Search results

  1. Liv2roc

    Oil Question

    I use valvoline racing 20/50
  2. Liv2roc

    carb vacuum and pcv?

    the 3/8 npt goes to the vacuum tee on the firewall then the brake booster goes to the tee. but if you have no other accessories for vacuum then you can run the brakes straight to the 3/8 npt. distributor vacuum goes to the small carb nipple with no vacuum at idle.
  3. Liv2roc

    Exhaust install

    new pipes will normaly have oil on them and will smoke a little and have a burning smell till it burns off.
  4. Liv2roc

    Installing a cam "Straight up"

    loctite the cam bolt or it will work loose
  5. Liv2roc

    Rebuild, what cam?

    Im Running a comp cam 31-432-8 here is what it sounds like YouTube - 84 mustang gt 350
  6. Liv2roc

    oil pressure problems

    are you spinning the oil pump with a drill counter clockwise??
  7. Liv2roc

    Camshaft Question

    intake , valve covers and lifters come out too. roller cam only requires motor oil for lube. or just put in a stall converter
  8. Liv2roc

    Sigh...Do i need this and what does it do?

    the only thing I can think of is the cam thrust plate
  9. Liv2roc

    Wire/ Vacum Hose experts inside please

    try this
  10. Liv2roc

    How to rewire for 140 speedo ?

    did not know there was wire on the speedo
  11. Liv2roc

    just got my mustang back running

    its got a 92 block bored .030 over stock 84 heads with a comp cam 31-432-8 with 281 duration and .512 lift this is the first engine I ever put together by my self watch the video YouTube - 84 mustang gt 350
  12. Liv2roc

    Wire/ Vacum Hose experts inside please

    its on the air duct and the defrost is the one that blows on the windshield
  13. Liv2roc

    Wire/ Vacum Hose experts inside please

    the yellow goes to the defrost flap motor and look at picture for cables
  14. Liv2roc

    Name that cam!!

    I got three in my garage one cost me a motor when it wiped two lobes off and took out the oil pump
  15. Liv2roc

    car just shuts off

    I have a 84 gt 5.0 carb with duraspark distribitor. problem is I start it up and sometimes it dies and when I try to restart it , it starts and cut straight back off over and over again like 30 times then it will start and run fine. its getting gas I think I can see the acceleratator pump shoot...
  16. Liv2roc

    Head gaskets/bolts

    the drivers side of gasket goes pretty side up and passenger side goes pretty side down. this is the way I remember. oil threads and head of bolts that contacts the head
  17. Liv2roc

    Smog pump hole help

    if you leave it with a belt on it ,it will be real noisy running pumping air without a hose .so what I do is gut it . very easy to do. take the back plate off and get a hammer and a chisel and knock everything in it out , but be careful not to damage the bearings. and if you dont get every...
  18. Liv2roc

    Lee Iacocca Crafts his own "45th" Ford Mustang

    another mustang that ford will make that the average person cant afford and the dealers will add $30,000 mark up to.
  19. Liv2roc

    changing form 84 duraspark distributor

    I had a 84 non roller engine with duraspark distributor and now I have a roller short block installed I need a steel distributor gear so I have a later model distributor form a roller engine with module made on to distributor. gears will not interchange shaft size is different .how do I wire...
View older results
Top Bottom
Back
Forums
Menu