Search results

  1. J

    Anything to replace the actual ashtray with on a '87-93 besides a switch panel?!

    I'm up for one as well!
  2. J

    89' e303...hard intake backfire

    Mine does the same thing, Smells like gas bad at idle but has the lean backfire through the intake when you rev it. On an otherwise stock car, what is the solution to getting it more fuel. The previous owner installed the e-cam in mine without any other supporting mods. The FPR and...
  3. J

    vaccum line question

    Do the canisters ever wear out? Mine is hooked up but i'm still getting the gas smell.... 88 5.0 Jeff
  4. J

    Please Help with codes and FP question.......

    UPDATE! Well, I broke down and got a new TPS. After probing it wit a meter, it didn't seem like the voltage climbed very smoothly when openning the throttle. Made a Big difference is driveability! Then I got the chance to check out the engine bay when it was pitch dark out. Looked like a...
  5. J

    Please Help with codes and FP question.......

    Wow! If it wasn't my car, I'd be proud to say I've got you stumped..! The car still has a heck of a gas smell. Maybe the valve is plugged. Like I said in my last post, If a car still has the stock valve springs and they are weak or at least too weak for the E-cam, or maybe not adjusted...
  6. J

    Please Help with codes and FP question.......

    OK, Took a few days to get back to the car, 63 code fixed. The only codes given now are the 94 and 44 KOER due to smog equipment removed. Vacuum at 900 is 16 in. at 1000 it goes to 17in and at 1500 it went up to 19inches. Idle is at 900, pretty steady,not much hunting at...
  7. J

    Please Help with codes and FP question.......

    will do......I'll post back after I clear the 63 and test the canister line. Wont be till tomorrow though. thanks
  8. J

    Please Help with codes and FP question.......

    Cool, I'll keep looking for any small leak, if I have one. How can I tell if the line form the canister to the tank is plugged. I replaced the hoses from the manifold to the valve, valve to the canister and canister to the hard line going into the firewall. Where is it routed from there, so...
  9. J

    Please Help with codes and FP question.......

    Vacuum at 1000 rpm is 16. hose is good to the Map sensor. If the Purge valve is bad, wouldn't it throw a code. Is that a major cause for the fumes from the car.......?
  10. J

    Please Help with codes and FP question.......

    OH, And like many others have posted, this beast will choke you out of the garage quick with the gas smell from the exhaust even with all the doors open. I was really hoping to have the charcoal canister valve thing come up in the codes so I could remedy some of that problem. But since...
  11. J

    Please Help with codes and FP question.......

    Thank you Jrichker, It's your Massive amount of info that has gotten me this far so far. It looks like I didn't finish the balance test so will repeat that test and see if # 6 remains an issue.... Since the thermactor pump has been removed I figured I didn't have to worry about the 94...
  12. J

    Please Help with codes and FP question.......

    Hey all, As you can see I'm pretty new and just getting back into hod rodding after a long time off so let me apologize for the length in advance. I have an 88 GT with what I believe to be a stock Speed Density 5.0 5 SPD, except I was told by the previous two owners it as an E-cam in it...
  13. J

    Help removing broken bolt please!!!

    That would be a great Idea! if I had a mig welder.... I was planning on picking up a larger vise grip today sometime.....It also occurred to me I might be able to use my Dremel and cut a groove in the top of it and try to get it out with a large screwdriver. Man this crap makes me mad:nonono:
  14. J

    Help removing broken bolt please!!!

    OK, upper intake bolt, one of the long ones has snapped off and is sticking out of the lower about 3/8". Not enough to get two bolts on to try to back it out that way. It's in there pretty tight, I clamped a small pair of vise grips on it but the little bit of force they will grab with is not...
  15. J

    FPR remove and replace ?

    Will do, Thanks for the help:nice:
  16. J

    FPR remove and replace ?

    FPR, Easy way to remove and replace ? Hey all, Ok after an hour of tedious, tight work I got the FPR off the fuel rail. My question is..... Just how much do I have to take off, to make it possible to get the FPR back on??? I unplugged and removed the EGR to access it but left the TB and...
  17. J

    It's taking forever to get to 500!!!!

    Well! looks like the consensus is I've waited too long! lol. Time to burn up some tires!!:nice:
  18. J

    It's taking forever to get to 500!!!!

    Put a new clutch in and it says to drive it for 500 or 1000 miles before doing anything crazy. Seems like it's taking forever to get there!!! Almost 300 so far! this is killin me:mad:
  19. J

    Opinion on Ebay seller?

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trkparms=tab%3DWatching&item=400046469185&viewitem= Sorry forgot to add........
  20. J

    Opinion on Ebay seller?

    Anyone ever buy anything from this place? They've got good feedback and it seems to be a great price for the shocks and struts........ Thanks Jeff http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trkparms=tab%3DWatching&item=400046469185&viewitem= DUH........ sorry
Top Bottom
Back
Forums
Menu