Search results

  1. JohnnyK81

    Drivetrain Possible To See Pressure Plate #pn Through Bellhousing?

    I need to figure out which clutch/pressure plate I have on my 5.0/T5 combo (that is in a vintage car) to eliminate some causes of a very stiff pedal. I want to know if it's the HD clutch.. I seem to remember a FRPP part number. Is there any way to view it? It seems that FRPP stamps the...
  2. JohnnyK81

    Engine Gates 43272 And 43272p Water Pump? Correct?

    Was going to snag a water pump as mine is old and rusting.. Was on Rockauto and saw two gates ones, (the P being the aluminum one. Not sure if it is higher flow). Funny thing is, it is listed as " Standard rotation". But it is also listed for 86-93 5.0 Mustangs (And cougars, etc, etc). I was...
  3. JohnnyK81

    Electrical Should I Remove My Msd Blaster 3 Coil And Install A Stock Coil?

    Thanks guys. So we know there is a reliability problem with the Blaster 3 in EFI cars.. or this is just MSD prejudice?
  4. JohnnyK81

    Electrical Should I Remove My Msd Blaster 3 Coil And Install A Stock Coil?

    Well the coil appears to be working just fine. I'm not buying another coil, in case that's what it sounded like. Let me rephrase. Any advantage to stock coil, over the carb-style tower MSD Blaster 3 coil? :P
  5. JohnnyK81

    Electrical Should I Remove My Msd Blaster 3 Coil And Install A Stock Coil?

    Thanks guys! I have no qualms with MSD itself, and srtthis, I assume they aren't running the Blaster 3 coil, but the one meant for efi. So I'm wondering if this Blaster 3 coil, which I THINK is meant for carb, is ok to run on my engine.. However, I also do not think there is anything specific...
  6. JohnnyK81

    Electrical Should I Remove My Msd Blaster 3 Coil And Install A Stock Coil?

    So when I was swapping this 1989ish 5.0 into my 1967, I didn't think I had a stock coil anywhere.. But I DID have an MSD Blaster 3 ignition coil.. Which used spade connectors.. So I chopped the lead (or the harness didn't have a lead, I can't remember!) and installed spade connectors. Fast...
  7. JohnnyK81

    Maf Conversion Confusion, Please Help

    If I may offer an opinion.. Instead of doing the mass air conversion, why not spend that money on a tuneable chip instead? I mean, I still can't use mine worth a crap, but I'm glad I bought it as now I can see what it's doing (once again, have no idea what I'm looking at, but the ABILITY is...
  8. JohnnyK81

    Digital Tuning Some Very Basic Moates Quarterhorse, Tunerpro, Eec Analyzer Questions

    Hey guys, so as I wrote last week, just bought this, and going to plug it in tomorrow, but since eectuning.org is down, I'm really at a loss as to what to do! So a couple questions. The first, and MOST basic question.. haha.. I remember reading either to NOT plug the laptop into the QH when the...
  9. JohnnyK81

    Electrical Good Forum/site For Tuning Help/files (bins, Etc)?

    Thanks guys. reading through EFIdyno as that seems to be the only forum!
  10. JohnnyK81

    Electrical Good Forum/site For Tuning Help/files (bins, Etc)?

    Picked up a QH and was planning on using Tunerpro. I noticed GM guys have code59 or some such website, with stock bins, modified bins, etc! Do we have anything like that? I mean, ideally, I'd like to start with a bin that someone created that's close to mine to kind of get my feet wet...
  11. JohnnyK81

    Autometer Gauge Led?

    I grabbed a bunch from 2 different suppliers off ebay (both Chinese).. One was terrible, the second one was great though. The blue is almost too blue though!
  12. JohnnyK81

    Autometer Gauge Led?

    Should just pull out?? I can't imagine a non replaceable bulb where you have to solder a wire each time a bulb burns!! I'm sure they just pull out.
  13. JohnnyK81

    Autometer Gauge Led?

    I must not be understanding. I have ultra-lite 2 5/8 and i just bought 168 (or whatever size) LED's with those bases on them.
  14. JohnnyK81

    Engine Gasket For Stock Upper Intake Without Egr Hole In Center?

    Ehh I'll grab one later this week. Problem is on a 67, the shock towers cause clearance problems, so with the EGR spacer, the intake tube will run right into it with no room to bend towards the front of the car.
  15. JohnnyK81

    Engine Gasket For Stock Upper Intake Without Egr Hole In Center?

    Thanks guys, I'll find something to fit I suppose! (See previous thread.. EGR no fitty).
  16. JohnnyK81

    Engine Gasket For Stock Upper Intake Without Egr Hole In Center?

    Thanks guys. Crap.. I thought for sure there would be one. I guess I could tap and plug.. Probably easier just to turn down a piece of aluminum and tap it in though.
  17. JohnnyK81

    Engine Gasket For Stock Upper Intake Without Egr Hole In Center?

    Hey guys, does anyone know if there is a gasket that will work on the stock upper intake (to lower intake) that does NOT have the center hole punchout for the egr? THanks!
  18. JohnnyK81

    Electrical Code 91. Replaced O2's. Now Code 41. Runs Rich.

    Ahh, you're probably right.. No, not trying to gain HP.. ;) Wouldn't think it would. It would be ideal if I could keep it, but as I said, on a 67, the intake tube runs straight into the RH shock tower, unfortunately. No, probably not the source of my problem, but could be the source of my...
  19. JohnnyK81

    Electrical Code 91. Replaced O2's. Now Code 41. Runs Rich.

    THanks man! Definitely not pulling heads/lower intake, so I'll just plug the middle hole. Was hoping to drill and tap, but I suppose doesn't matter what i use! BUt how haven't I deleted it? EGR spacer is removed and replaced with a plate so the throttle can bolt up. I HAD to be deleted, so I...
  20. JohnnyK81

    Electrical Code 91. Replaced O2's. Now Code 41. Runs Rich.

    No cats (67).. Fuel economy is TERRIBLE.. Stink of gas... In fat, I smell like fuel and exhaust after driving it. haha Let's say, 12mpg ballpark off the top of my head. So your suggestion is, unplug EGR resistors.. Let the CEL come on for code 33, drive it for a bit and see how it is now? So...
Top Bottom
Back
Forums
Menu