Search results

  1. SoldMySS4a5.0

    Stroker street/ strip guys- I need suspension help!

    I do have adj cpntrol arms with the pinion angle set at 3. i am running m.t. drag radials 26". i am going to go to 28" and get the susu\pension. thanks
  2. SoldMySS4a5.0

    Stroker street/ strip guys- I need suspension help!

    My 60' times have went to crap. I am still running the stock suspension ( i do have lca's and sub connectors). They actually were not that bad when I first built the car (high 1.60's). Anyway, tonight 1.90 was all it had and I could not even spray off of the line without the rear end breaking...
  3. SoldMySS4a5.0

    Nitrous in Aiken/ Augusta?

    What's up BlackNotch? I actually live about 1 mile from the Dragstrip. I just got my car built. I haven't been there much since I sold the SS. As soon as I get my car painted, there will be another black notch in the area (it is white as of now).
  4. SoldMySS4a5.0

    Nitrous in Aiken/ Augusta?

    Where can you get nitrous around here? (Aiken, Sc- Augusta,Ga area.)
  5. SoldMySS4a5.0

    Yellow Conv. Cobra in Augusta, GA area

    Anyone know who drives a newer (looked like an 03) yellow Conv Cobra in the Augusta Ga/ Aiken, SC area?
  6. SoldMySS4a5.0

    How to stop valve chatter?

    retard the timing--put in octane boost, or both.
  7. SoldMySS4a5.0

    Help me decide about this 88 GT!?

    tell the guy to fix the oil pump shaft. if the car works, then tell him you will give him the price of the car plus the fix.that way you won't be stuck with a motor that took a ****.
  8. SoldMySS4a5.0

    347 in next Tuesday, 302 dyno'd today

    5.0droptop--you running an aod? Most of us southern boys also don't dyno using corrected hp. It was 95 degrees yesterday with 98% relative humidity. I am certain if i had dyno'd in that sweet, cool Indiana air the numbers would have been higher. we don't "dyno race" here. We use it to make sure...
  9. SoldMySS4a5.0

    347 in next Tuesday, 302 dyno'd today

    Forgive me guys, It took a few more days than expected. I finally got the car on the chasis dyno today. 343 rwhp 340 ft lbs of torque. 441 rwhp on the gas 430 max tq. Grn92Lx-- In a nutshell, Eagle 347 stroker kit, Edelbrock performer heads with RPM 2 intake ,XE 282 cam. BBK headers. 9 1/2 "...
  10. SoldMySS4a5.0

    347 in next Tuesday, 302 dyno'd today

    I finally have my 347 stroker put together and will be installed next Monday/ Tuesday. I expect to do dyno pulls on the 347 next Tuesday evening. Today, before I pulled the motor. The 302 with 215,000 miles actually put down 206 rwhp and 258 Ft lbs of torque. I wanted to see the before and...
  11. SoldMySS4a5.0

    Went to the track for the first time (pics)

    keep your ac man. a waste to take it off.:nono: :bang:
  12. SoldMySS4a5.0

    Went to the track for the first time (pics)

    Grasshopper. You have alot to learn. I would gladly line up with you at the track and show you how much I will jump you on the line. I would retard my timing so my trap would be the same as yours. That would make a believer out if you with autos. Other than spinning (in which I wont), I have no...
  13. SoldMySS4a5.0

    Went to the track for the first time (pics)

    I know you dont want to hear this but build a strong AOD; have the shift points set correctly with a good stall and keep the 4.10's. 14's all day. I would bet 14.30's with a good launch on drag dadials. I don't know what your budget is but you can get cai for about 100 bucks. Get some new plugs...
  14. SoldMySS4a5.0

    4:10s...

    I have had both. 410's are by far better for fun and bottom end. go with them unless you do alot of interstate driving.
  15. SoldMySS4a5.0

    Engine builders enter ??? on a 347 using most stock parts

    To do a 347 right, look to spend $6500-7000 (that's using the stock block). That will get you anywhere from 360-385 rwhp. On top of that, 100 shot of NOS will be fine. Don't go over 475 rwhp on a stock block. If you want more power than that, you need a dart. On motor alone, that will have a fox...
  16. SoldMySS4a5.0

    Engine builders enter ??? on a 347 using most stock parts

    By doing that, you are defeating the entire purpose of the stroker motor. Forget the stroker kit and just stick with 302 c.i. and save the cash. You could get the best heads and a small shot of NOS for the stroker kit price and come out way better/faster. As for hp, Only the dyno would know. I...
  17. SoldMySS4a5.0

    Dyno numbers are in on the 91gt 347 stroker.

    You can get 360 out of it easily. I have seen up to 380 on a stock block. 475 is the maximum you should go with a stock block. With the car running 12.8 A/f, Don't hesiate to shoot 100- 125 of NOS. You will run 10's safely. You should hit 11's now if traction isn't an issue. My set up is in the...
  18. SoldMySS4a5.0

    Side Molding on Notchback

    I am about to paint my 93 Notchback. I have never really liked the side molding on the Notchbacks too much. I know it peels right off. I have several concerns if i take it off. For one, the bumper has the molding built in so it will be even with the side molding. Therefore, there will be an...
  19. SoldMySS4a5.0

    Fuel tank capacity on a 93 notch 5.0?

    ?????
  20. SoldMySS4a5.0

    First Time...Quarter Mile...Time Slip

    I see guys run 1.5 and 1.6 short times every weekend on Nitto Dr's. If you have the 555's you will spin your ass off, no doubt. Get Nitto Dr's, BFG Dr's or MT's.
Top Bottom
Back
Forums
Menu