Search results

  1. onebad7up

    Its the starter ..but not the starter...help

    Another thing to look out for is that your starter wires aren't touching anything. When I put my starter on after I got my longtube headers on, I accidently had the shim siutting against the header. When I tried to start it I heard a spark and then it would not start anymore. So make sure you...
  2. onebad7up

    How much to lower car? 1 inch or 2 inches

    yea i went with the ford motorsports lowering kit and it dropped it about 1.5. My car scapes a lot so i wouldnt go any more than that. Another thing is that I have longtube headers so that cuts my clearance down also, but I definitely think 1.5 looks good.
  3. onebad7up

    taking out my dash

    If you want to do a good job you have to make sure you clean EVERYTHING. After that buy a can of Bulldog. This is a must if you want the paint to last for a while. It etches into any material and allows the paint to bond with it.
  4. onebad7up

    taking out my dash

    I just got finished putting my dash back together. It isnt too hard but you have to know what you are doing, because there are a lot of pieces. You have to make sure you keep track of where everything goes. I have a white interior and I repainted some of he plastic pieces white. The key to...
  5. onebad7up

    OIL Sending Unit?

    ok thanks I think i will go ahead and ge the auge, but I should probably go ahead and run the codes. thanks
  6. onebad7up

    OIL Sending Unit?

    My 90' vert has been leaking oil lately and I put new valve cover gaskets on it and a new oil pan gasket. The rear main is not leaking, but it is still leaking. When I drive my car the oil pressure gauge reads a little less than half way, but after about 5 minutes my check engine light will...
  7. onebad7up

    Overheating At The Track

    When I was at the track last week My car started to heat up when I was waiting in line for my time trial. i left the car running and my temperature continued to rise. My 1/8th mile time was 10.7, which is a second more than i usually run. I was wondering how I would go about finding out if it...
  8. onebad7up

    1st Time at the Track

    So a wet nitrous system with a 55 shot wouldn't dohardly anything to my motor?
  9. onebad7up

    1st Time at the Track

    I have a 5.0 Mustang Conv without any major mods, but one my first time trial I had a 10.86 1/8th of a mile. This truck that raced against me ran a 10.37, so needless to say I was very mad. The next time I ran it in 1st gear then shifted it up to D. This time I ran a 9.89. Does anyone know...
  10. onebad7up

    Which Mass Air and Injectors?

    I have a 5.0 with the mods listed in my signature, and I wanted to get a little more power out of it. Should I put a bigger Mass Air Meter and bigger injectors on my car? If so, what size should I get? And what size do I already have?
  11. onebad7up

    needs a new stance, springs

    I just put lowering springs on my '90 vert and it made a world of difference on the look. I found some Ford Motorsports Lowering springs online for only $130 shipped. They don't give the performance of the eibach but they give ya a smoother ride. I love em. They dropped the front like 1.5...
  12. onebad7up

    Longtube Headers Bringing Many Problems

    They are an OK header but it might just be the way I put them in. So don't jusge them off of me because this was my first time.
  13. onebad7up

    Longtube Headers Bringing Many Problems

    No they don't touch but they are black. I probably shouldn't have gotten these headers but I couldn't beat the price. They were $70, which included shipping. All of the long tube headers I saw were like $400, so if I need to do a little welding to seal em up it was well worth it. What...
  14. onebad7up

    Longtube Headers Bringing Many Problems

    re I dont know the brand because I got them off of ebay. The tubes slide in and connect to the main section down by the cats. How are long tubes installed if they are not cut, because it was hard for them to fit even though we did cut them?
  15. onebad7up

    Longtube Headers Bringing Many Problems

    Has anyone installed Longtube headers because mine had to be cut into sections. Now that they are installed they are leaking and it doesn't sound as it should. I was just wondering if I have made a mistake by going with the longtube instead of the shortys.
View older results
Top Bottom
Back
Forums
Menu