Search results

  1. J

    Lower shift boot question?

    Ok thanks guys.. I have a round rubber boot that covers the shifter, but not the square one that has bolt holes. This on has a big ring spring to clamp around the base of the shifter
  2. J

    Lower shift boot question?

    so basically its not that big of a deal? I got a vert and the top is always down so.
  3. J

    Lower shift boot question?

    I am doing the aode to 5spd swap and when cutting the tunnel I may have took to much material out to fit the 2 front lower shift boot screws in. How important is it to run the lower boot, do I have to ? Thanks
  4. J

    Oil pan for dart motor???

    so nobody knows a pan that fits with zero issues?
  5. J

    Oil pan for dart motor???

    Anyone else have opinion backed with first hand experience? Only want to do this once while the engine is out
  6. J

    Oil pan for dart motor???

    stock motor mounts
  7. J

    Oil pan for dart motor???

    What oil pan are you guys running with a dart block and a stock k member. My moroso wont fit and am wondering which is the best fit with no modifications. I dont want any fitment issues with the steering rack or k member. Want to bolt it on and drop the motor in my car.
  8. J

    How much HP can our stock AODE handle

    mine was behind 486 rwhp and not a problem yet.
  9. J

    Help me identify my weird rev squeal please???

    nope just changed it still does it!!!
  10. J

    Help me identify my weird rev squeal please???

    My car never did this until 2 weeks ago when installed my supercharger. Its not the supercharger it sounds like its coming from the top of the manifold in back/center or the bellhousing. It only does it after you rev it and it is reving down. I did however change valvcover and reset the preload...
  11. J

    AFM Powerpipe for vortech question?

    How did you guys cut the hole you need to make for the powerpipe? Also could you guys post some pics. Thanks a lot. -Jared
  12. J

    vacum hose sizes?

    What size vacum hoses are on our cars? I am going to replace all the vacum lines after I get off work and need to stop and by them on the way home from work.
  13. J

    HELP! no power after vortech installed

    Thanks for all the input guys. I am getting a tune on the 23rd of july from kennedy's speedshop. I forgot to mention that. I have lucas 38# injectors with a pro-m 80 calibrated for 38's. Just bought 42's and a new meter. See if thats the problem. Graddy- I know you are a tunning guru and an...
  14. J

    HELP! no power after vortech installed

    looking for 42# injectors / mass air meter to try and see if that was the problem.
  15. J

    HELP! no power after vortech installed

    I have the btm just didnt install it... 10 deg with spout out. I am thinking that maybe the maf I bought used is not good... The car has way less power now than before i even puit the blower in. I am goin to put the 30# injectors/mass air in today and see if it free revs ok and doesnt run rough...
  16. J

    HELP! no power after vortech installed

    I have 38# injectors with a pro-m80, 255 lph intank pump with an aeromotive fpr. I have stock tune running I do not need to use the inline pump i was told by kennedys dynotune and was told to throw that fmu in the garbage lol.
  17. J

    HELP! no power after vortech installed

    The car ran great before the vortech sq trim 6-8 psi kit was installed. I changed the injectors, and maf along witht he kit. I didnt use the fmu, or the msd boost redtard box, or the t-rex inline pump. eNow here is what happens the car starts and idles fine but start to run "rough" at about...
  18. J

    Need a Flow Sheet For Granatelli 75MM Mass Air

    TTT
  19. J

    Need a Flow Sheet For Granatelli 75MM Mass Air

    just like the title says..I have 30# injectors also.
  20. J

    Questions before valve covers go on

    that is normal because you have no oil pressure when the car is off. when it is running you build oil pressure and pump up the lifters.
Top Bottom
Back
Forums
Menu