Search results

  1. J

    No Spark, No Start - going to cry.

    heres the short version of the story: - blew head gasket, pulled heads - hooked everything back up, no spark - i have 12v reference going to coil (MSD blaster) - tested coil, has proper primary/secondary resistance im thinking maybe i missed a ground for some part of the ignition ? i...
  2. J

    One for the century.. almost too embarrassing to talk about

    I have an RNH 347 that I had JUST got running after almost a year (build was stunted due to lack of funds) of getting together. The problems I ran into were never ending. All ranging from incorrect fly wheel, stuck open injector, hydrolocking, sulfated battery, distributor 180out, incorrect...
  3. J

    new engine - runs HORRIBLE

    I adjusted according to FTI's website - wait for exhaust to open, adjust intake / wait for intake to almost close, adjust exhaust.
  4. J

    new engine - runs HORRIBLE

    engine was primed prior to starting. lifters are pump up - i had it running for a total of about 5 hours before not running today.
  5. J

    new engine - runs HORRIBLE

    im chasing my tail. installed RNH 347. had to work out some firing issues (dizzy 180 out/firing order/messed up MSD box). after doing so, the car ran OK. it missed and would hold idle sometimes - but it ran. I figured it was because the valves need to adjusted. trackheat heads, stock (new)...
  6. J

    new engine - runs HORRIBLE

    im chasing my tail. installed RNH 347. had to work out some firing issues (dizzy 180 out/firing order/messed up MSD box). after doing so, the car ran OK. it missed and would hold idle sometimes - but it ran. I figured it was because the valves need to adjusted. trackheat heads, stock (new)...
  7. J

    still running rough after engine install. HELP :/

    im going to make this as short and simple to follow. I installed an RNH 347. Its crank is set for the REGULAR 5.0 firing order (1-3-7-2-6-5-4-8). my stock 93 lx 5.0 computer is running the HO firing order (1-5-4-2-6-3-7-8). So initially, it was running off of 4 cylinders due to the fact that 4...
  8. J

    OH GOD I WANT THIS!!!!!!

    im with melvin. wow.
  9. J

    Spacer help (new wheels)

    I just put on 9" 03 Cobras to my 93 fox. They are fine in the back, but the front is what im more concerned about. They arent touching but theyre awfully close.. .010 close. I havent driven it yet, and i KNOW i need to put spacers - but will i blow out the shock by driving it (lateral motion ?)...
  10. J

    where'd you buy your cowl ?

    im in need of a cowl due to my addition of the TF track heat intake/1" spacer. I heard 4" is a bit much so im thinking about going with a 3". where should I pick mine up.. and how is your field of vision with the 3" ? just as bad as the 4" orrr should i go with a smaller ?
  11. J

    Xpipe holding up TRANS

    installed new engine, mounted BBK Xpipe to FRPP shorties.. and now I have a problem. The xpipe sits at an angle where its hangers that mount through the trans bracket hold the transmission up so high, the studs on the trans wont go through the trans member. im about to cut those hangers. i hate...
  12. J

    Car wont fire -- GOING TO CRY

    Rick actually built the shortblock, so im not concerned as of that. my main concern is spark. did you have an issue with your spark by chance ?
  13. J

    Car wont fire -- GOING TO CRY

    actually - i chucked the old coil :bang: so im going to pickup an OEM one today and see how that goes. i hate life :/
  14. J

    Car wont fire -- GOING TO CRY

    i did rehook everything, first time around. MSD makes it so easy its ridiculous. i bought this (below) harness from them so all installation is - is plug and play.
  15. J

    Car wont fire -- GOING TO CRY

    I DO have a signal to the old factory ignition, and when I had the MSD hooked up - I had one as well. everything is grounded (to block/head/neg cable). the blaster coil is BRANDNEW out of the box, so I was suprised as to it not working.
  16. J

    Car wont fire -- GOING TO CRY

    This is how the story goes - Just got done installing engine, tried to crankover last night.. no start. I figured it wouldnt start upon first try, so I checked the essentials. There was plenty of fuel, checked timing - it was off. So i repositioned the distributor (properly, i checked) and...
  17. J

    the site for pulley sizes

    the fan/crank have under drive pulleys.. the alternator is stock
  18. J

    the site for pulley sizes

    ive seen it on here, but im not sure where. im deleting smog on my 93 lx 5.0 - and i need to know what size to get. i ordered a 84.5", and either the wrong belt was sent.. or thats not the right size. i searched and found too many numbers to decide on, help me out ?
  19. J

    what isss this for ?

    where do i run it to ?
  20. J

    what isss this for ?

    im putting my engine back together and i KNOW this is a dumb question but im far too tired to think.. so im hoping all of you on the west coast who have a couple hours on me can help a brotha out :] whats this elbow for.. EGR ?
Top Bottom
Back
Forums
Menu