Search results

  1. smilts

    Which X Pipe?

    I really dont know much about them. I had a fix for mine so my linkage would move. I wasnt proud of it but i marked the area dropped the x-pipe and made a shallow divet about 3 inchs long it allowed clearance.
  2. smilts

    cant decide which throttlebody to go with

    Thank you I didnt know that about the jamming. the cable I picked up is not brand new but fairly new and seems in good shape. I have the EGR for the fox at home. I think Im going to go with the fox, I can always buy a adapter later if i dont like it.
  3. smilts

    cant decide which throttlebody to go with

    im leaning towards the fox, if theres no down sides. only because other than a throttle cable i have everything already. i have to either buy a throttle body and spacer, or a elbow adapter. and its actualy a bit more for the elbow adapter. i dont know that i see the hassle though, not...
  4. smilts

    cant decide which throttlebody to go with

    im trying to decide whether to use my old throttle body and a adapter elbow on my gt40 intake. or to just go with a fox style throttle body. ive actualy found a fox style tb and egr spacer for $50. i have everything else needed off of some random intake i had laying around, including a fox...
  5. smilts

    Which X Pipe?

    on the auto trans. when i installed mine before, i went with a manual. where the shift linkage bolts up. when i installed the xpipe. it wouldnt let the linkage slide back and forth to go into gear. ill look i have a picture of the problem somewhere. if i can find it ill post it up.
  6. smilts

    Which X Pipe?

    Seems like the linkage didnt like to clear the UPR o/r X
  7. smilts

    Build Thread "Rising from Ashes" 94 Cobra build thread

    Thnx fella's! only having one horn gave me a perfect spot for a wire bundle out of way of the splash guard. OnTopic, I look forward to more updates.
  8. smilts

    fuse box removal help?

    I'm trying to remove my fuse box. To clean it good. And reroute the wireing bundles. Any clues how? Just realized I forgot to mention its the engine bat fuse box, sorry. There's red pop off strips on the top do I need to remove those? EDIT: nevermind can be done without removal!
  9. smilts

    Build Thread "Rising from Ashes" 94 Cobra build thread

    Hey awesome work on the old car. But ubelievable work on this one! Was wondering did I read right way back near the start, that you ran your fuse blox wiring harness thru the fender wall? I got a little bored so my passenger side harness's are ran behind the fender now. Would love to hide...
  10. smilts

    A few questions as I move forward

    Thanks everyone for the help. I was bored and pulled my lifters as I've had a little engine noise and found 2 bad ones. So while I'm waiting on the adapter and new lifters. I've decided to relocate the wiring harness's pull the acc. Brackets and paint and clean everything.
  11. smilts

    A few questions as I move forward

    Well finished it isnt. I had all the parts except the throttble body which for some reason wasnt on the intake. he went to his friends to figure out where it got off to. i had a few hours so i painted the upper and lower intake valve covers stuff like that. Well the throttlebody is missing so he...
  12. smilts

    A few questions as I move forward

    Yup Ill have it all finished up here in a few hours. But as far as the cold air intake goes. I cant use the elbow because its hard tube all the way up to the intake and shaped to fit on a strait intake and throttle body.
  13. smilts

    A few questions as I move forward

    Well it is what he said it was but the intake and cold aire werent connected. I have a picture of the BBK cold air oddly with a new KN filter on it. Mighta been a little bit smartass with the 20 minute thing by the way. It took a hour or so and not totaly finished but close.
  14. smilts

    A few questions as I move forward

    I'm going to pick it up later today and i will post a picture then. I'm hoping its what he say it is. But he's helped me build this car so I'm sure it is. Thank you for the advice ill look for the sticky.
  15. smilts

    A few questions as I move forward

    Thank you for the advice. I'm not at all worried about the work. The intake swapj will take around 20 minutes I've had mine apart enough. As for the cold air intake. It and the upper and lower gt40 intake are all together for $150. The problem is the cold airintake is a complete hard tub...
  16. smilts

    A few questions as I move forward

    Ive finaly managed to get my 94, 5.0 running steady, and Im ready to move forward with a few things. But I have some questions. I dont know if it will help any but I have the following mods. GT40 heads and this cam http://www.trickflow.com/partdetail.asp?part=TFS-51402000&autoview=sku. Other...
  17. smilts

    no throttle response, sporatic idle

    I know this old but it turns out I had a bad connection on my fuel pump wire harness. Problem fixed thnx everyone.
  18. smilts

    no throttle response, sporatic idle

    So finaly got a chance to mess with my car again. Pulled the fuel filter hardly any gas flow through it but black sludge drained out of it. Both it and fuel pump are being replaced in the morning.
  19. smilts

    no throttle response, sporatic idle

    Sad part is the fuel pump and filter are a month old. the plugs and wires are 3 months old. i did find one plug wire for the number 8 piston that is burnt and cracked from getting near the header though.
  20. smilts

    no throttle response, sporatic idle

    I'm iffy on the fuel regulator anyway. So I'm just going to replace plugs,wires fuel pump filter and regulator se where that gets me. by the time it runs right everything will be new yay new car!
Top Bottom
Back
Forums
Menu