Search results

  1. chgovfk

    07 Summer Clean / Work

    You guys are giving me the 'bad' vibes about these rear rotors .........:crazy:
  2. chgovfk

    07 Summer Clean / Work

    Thanks again - yeah I figured it would be a pita - I'll try the needle nose and then like you, rent the kits .......still working on the front section, this is not my daily driver so I dump stabilize in the tank and take my time, I just take the pictures to let my family and friends back home...
  3. chgovfk

    Brake / Caliper Issues

    You should be able to bleed the brakes yourself, but I'm thinking you need to take that side at least apart and 'see' what happening - but it sounds like a caliper is broke or seal popped
  4. chgovfk

    Dealer Decals

    The best way is to simply try - with a finger nail to grab an edge and peel - depending on the 'age' of the decal, once that is done adhesive remover and then some rubbing compound, there 'may' be a shadow of the decal on your paint - hard to describe, you can see it only in certain deflection...
  5. chgovfk

    07 Summer Clean / Work

    Thanks Hurricane - Not yet - that's up next - although I heard you take a needle nose and back down the rear pistons - and that the rears were 'supposed' to be easier??
  6. chgovfk

    1971 351 W - Accessory Brackets - Ugh

    I'm trying to finish up this motor - it's a vintage 1971 Windsor out of an LTD - I've saved everything - but like a fool, when pulling it, I forgot to take a few pictures of how to reassemble the alt / pwr steering and A/C brackets that hold the gear in place - I'm going for a nostalgic period...
  7. chgovfk

    Blast From The Past - Michelin Xgt-z4

    Went home this past weekend and cleaned out my mothers garage. Found a used tire from my 1st mustang - will they ever reproduce these -- like coker tire or something
  8. chgovfk

    07 Summer Clean / Work

    Every season, I usually go through my 07 and detail everything, this year is a little different - somehow (1) one way or the other I warped the rotors - so the brakes are in the mix, started Memorial Day weekend w/the front.....thought I would share some pictures - already changed the oil /...
  9. chgovfk

    Might Be Time For A Change.

    Before I had converted to Ford - (my father was a Pontiac fan) - I thought I had hit the 'high' water mark in life when I went out and bought my 1st "$" car ....a 1986 Camaro IROC Z - black / blk interior - I had my share of work "junkers" .......this thing was mint (so was my mullet and my...
  10. chgovfk

    Should I Buy It?

    At the end of the day - you should be very happy with Your "deal' and the car you are buying - if this works for you - then do as Paul G. says - Go have some Fun w/it
  11. chgovfk

    Should I Buy It?

    Get your money back and pass on this car - $18k is not like a small amount of $$ - you could get an even lower mileage 09' / 08' V-8 for that kind of money - if low mileage, clean cars are hard to find by you - go out of state - fly in ....buy the car and drive back - get a rust free example -...
  12. chgovfk

    07 Gt Oem Brake Rotors.......$$$$need Info

    Thanks Sparta - when I dropped them off at pep boys to be 'cut' just now - I had them pull another new rotor to match them up - perfect match - so we are good - I don't know why I didn't think of that before - I'm losing it -
  13. chgovfk

    07 Gt Oem Brake Rotors.......$$$$need Info

    Hi Everyone - hope everybody has a nice and safe Holiday / Christmas w/friends and family :) - Quick question - (my work makes it mandatory to take off for this week till new years) - so of course I plan on doing the brakes on my 07' GT - I bought those Roush take offs - I even had them powder...
  14. chgovfk

    Alternator Needed For 351 W Swap Into 90 -93 Mustang?

    I'm currently building a 1971 351w for swap into a future 90-93 mustang - it's carbureted - I did have a 93 4cyl coupe on a body cart - but then sold it due to moving - and after very careful thought, I wanted to get a decent 5.0 - so no rear end swap and all the other conversion needs are...
  15. chgovfk

    Brakes Parking Brake Issue

    Welcome to StangNet! I'm sure someone will chime in here about a source or a fix - try calling your local Ford dealer - they may have a FoMoCo part number and a schematic - for that T connection bracket - but then they may only sell the complete assembly - you can't be the first to encounter...
  16. chgovfk

    07 Gt W/mutha Thumprs - Over Revs W/air On -

    - BBK Shorties - H-pipe (straight no Cats ) - to welded in Cherry bombers - they are like the 40 Flows - I love the sound
  17. chgovfk

    Best Rear End Gears For 4.6 V8

    Welcome to StangNet - Just my 2 cents - and I'm not a dragster / beat on my car type - but I love my 4:10's - if you want the feel - slam you in the back of your seat when pulling off the line - then I'd go with those - but like anything - you'll probably get a 100 different opinions - may...
  18. chgovfk

    07 Gt W/mutha Thumprs - Over Revs W/air On -

    Thanks guys - well I just moved to viva Las Vegas like 4 months ago - had to switch out the off-road H-pipe - plus drive it w/a suspended plate - b/c we switched states and insurance to Nevada - then 'pray' that I drove it enough miles to get it to Pass these God awful emissions here in Vegas -...
  19. chgovfk

    07 Gt W/mutha Thumprs - Over Revs W/air On -

    thanks Tomh - it has a canned tune - If idle is around 1200 - it jumps up to around 4500 - high sustained rev's (like it's stuck on 4500) - the only way to 'kill' it - is to come to a complete stop - sometimes - I try to double pump the accelerator - and it may 'kick' down - but for the most...
  20. chgovfk

    07 Gt W/mutha Thumprs - Over Revs W/air On -

    ok thanks - I'll look into that - but do you know what is the tuner designation is for that control?
Top Bottom
Back
Forums
Menu