Search results

  1. Grandmaster

    Rear Sway Bar? Needed?

    I just installed the suspension components in my sig and while i was at it i removed my front and rear sway bars. The car drives fine in my oppinion. Does the rear sway bar really do much anyways? Seemed like a pretty wimpy piece, so i just took it off without much thought. Not much weight...
  2. Grandmaster

    What do you use to strap the coil springs after compressing them?

    Disclaimer: I hold no responsibility for any damage to anything related to everything lol. I've seen someone say they used VERY heavy duty zip ties but i dont know if thats such a good idea. Why cant you leave the compressor in it? If its internal the rod should be able to pull right out...
  3. Grandmaster

    Whos in the wrong ( Long story )

    Yeah, mail the $5 in pennies with a bill for shipping them. LOL. -GM
  4. Grandmaster

    Yippee! Finished installing my drag suspension! (airbag psi question)

    w00t!!!! FINALLY DONE!! It feels like i've been rolling out of the bead and into the garage floor for the last week and its finally finally done. We installed lakewood 90/10s and 50/50s, an eibach drag kit w/airbag, and x2c motorsports boxer st upper and lower control arms. All i have to do...
  5. Grandmaster

    Where to install Airbag Line? (Eigbach Drags)

    Not sure how to tell, but for what its worth my eibach's are blue.
  6. Grandmaster

    How much will a new clutch kit installed cost, labor only?

    My mechanic installed my spec stage 1 kit for $170!! Shop around. I think if you dont have the flywheel resurfaced it might be a little jumpy/chattery when engaging, but i'm no expert, not even close. -GM
  7. Grandmaster

    Where to install Airbag Line? (Eigbach Drags)

    Ok. Yeah if you can post a pic that would be cool but i think i have it figured out. Right behind my bumper cover is a bracket with 2 holes already drilled. I'll locate it there. A quick question though, how did you attach the line to the car between the filler and bag? I was thinking epoxy...
  8. Grandmaster

    Where to install Airbag Line? (Eigbach Drags)

    Anybody?
  9. Grandmaster

    Rear Drag Shock Install: Sleeve Needed?

    Yo thanks a lot man, you've been a ton of help! I'll do my best to help you out in that thread, as soon as i get home from church and work. Thanks again, -GM
  10. Grandmaster

    Rear Drag Shock Install: Sleeve Needed?

    Talking about the shock (for everything previously mentioned. I didn't have any problem with the struts, the sleeves came off of the stock ones easily and swapped). My shocks have zero sleeve. Just rod and red housing. I would post pics but i dont have a digi cam. So everyone else's...
  11. Grandmaster

    Rear Drag Shock Install: Sleeve Needed?

    the strut fits fine, perfect. The problem, though, is that it did not come with a sleeve to protect the rod from dust etc. I cannot seem to pull the stock one apart. Was it supposed to come with a sleeve? Do i need a sleeve? Thats all i really need to know. Thanks a ton, -GM
  12. Grandmaster

    Rear Drag Shock Install: Sleeve Needed?

    There are no pictures on the instructions. Really, there aren't many instructions on the "instructions" either. There's a whole bag of hardware that i apparently dont need. Anyone have any idea?? This bites..... -GM
  13. Grandmaster

    Rear Drag Shock Install: Sleeve Needed?

    nope, brand new from 50resto. It came with a bag of hardware but no sleeve. I dont think i need them, anyone know??? This is really holding me back from finishing the rear. Looks like its turning into a two day job :( Its easy and stuff, but i had to stop and run up town to buy torx things...
  14. Grandmaster

    Rear Drag Shock Install: Sleeve Needed?

    I'm in the middle of installing the rear part of my drag setup. I got the rear shock out and was going to transfer the sleeve to the new shock, but i cant get it off. Is it detachable? Do i need the sleeve on the new shock? The shock is a lakewood 50/50s. We viced it and tried removing it...
  15. Grandmaster

    Where to install Airbag Line? (Eigbach Drags)

    anyone?
  16. Grandmaster

    Where to install Airbag Line? (Eigbach Drags)

    I'm going to be installing the rear portion of my drag setup when i get home (shocks, springs, and control arms) from work. Where should i run the air line for the airbag? I need to mount it so that i can easily reach it with a compressor hose, so i was thinking i might could drill a hole in...
  17. Grandmaster

    Front Springs ****!!!!!!

    Cool glad you got it in. Yeah its a pain if you've not done it before, i just finished my front setup yesterday (first time) and it was a pain. Really it would not have been that bad if i had all the tools to begin with but i ended up trying 3 different compressors before getting it figured...
  18. Grandmaster

    Best pressure for BFG Drag Radials at track??

    FTI is a flow tech induction custom cam curtosy of ed curtis. -GM
  19. Grandmaster

    Best pressure for BFG Drag Radials at track??

    I agree, 2700lbs is LIGHT for a vert man good job! I dont mean to take your thread, but you guys are saying you launch at 3000 and even 5200, do you mean you are revving it and just dumping the clutch at that rpm or do you still have to drag (feather, slip, whatever its called) to hook? Just...
  20. Grandmaster

    Short sway bar question..

    Lets say i remove my stabilizer (sway) bar. Lets say i then jack the front end of the car up. So now everything attached to the control arm isi hanging by the strut? The strut is all that holds it together since the stabilizer link bars are gone, right? Thats not bad for the strut? Just...
Top Bottom
Back
Forums
Menu