblems...
  18. S

    Just bought a 67 Mustang

    Thanks for the reply, 2.79 sounds about right on the rear end...very long gears. Would you suggest switching the heads? I plan to keep the edelbrock performer intake, stock 289 or 5.0 heads, and put in a cam. thanks!
  19. S

    Just bought a 67 Mustang

    I just bought a 67 mustang, It has a rebuilt 289 with edelbrock intake, holley carb, and tri-y headers. the tranny I think is a C4 and feels like it has a shift kit. It has some rust, the driver side floor, the bottom of the 1/4's, and one spot under the back window. I paid $1150 for it...
View older results
Top Bottom
Back
Forums
Menu