Search results

  1. triostang

    6 speed or 5?

    I just found one on ebay, http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7920746640&category=33733 what do you think? thanks for the help
  2. triostang

    6 speed or 5?

    a found a used one from a guy, but never used it. he got a g force instead, if i need to i will get a new one, but the used one is cheaper and i was hoping of going that direction.
  3. triostang

    6 speed or 5?

    I found a 6 speed that i want already, richmond, think its good? i realized that is the same one i think as gp001's
  4. triostang

    6 speed or 5?

    thats one of the first thing that poped into my head, im up for it.
  5. triostang

    6 speed or 5?

    I am seriously considering a tranny swap, from my stock fmx to a tremec 5 speed or 6, within the next few months. I can find a donor car for parts but I wanna go for 6 speed. Is there a big difference between the 5 and 6 speed swap? Do you go about and do them both the same way?
  6. triostang

    302 headers

    so 351w headers will fit on a 302 just 1" lower? its a 72, so plenty of space. so chances are they will fit a 302 if not then i guess i'll put them on my 69's 351 (still a rust bucket)
  7. triostang

    302 headers

    sorry to butt in but will 351w headers fit on a 302? (cylinder heads fit on both so wouldnt the headers too?) sorry, i just have no idea
  8. triostang

    Fiberglass Hood

    Since you did buy a racing hood then you will have to put four hood pins on each corner, thats what it says at carhoods.com where i was looking for a fiberglass hood for my 72. I would go for the 4 hood pins
  9. triostang

    car cranks but wont start, and thats not the problem

    As soon as i can i will probaly replace all of it with new solenoid and wires. Hope I can get this done this afternoon with my job all.
  10. triostang

    car cranks but wont start, and thats not the problem

    I'll try that as soon as i can, thanks for the replies, and help
  11. triostang

    car cranks but wont start, and thats not the problem

    The solenoid looks new(but i cant be saying its good just b/c it looks do i?) And im not sure about the wires, none of them are cracked or cut anywhere. I replaced the ones that were in bad condition like that
  12. triostang

    car cranks but wont start, and thats not the problem

    ok, so i had ordered some alternator feed but every seems to be on back order. And i need to drive the car so i decide to rig up something for the mean time. When i finally finish i try to start it and it cranks but no start. No gas was getting to it so i pump the gas to get a little fuel...
  13. triostang

    ATI Procharger

    can you post the link to the carb'ed ford kit, i looked in procharger but couldnt find it. maybe i just have bad eyes:shrug:
  14. triostang

    rear fold down seat?

    with 71-73's rear fold down seats (sportsroof), would i be able to convert a coupe to one? if i had the setup off of another car. do you see this being possible? This guy is selling the whole fold down rear seat setup.
  15. triostang

    alternator instruments?

    i have been looking for alternator feed for my 72 (doesnt have the factory tach or the extra guages) and i found one off of mustangs plus but they dont have it. now i found one on metro mustangs but it says with or without instruments. Do i get the one "without" instruments? thanks
  16. triostang

    alternator suggestions?

    thanks i really appreciate it, since i have a/c, radio, lamps, etc it adds up to more than 140 i guess i can go with the 200 amp then?
  17. triostang

    alternator suggestions?

    so it would be ok to get a 200 amp alternator, or is that too much?
  18. triostang

    alternator suggestions?

    My car will be running electrical water pump, 28 amp twin fans, big soundsystem. Since i'll be replacing my alternator i was wondering if you guys know which altenator to get. i was thinking power master, but which one? if i get one with too many amps is that bad? thanks
  19. triostang

    Drop Springs + UCA Drop = still too high. any recommendations before I cut my coils?

    when you say they recommend cutting the coil does that count for the 620 1'' drop coil springs?
  20. triostang

    Drop Springs + UCA Drop = still too high. any recommendations before I cut my coils?

    i have the same problem with the front sitting to high, i was going to cut the coil however much i would thought the right height was, but then a friend told me that the bottom front tires would lean inward with the top outward ( i dont know how much but just the thought of it scared me) Is...
Top Bottom
Back
Forums
Menu