Search results

  1. donjohn

    Anyone Need Plug Wires?

    hmm, when i got a new set this past weekend it had a short and long... i chucked the long, but i believe they had the same connection. I had to reuse the old clip that was on the coil and attatch it to the new plug end (is that what you mean?). or that it was just a totally different one oh...
  2. donjohn

    Brake Caliper Paint....Comments?

    it's pretty straight forward, check ur haynes manual or equivalent you don't need to replace anything
  3. donjohn

    do your c/c plates hit your hood??

    i read in a c/c thread a while back that somebody had to trim something... i'll see if i can locate the thread on your hotchkins plates, are there any spacers on the topside of the strut, i.e. if there are spacers used in the engine bay, those can be relocated to underneith.. that would drop...
  4. donjohn

    Engine bay finally finished (pic)

    That's some nice work you've got there :nice: I'd like to see some exterior pics if you have any?
  5. donjohn

    do your c/c plates hit your hood??

    i've heard of some of the studs being too long, but if you do the install right, you're supposed to check hood clearance with playdoh or something like it. he probably didn't but the bearings on the right side. read install instrucitons before you do it, even if they're not from the same CC...
  6. donjohn

    Seats

    i didn't know corbeau made an adapter i made mine, just removed it from the old seat, made an adapter out of a piece of steel, drilled a few holes and vuala. (adapter being a probably (don't remember) 2" wide 14" long piece with a few holes and some G8 bolts) Problems: might be too high...
  7. donjohn

    help! steering wheel shakes!

    hmm, now that you mention it, i'm not sure, i guess i was talking about the whole car shakin in general. good call
  8. donjohn

    Clock isn't working.

    if you want to check the clock out, get a test light and check which wire on the harness is the power (12V) and black is ground (usually always) so you could get a 12V DC adapter and try it in your house There may be a problem with doing this however, I'm not sure if the clock has a...
  9. donjohn

    Flickering Headlights

    I would first check your headlight fuse to see if it's burnt at all, this is the easiest thing to do before you bother with pulling the whole dash panel out or something. I don't think both the dash and headlights are on the same fuse, so that could be it. Next I would go with wiring behind the...
  10. donjohn

    Clock isn't working.

    the clock can be removed by pushing up and towards the windshield on the front top of it (if nobody already told you)
  11. donjohn

    Flickering Headlights

    I would first check your headlight fuse to see if it's burnt at all, this is the easiest thing to do before you bother with pulling the whole dash panel out or something. I don't think both the dash and headlights are on the same fuse, so that could be it. Next I would go with wiring behind the...
  12. donjohn

    Flickering Headlights

    the whole rheostat device might be going out or something. i've never personally heard of this problem. I would first check your headlight fuse to see if it's burnt at all, this is the easiest thing to do before you bother with pulling the whole dash panel out or something. I don't think...
  13. donjohn

    Flickering Headlights

    the whole rheostat device might be going out or something
  14. donjohn

    convertible roof replacement

    ok caldwell, i guess if somebody puts that on my ass... i mean sig, i wouldn't complain. chrismillion: there are a few problems I see wtih this installation. I would think that you should pull out the rear panels and see if you can see or get to the top assembly. After that you need to be...
  15. donjohn

    Tips to spring install

    why do you have to remove the brake? can't you just remove the caliper. I had my struts off and I think i just dropped (literally the first time) the a arm and the spring still didn't pop out. I had to use a screwdriver or crowbar or something edit: and i posted while you did. I...
  16. donjohn

    help! steering wheel shakes!

    good shop suggested that my struts were worn out, as well as numerous bushings. so i bought a arms, tie rods, shocks/struts and it shakes a TON less... but it still shakes. I think a new drive shaft would finish it off since a lot of shakes can be attributed to the u-joints
  17. donjohn

    convertible roof replacement

    he's talking about all of the harware too right? not just the material. am I correct in that statement?
  18. donjohn

    $800 Cobra Intake? WTF?

    does that really matter? seems to me like they would all give the same readings :shrug:
  19. donjohn

    installation of black cloth top **DUW**

    revisions... blasphemy :) i should have gotten the whole kit when i did mine. where'd u get it from?
  20. donjohn

    Anybody have TMJ? Mine is kill'n me today.

    i kinda get it i guess... but it's only after i chew gum for a long time ... i don't chew gum much anymore, good 'ol breathstrips
Top Bottom
Back
Forums
Menu