Search results

  1. K

    Can someone do a carfax for me please? ex-ssp mustang?

    Wanted to know the history of this car, just picked it up, if anyone can run this for me it wil help a lot. # 1fabp26m0gf247090, thanks in advance.
  2. K

    Replacing Motor mounts?

    Just swapped out my stock replacement mounts I bought from autozone for some drop mounts. I can let them go very very cheap as I wont be using them anymore, less than 300 miles on them, need a pic, let me know.
  3. K

    Cervinis Cobra R hood will not shut.

    UPDATE. Just installed a set of solid drop motor mounts as well as moving the engine forward and problem solved. Thanks for the responces, I hope that is the last problem I have with the car, I am getting to old to crawl under it.
  4. K

    TKO Swap Becoming A Nightmare

    I had a simular problem when I installed mine. The clutch pivot stud was to short, I needed one that would put the fork and to bearing closer to the pp. If I remember correctly, I added 1 inch of length to the threaded area, and used a few lock washers. That solved my problem, I was also...
  5. K

    Cervinis Cobra R hood will not shut.

    Well I think I figured out my problem. I am also using the qa1 k member, and it has two positions for the motor to sit at. I used the farthest one towards the back, I think thats why it hits only the rear of the hood. I am going to try out a set of drop mounts, I really do not want to slide...
  6. K

    Cervinis Cobra R hood will not shut.

    Hey parchisi, I am surprised your hood shut. I tried to put a little weight on mine and i heard some cracking. I think I will try some drop motor mounts.
  7. K

    Cervinis Cobra R hood will not shut.

    Just finished the fox throttle body swap, also swapped out the cobra intake for a trickflow R, and swapped the 98 style Cobra hood for the cervinis R hood. The problem I am having is the rear of the R intake is hitting the rear of the hood. Has any one ran into this problem before? My engine...
  8. K

    Trick flow r or victor jr on 351w?

    thanks blackvert, i will check out that site. I just put the tf one, and it looks much better than the cobra, hope it runs that way to..
  9. K

    Trick flow r or victor jr on 351w?

    Engine is a 72 351w 40 over, ported roush 200 heads, 1.7rr,dss flat tops, eagle I beam rods with 351w ported lower and cobra upper. sollid roller cam adv dur I 273, E279,@050 I236 E242, Valve lift I 603, E609 @112. I bought a Tf R upper and lower to replace the cobra intake. I had the TF...
  10. K

    stonger rear?

    Have you looked into an 8.8 with 9" housing ends? And yes, the explorere does carry the 31 spline trac loc unit.
  11. K

    any way to do away with abs

    I removed mine while my car was apart, along with the power steereing, air bags, and related wiring. I am sure you can disconnect everything, but I pulled out a chiltons manual and removed all associated control modules, sensors and wiring from under the dash and in the engine bay then had to...
  12. K

    Has anyone had any experiences god or bad using a vortec mas air meter

    Wow I misspelled Good, sorry.
  13. K

    Has anyone had any experiences god or bad using a vortec mas air meter

    I am considering buying one of these units. Just curious if these units work well or not. Thanks.
  14. K

    How to remove abs system

    I am currently finishing up the tear down on my 95 cobra and decided that i will not be using the abs system when I put it back together. The unit that I would like to remove is on the lower front pass. side, next to the radiator. Is removing and not using the unit as simple as it seems, or is...
  15. K

    Deleating powersteering and A/C questions

    Has anyone ever deleated their power steering and A/C on an sn95 with a 5.0? If you have please list parts, pictures, or any other info that would help out. Thank ahead of time.
  16. K

    Wiring harness from 90 5.0, will it work on .....

    I just picked up a wiring harness from a 1990 5.0 mustang along with the computer. I only had time to take the section that begins at the brain box, and ends on the drivers side shock tower, and includes the injector section. I was not able to get the front light harness, or any section from...
  17. K

    who has done it? AWD Aerostar aluminum driveshaft

    The brand of U joints were PDQ.
  18. K

    who has done it? AWD Aerostar aluminum driveshaft

    I bought three of them for 50.00 each, and sold one for a hundred bucks. I will tell you guys that there is a couple of things that you need to be aware of when, and if you decide to go in this direction. The driveshaft you need must be from a 4wd aerostar and have the factory recall...
  19. K

    Gear drive timing gears

    Also, if the car did not come with a knock sensor, can i go ahead with a gear drive? Any using one?
  20. K

    Gear drive timing gears

    Well maybe I am a bit confused on my parts. The item that is in question is screwed into the side of the oil pan. Any idea what it is?
Top Bottom
Back
Forums
Menu