Search results

  1. broken_joke

    car is totaled!

    no i didn't take pictures. it sits in the driveway.
  2. broken_joke

    car is totaled!

    yeah, but i can't hold it over him. it could have been worse, we coulda went nose first into the tree. so the insurance companies usually don't let you buy it back?
  3. broken_joke

    will my tweecer work in a new model mustang?

    will my tweecer work in a 96 and up mustang? the car was totaled yesterday and i am going to look at maybe a new mustang and was wondering if the tweecer will work or not? thanks
  4. broken_joke

    car is totaled!

    me and dad went for a ride in my car yesterday and i let dad drive it cause i wanted his opinion on how it was running. well we were pretty much hauling some serious ass and were getting on the interstate and hit a patch of water on the top of the acceleration lane. the car came around and...
  5. broken_joke

    thinking about going n/a again

    you couldn't rig up something from an 03 cobra intercooler wise? they run roots type blowers with intercoolers right?
  6. broken_joke

    thinking about going n/a again

    if it's not difficult change back to n/a i'd keep the blower and use during the colder months were the intake temps should be lower. or maybe you could sell those parts and start building up a little stroker motor? :shrug:
  7. broken_joke

    I got my tires in today.

    nice!!!
  8. broken_joke

    I got my tires in today.

    what rims are they goin on?
  9. broken_joke

    High idle with timing change

    i just went outside turned the car on out of curiosity and tried messing with that scalar and it didn't do anything. i tried changing all the rpm scalars and it didn't do anything? it stayed and idled right at 1000? i took the car out of cl loop and everything :shrug: i might have been high on...
  10. broken_joke

    wanting to build 357 long rod

    rbohm:shot peening the rods, i'll probably get that done before they go in. i guess never hurts to add a little strength.thanks bnickel: the engine has afr 205's, a victor jr converted to f.i., and a comp cam xtreme fuel injection cam (236/248 579/579 114lsa) don't have any new numbers. old...
  11. broken_joke

    High idle with timing change

    mine is set at 150. i think it adds that number to your idle? jake
  12. broken_joke

    High idle with timing change

    i had a similar problem with idle and the isc cl above idle rpm scalar was set kinda high. hope it helps. jake
  13. broken_joke

    wanting to build 357 long rod

    that's good to know!! i don't think i'll spin that high, but i hope to make more power and not have to worry about the rods! thanks jake
  14. broken_joke

    wanting to build 357 long rod

    i have stock 400m rods i just need pistons and a few other odds and ends. my question is what hp level will these rods handle? my cast rods in the car now are holding up to 400+ rwhp. will 400m rods hold more? these rods look a little bit more meaty than stock 351 rods. thanks jake
  15. broken_joke

    Noob Tweecer user in need of help!! Long kinda

    gimme your email address and i'll send you what i got.
  16. broken_joke

    Im wondering if anyone else has this problem at the moment...

    crawfish boils and beer go together like chips and salsa. you really can't have one without the other!
  17. broken_joke

    Noob Tweecer user in need of help!! Long kinda

    we have a similar setup besides the tranny. i have the maf flow numbers/volts for your 76mm c&l for 42's. hit me up if you need it. i have used both prom and c&l and tweaked on both. be patient!!! i was almost about to put my custom chip back in after a few days of trying to tweak! it will...
  18. broken_joke

    water pump hoses for 351

    i cut some regular straight hose, and then used a big elbow attachment from the garden section at home depot. looks funny but works!
  19. broken_joke

    detunning the 351w

    i noticed the same thing also about being rpm sensitive. i have made datalogs of runs on 60 mph roads and the mileage is great 19-21 but as soon as i am at 75-80 on the interstate it drops to about 14-15 with a very light right foot.
  20. broken_joke

    WHERE IS MY POWER?? NEW ENGINE INSTALL

    i think a tune and 24's should be considered
Top Bottom
Back
Forums
Menu