Search results

  1. 67GTCOUPE

    Finally took oil pan off.........

    Stock truck rods, with ARP wavelocs.............heard these were bulletproof by many...........guess they aren't?!? :rolleyes:
  2. 67GTCOUPE

    Finally took oil pan off.........

    Finally had time to pull the pan off my 351W with 600 miles on it that had #7 piston tap my head after a few 6000rpm limiter bounced runs. The bearing spun and one shell was essentially riding on top of the other...hence the sloppiness and tapping. Both shells have their ends...
  3. 67GTCOUPE

    Auto Tranny makes squealing noise!

    It has less than 60,000miles. When I took it apart to do the 1-2, 2-3 acc piston changes, I found the 1-2 spring was broken and there was shrapnel in the bore....?weather any of this got into the clutches? I think/hope the filter would get it? Anyway, I might try the lucas stuff....is it...
  4. 67GTCOUPE

    Auto Tranny makes squealing noise!

    I just noticed yesterday that my auto tranny makes a squeal like a loose fanbelt on wide open throttle shifts. I added a cooler and switched over to mercon v as well as replaced the 1-2 accumulator and left out the springs in the 1-2 and 3-4 accumulators. I think it is clutch pack...
  5. 67GTCOUPE

    FORD RACING LONGBLOCKS

    Toooooooo expensive. Build your own for way less.
  6. 67GTCOUPE

    for those who can't decide 3.55 vs 3.73

    OK......possibly going to 4.10's in a 94GT vert.....would I need a chip? or can I just get a new speedo gear??? Thanks
  7. 67GTCOUPE

    for those who can't decide 3.55 vs 3.73

    I have 2.73's in our 94 Vert......it is a dog, but I am worried about going to 3.73's due to the possible need for an aluminum driveshaft, plus I ??will?? need a new spedo gear? What is the deaL?
  8. 67GTCOUPE

    Help me build a 351w/393/408??????

    So Eagle is all American made????? That certainly changes my outlook on things if that is the case........I will try and buy American any day of the week!
  9. 67GTCOUPE

    Help me build a 351w/393/408??????

    Dartman: you make a good point, many people will think that same thought, but, I can assure you it is not an oil related failure. I will try and post pictures when it is out and in my hands. Any way, I owe you an appology for the poor choice of words to respond to your shortblock...
  10. 67GTCOUPE

    Help me build a 351w/393/408??????

    Thank you. That is good to know. As far as buying a used engine that has track time.......I am leary......when you have $7000.00 plus into paint, I hate to chip or ding it with an engine removal. This is why I am hopefully building a bulletproof motor that will outlast the car. Perhaps I...
  11. 67GTCOUPE

    Help me build a 351w/393/408??????

    Thank you. It was a really nice motor.......just around 400hp at the flywheel. It really, really got a little 67 moving.
  12. 67GTCOUPE

    Help me build a 351w/393/408??????

    :flag:
  13. 67GTCOUPE

    Help me build a 351w/393/408??????

    Everyone and their grandma is selling 408's.......BUT most people are selling chinese cast stuff.....I am wondering how this stuff stands up? I was looking to get manley or crower rods, manley or je/slp pistons, and I am hoping for a forged crank with King bearings all around.....but I will...
  14. 67GTCOUPE

    Help me build a 351w/393/408??????

    Not real sure.....bottom end is in engine bay awaiting my removal.....had #7 piston tap on my aluminum head after a few hard 6000rpm rev limited (msd 6al) runs. It was a completely fresh motor with 500 to 600 miles on it. There is slop in the rod bearing, so it needs a rebuild. This is in...
  15. 67GTCOUPE

    Help me build a 351w/393/408??????

    :flag:
  16. 67GTCOUPE

    Help me build a 351w/393/408??????

    :flag:
  17. 67GTCOUPE

    Help me build a 351w/393/408??????

    I have a 1996 roller 351W with Edel RPM intake and Heads, Trick flow stage 1 cam, Quick Fuel Provac 750 carb, had stock rods with arp bolts and stock pistons. I have Ford racing SFI balancer, Ram billet flywheel, yada,yada... Anyway, a rod bearing has ***** the bed! 500miles on this combo...
  18. 67GTCOUPE

    Help me build a 351w/393/408??????

    Wow....nobody knows how to build these things????
  19. 67GTCOUPE

    Help me build a 351w/393/408??????

    I need to rebuild my roller cam 351w due to a bad rod bearing. So, I want a 450hp street motor that will last and last. Money is TIGHT. What to do and who to buy it from? :shrug:
  20. 67GTCOUPE

    need mach 460 info and help!!!

    So you can just wire it up? You don't need that converter/adapter thing with the three adjustable pots???
Top Bottom
Back
Forums
Menu