Search results

  1. onebad7up

    Anyone ever greased their convertible joints?

    My car is getting extremely loud. The joints squeak like crazy when I drive. I installed subframe connectors but there is still noise in the interior of the car. I looked at it today but I do not know what would be the best way of doing it. I was thinking about oiling the joints instead of...
  2. onebad7up

    What is the point???

    Why are so many people against the 25th? It is still a fox body, and a clean looking fox body at that. Everytime I take it out after I wash it I get compliments. Emerald green looks good with the white. It may not be the rarest car on earth but it is special. This forum has its good points...
  3. onebad7up

    Heads from a 85 351w on my 302

    The guy with the 69 heads wants 350, but he said they need to be checked because the valves touched the cylinders. I dont think I am going to bother. That could have damaged everything.
  4. onebad7up

    Heads from a 85 351w on my 302

    So I guess I shouldnt bother since 302 and 351 heads are the same. Right?
  5. onebad7up

    Heads from a 85 351w on my 302

    So those 351w heads are e7's? I do not need to go through the trouble of putting them on then because my e7's are still good. Do they flow better? I do have to pass emissions but they do not check in my engine compartment.
  6. onebad7up

    Heads from a 85 351w on my 302

    Will they be okay with the EFI?
  7. onebad7up

    Heads from a 85 351w on my 302

    He also has some 1969 windsor heads with 190/160 valves. Which one would be the better/ easier to install on my car. I need to pass emissions as well. Thanks
  8. onebad7up

    Heads from a 85 351w on my 302

    My neighbor is trying to sell me his 351w heads because he wants to buy some aftermarket ones. Would these work on my 90 efi 302? I would get them if I new I could just bolt them up, but I dont want to get them if it going to involve a lot of work. Would these flow better than my stock heads?
  9. onebad7up

    deck surface cleaning

    If you use the angle grinder make sure you keep it flat so that you have an even surface.
  10. onebad7up

    Well... she's painted....

    Looks sharp. It is a good feeling getting the stang back after the fresh paint. Can't beat that for 470.
  11. onebad7up

    7up identification/Modify, or not?

    The 7 Up is more than your average vert. it is also the true 25th Anniversary car. It is also a wonderful color combination when compared to the yeloow or white special edition verts. They are a special car but they just do not have the following right now. This is like every classic car...
  12. onebad7up

    Should I sell the nitrous?

    I think I am going to go ahead and sell it so that I can get the sc. The kits seem pretty easy to install. This nitrous kit seems to difficult. I do not think I could run both. I do not plan on rebuilding the bottom end anytime soon. Superchargers seem less violent.
  13. onebad7up

    Should I sell the nitrous?

    I just recently got a Nitrous Express kit. Now I have been looking at a supercharger but I don't have the money. Should I sell the nitrous and use that 250 or so on the supercharger or should I stick with the original plan? I know a lot of people have ran nitrous as well as a supercharger, so...
  14. onebad7up

    My car has got the hickups....

    Is that the same thing as a Pick-up Coil? If not, where is it? I tried to explain it to the guys at advacne and they didnt know what I was talking about. Does it go by another name?
  15. onebad7up

    My car has got the hickups....

    Nothing showed up in the codes. I have put two sets of rotors, caps, and wires on within the past two weeks. I have also put on a new fuel filter and the control module on the distributor. It is still bucking when it gets hot. The next options are : 1. Throttle Position Sensor 2. Pick up...
  16. onebad7up

    Where to read timing marks???

    Okay. I just got an old Mac gun with the advance knob. Do I just set the knob to 13* and then line that mark up?
  17. onebad7up

    Where to read timing marks???

    Once I fill in that dipped spot with white pen what do I line it up with? I see that little piece of metal with a whole in the bottom and then a pointed area at the top. Am I supposed to line that white line up in that circle?
  18. onebad7up

    Where to read timing marks???

    I just got a new timing light and I am trying to set the timing on my 90 5.0. I stood on the passenger side and shot the light down at the crankshaft pulley but I didn't see anything. Where would I read from? Usually there are marks that tell the degrees but my car doesn't. Am I looking at...
  19. onebad7up

    Question for 7-Up experts...

    The factory color is gray. It matches the kickpanels and door pockets.
  20. onebad7up

    Ping at idle , due to plug heat range or something else?

    Since you cant see thee marks to set the timing, how do you know if it is 12*? I cant see any numbers on mine. I really need to set my timing right, but I do not understand how to do it.
Top Bottom
Back
Forums
Menu