Search results

  1. 97gtconv.

    converting 1/8 to 1/4

    is there program or someone knows how to. my time was 10.038 at 72.35 with a 2.304 60'. i ended bending a exhaust valve halfway down the track. oh well P.I. conversion here i come.
  2. 97gtconv.

    Regrind Q's

    so should i just get vt stage 1 N/A with comp's springs or comp cams 262ah with springs? or no springs? wouldn't i get spring float? thanks
  3. 97gtconv.

    Regrind Q's

    thanks
  4. 97gtconv.

    Regrind Q's

    This is for the near future and I need some help. Could I get my P.I cams reground to what I want? I'm doing the P.I. swap and I figure i'd check out to see if i could save some money by getting them reground. The P.I. cams are from anderson motorsports. they only have 2,000 miles on them. the...
  5. 97gtconv.

    Just did Seafoam, have a question

    it's doesn't say anything on the can but i would. just in case it would clog up my oil filter. i wouldn't the crap that was broken down going through my engine.
  6. 97gtconv.

    Just did Seafoam, have a question

    yes, i took off my pcv and used that line. as soon as you remove the pcv valve from the line the engine will run rough and almost stall. the line has alot of vacuum which i poured a half the can into it. i reved my engine while doing this so it wouldn't stall. by the time i had half a can in it...
  7. 97gtconv.

    Just did Seafoam, have a question

    i just did it on my 97gt. defianately noticed a difference. well worth the $6
  8. 97gtconv.

    Q's brown injectors?

    what numbers are the brown injectors? he's swapping the carbureator out on his 88 LX 5.0 and converting it to fuel injection. there brown injectors and i don't know what there rating is so i'm here asking the people who do. thanks Jason
  9. 97gtconv.

    Coolant Problems

    when he drives the car it fluxuates but barely goes passed the halfway mark on the temp gauge. when he shuts the car off that's when it starts to overheat and coolant comes out of the resevoir tank. jason
  10. 97gtconv.

    Coolant Problems

    i think it's a blockpassage as well. if it is what could he do about it? thanks, i got some more info, it seems to be almost misfiring but it isn't detonating. it has like almost kinda a gurgle missfire. he has power loss. the car runs better without the thermostat. when he drives it somewhere...
  11. 97gtconv.

    Coolant Problems

    I'm asking this for my roomate's friend. He has a 95 v-6 mustang. the problem is his car is overheating and coolant is forcing out of the top of the resevoir. he thought it was the thermostat and when he unbolted it to replace it there wasn't one there. so he put a factory thermostat in and the...
  12. 97gtconv.

    what valve covers?

    I'm trying to figure out what i'm going to do with a 00 gt motor (windsor) that will not work with my pcv system. i have pictures of the engine Minus the valve covers. I don't know how to make the pictures smaller so i can post them.
  13. 97gtconv.

    what valve covers?

    the heads I believe has a 11 bolt pattern. I have pics of them but i don't know how to make them smaller.
  14. 97gtconv.

    what valve covers?

    i'm thinking of getting a 00 gt motor which happens to be a windsor motor, well the valve covers aren't going to work because of the pcv system and oil filler. what valve covers would work for my 97gt. thanks
  15. 97gtconv.

    Cracked intake manifold

    If I'm not mistaken it was pretty soon after they were released to the public. i bought my stang in 02 and i busted mine and not knowing that it had a recall (i had a extended warranty) they replaced it for free (like $1200.00 was the totoal) and put a aluminum one on instead of the crappy...
  16. 97gtconv.

    All those with long tubes get in here!

    i scrape like once a week living in houston. I got mac long tubes with mac h-pipe and mac catback. I got eibach pro springs 1 1/2". i rarely scrape the long tubes but the h-pipe is dented up.
  17. 97gtconv.

    Cracked intake manifold

    behind the alternator, it's a silverish squarish tube that's metal, if it's not metal than it's a stock 96-98 intake manifold that didn't go in for it's recall by ford
  18. 97gtconv.

    Engine and tranny swap info NEEDED

    I'm thinking about converting to a manual. it's a 01 gt motor and a TR 3650 tranny. i already know i have to get a wiring harness and computer. Do i need to get a different driveshaft? What else would i need? thanks
  19. 97gtconv.

    01 GT auto tranny in a 97 GT?

    bump
  20. 97gtconv.

    01 GT auto tranny in a 97 GT?

    I found a pretty good deal for a 01 gt motor with automatic trans. my car is 97 gt auto. is it the same? or would i have to change computers? or are they just different? thanks
Top Bottom
Back
Forums
Menu