Search results

  1. R

    1995 mustang gt 5.0L

    Make sure it's an OBD1 scanner! That obd2 port under your steering wheel will not work!
  2. R

    Engine Explorer 5.0 Swap Into 94/95 Gt Or Cobra

    Will that cam work with the small valve spring the gt40p has? I bought some gt40p for 70 dollars (i pulled them from the yards) every place ive read says that my stock cam is too much for the stock valve springs found on the gt40ps.
  3. R

    Broke The Tube To Egr, What To Do.

    I'll check around at the muffler shops to see what the damage to my wallet will be. I live in Utah, Salt Lake area, so emmisions is needed. I havent driven the car in 2 years ever since after the transmission swap, i've been firing her up every 4 months, to keep the oil pump primed.
  4. R

    Broke The Tube To Egr, What To Do.

    So I was removing my upper part of my intake manifold to put in a brass fitting http://s155.photobucket.com/user/car_sand/media/Mobile Uploads/20160802_133014_zpsfond0cdp.jpg.html?sort=3&o=2 something I should of done years ago when I installed the manifold? Well, tried to remove the egr...
  5. R

    Best way to flush coolant

    ive also flushed mine with some "gunk off" untill the water is clear, to fill the system back up, I used distilled water with antifreeze.
  6. R

    Tried A Cheap Cold Air System

    I made my own CAI and it works and runs fine, heres another vote for MAF not connected.
  7. R

    Drivetrain Aod(e) Transmission-should I Do Myself?

    Ahh yes the Aod-e, got rid of mine. Changing out the trans shouldn't be too hard , 4 jack stands, transmission jack (or regular jack with few modifications), and maybe 2 25LBS weight lifting plates to place under the front jacks in case you can't clear the transmission. I would only worry...
  8. R

    Trans Swap Complete, Driven And Know I Got A Few Questions

    Not really sure what type of bearing the mx3, civic, stealth use. I can't get it to engage into 1st softly without jerkin of the car, no matter how lightly I step on the gas, or how much more I give it the next time. going into other gears is cake.
  9. R

    Trans Swap Complete, Driven And Know I Got A Few Questions

    Completed the swap about a week ago, this is my first manual car that I've driven and can now drive the car pretty smoothly, but my brother did notice that the clutch pedal is stiff as heck, I got behind the wheel of his civic and mx3 and clutch pedals on those are a lot softer than mines. Is...
  10. R

    Drivetrain Flexplate bolts work with a t5 flywheel?

    I received my flywheel bolts from summitt the other day, and just compared the stock flexplate bolts to the ARP-100-2801 bolts, they both measure the same lenght 1 inch from where the threads start! Here's the difference I am seeing though. Using the flexplate, the bolts stick out 7/8 of an...
  11. R

    Drivetrain Flexplate bolts work with a t5 flywheel?

    Im going to pull the Aod-e out today, Just wodering if I can use my old flexplate bolts on the flywheel for the t5 swap, I can't seem to find the answer looking through some of the old posts. And this time around I was able to find the correct pedals and T4M0 computer. Thanks guys.
  12. R

    Driveshaft yoke which one?

    SN-95 GT's came with a T-5 World Class ending with a tag number of 246 and 242 for the Cobra's. Is the slip yoke from an automatic (rounded weight in the middle) smaller in lenght to that of an original manual slip yoke?
  13. R

    Driveshaft yoke which one?

    Im looking to complete the part's list for a t-5 swap, I leaning forward to gettting an autozone fly wheel ($50), last but not least the yoke that connects to the driveshaft, what years and models are standard on the t-5's for our sn-95's?
  14. R

    Expired Parting Out Built 95gt

    Do you still have the driveshaft yoke (yoke) definatlly interested.
  15. R

    Manual Transmission Harness. W/pics

    Ok, new details and questions on my swap. Im going for the 94 95 t5 swap, I now have the T4M0 Ecu, the correct transmission harness, clutch cable used, Correct pedals, and the 5.0 Bell housing should be coming in the mail with the dust shield, clutch fork and clutch fork cover and bolts. post...
  16. R

    Manual Transmission Harness. W/pics

    Is there a list of what is compatible with a 94-95 5 litter T5's? I found a guy selling his for $200 dollars (94-95 5.0 litter spec T5) but im wondering if a different bellhouse will work if I install the transmission while leaving the longer input shaft in?
  17. R

    Manual Transmission Harness. W/pics

    Well, what about the pedal assembly ? will that work on my 95 GT? the pedal assembly is also from the 96 mustang GT I pulled the ecu, and tranny harness from.
  18. R

    Manual Transmission Harness. W/pics

    I found those posts (using aode harness rewiring, etc) a couple days ago. What also troubles me is that besides having the Mustang gt imprint on the back bumper (the car I pulled the harness out of), and also having an original cut on the shifter opening (it was neatlly cut, with all for bolt...
  19. R

    Manual Transmission Harness. W/pics

    Well my Aod-e is taking a nose dive for the worst. Searching through the yards I found a 94 GT manual ECU, Pedal assembly, trans harness. My question? is if this harness is usable? My confussion, is when I compare to the ebay pics, I haven't stripped all of the black plastic shield off. But...
  20. R

    t5 bellhousing spacer

    New to the t5 tranmission scene, say I have a fox transmission with a 94-95 bellhousing, I would need to get a shorter input shaft? say I had a 94-95 transmission, with a fox bellhousing, I would need to get a longer input shaft
Top Bottom
Back
Forums
Menu