Search results

  1. J

    Small Block engine Pics

  2. J

    Mustang steve cobra brake mounting plates

    I would purchase the set if it was made in steel. If i design my own bracket to fit the brakes on, isn't that stealing his idea anyways. I can just take measurements and draw up some prints, but just thought maybe someone already did this. Doesn't have to be like steves, can be any one else...
  3. J

    Mustang steve cobra brake mounting plates

    Any body got prints, or dimensions for these brackets for a 67 mustang. He doesn't sell them in steel, i already asked. I would feel more comfortable using steel brackets. If you have a print or dimensions, i can just machine one out myself. thanks. Also, anybody running 18 x 9's up front...
  4. J

    Will tranny is a t45. Will it fit in a 67.

    WIll a t45 bolt up to a 302 from a 93 mustang. Fabbing i can do, but just wonderin if this will bolt up using the same bellhousing.
  5. J

    need info on rear end length

    Thanks for the help guys, but does anyone know the length of the rear end for a 94 and up mustang. It appears that the 8.8 from 83-93 have the same length rear end as a 67 and 68. Now i need to know if its the same for the 94 and up mustang or not. I have a chance to buy a posi rear end from...
  6. J

    need info on rear end length

    Ok, i've been doin a search and my eyes are hurting now from reading. I'm trying to figure out what the rear end length of all the mustangs. Whats the stock rear end length of a 67, what is it for the 85-93 mustang, and 94-97 mustang. I'm tryin to figure out if the 94-97 rear end will fit in...
  7. J

    Post pics of your wheels

    Boyd coddington timeless 5 wheels, 17 x 8 all around with 4.75 backspacing. Had to roll the lips on all 4 corners. I've got a 67 now, can someone post pics of 18's on their car, especially if you have 18x9 up front, want to see if they will fit or not.
  8. J

    67 mustang 6cylinder to 8 cylinder ? Help

    Any help guys, those of you with 18 x 9 or 17 x 9 wide tires, u guy have problem with rubbing?
  9. J

    67 mustang 6cylinder to 8 cylinder ? Help

    Got a couple of questions, i know most of the answers for a 65/66 stang, but this is my first 67 stang. Ok, i have a 67 6cylinder with power steering. I need to put the stock 5 lug spindle and hub on, what year spindle and hubs can i get. Are the 65/66 brakes the same for the 67/68, 69? Will...
  10. J

    Check my 66 Mustang

    I think the side pipes are ugly and u should lose it. Your car looks pretty stock, so keep it stock looking. Those side pipes kind of stand out and don't look good. Other than that your car looks pretty clean.
  11. J

    Anyone here with fuel injected 5.0?

    Almost the same thing i did to my car. Put a 95 motor and t5 tranny into my car. If you have a c4 in the 65 right now, then your stock drive shaft will fit as long as the yokes are the same. More than likely, they are, so don't go throwing that away yet. As for removing the ac and ps, you...
  12. J

    New Mustang 66.

    Do you have any pictures of the back, where the tail lights are. I think the thing looks awesome, only thing i don't really like is the dual supercharger, its alittle over the top for me, one is enough. Car looks pretty damn clean, any more shots of the interior. That looks clean too.
  13. J

    65/66 vs 67/68 Radiator Support

    Looks nicer if you can fabricate a new radiator support. I bought my radiator first and make the support around it. Check out the pics on my site. http://members.cardomain.com/jae902
  14. J

    Anyway to get rid of the smell out of the breathers

    Right now i have breathers over my valve covers because they make the engine look nicer. But i hate the fumes that comes out, and usually ends up inside where i can smell it. I'm about to just take off the breathers and put on pcv valves and a hose back to the carb. But that doesn't look...
  15. J

    getting a title for a classic stang

    I'm not sure how it is in kentucky, but here in california, all you need to do is go to the dmv and fill out a lost title form. There will be some late registration fees, but don't think it would be too much. The dmv should be able to tell you how much to bring it up to current registration.
  16. J

    Painting Engine Bay

    Its alot of work if you want to do it right. And trust me, do it right the first time. I completely stripped everything out. Used paint stripper to rip off the old paint, and that took forever too. But you can just clean the surface, and ruff it up with some sand paper. I filled in alot of...
  17. J

    Will brakes from a 69 fit on a 66.

    What is hard about the swap? Are the ball joint sizes different? Tie rod ends? Is it bigger or smaller, what is the difference?
  18. J

    Will brakes from a 69 fit on a 66.

    This guy is selling the spindles, calipers, rotors, master cylinder that he pulled off of his 69 mustang. Will this stuff fit on a 66? Are the lower ball joints the same size? Its a pretty good deal at 250 but i don't want to get it unless i know it will fit a 66 mustang. I haven't seen it...
  19. J

    MSD distrubutor, iron or steel gear

    Can't i just take the old one off and put the new one on using the exsiting hole? Why do i need to drill a new hole, i can see drilling a new hole if the placement of the gear is higher or lower than the old one.
  20. J

    MSD distrubutor, iron or steel gear

    I have a 302 roller cam engine from a 95 gt. I am running a carb setup on it, currently i have a msd ignition with a bronze gear. I know that the gear is wearing out. I also know that i should replace it with the steal one, but what about the iron one. Can i use an iron gear with this cam...
Top Bottom
Back
Forums
Menu