Search results

  1. B

    Need seperator plate hole diagram

    Also, is a new seperator plate gasket mandatory for the J-mod? I called all the auto parts stores in town and they didnt have one.
  2. B

    Need seperator plate hole diagram

    I was going to drill holes in my seperator plate today (for j-mod) but the TCCOA site wont show me any pictures. If anybody has something that shows which holes on the seperator plate I need to drill, it would be great if they could send them to me.
  3. B

    Shift points moved after Torque converter?

    Yeah, I'll call them tomarrow and see what they have to say!
  4. B

    Shift points moved after Torque converter?

    Yeah, I think the lowest I've put my shifts point was 5100. 5700 I think was the factory setting. I'll try 4900 tomarrow. With my valve body came 1-2 and 2-3 accumulator springs that actually made them stiffer to push up on. With the J-mod you take out springs, correct? So, should I put the...
  5. B

    Shift points moved after Torque converter?

    If I lowered the rev limiter, wouldn't I just hit it sooner (instead of shifting)?
  6. B

    Shift points moved after Torque converter?

    Yeah I have similar problems , not exactly the same though. So do you know what is causing it?
  7. B

    Shift points moved after Torque converter?

    I put in a PA valve body and got the programmer. At WOT the car wont shift at the RPM I set the programmer at, it will hit the rev limiter. If I set it at 5200RPM, still hits rev limiter. Also the PA VAlve body came with different 1-2 and 2-3 accumulator springs, With the Jmod dont you remove...
  8. B

    PA valve body installed, serious problems...

    I can only work on my car during the weekends, fulltime job and fulltime school. :notnice: Its gonna work this weekend though, I can feel it :flag:
  9. B

    PA valve body installed, serious problems...

    The Pressure control solenoid code is still showing up along with the blinking O/D light. Took it for a drive, HELLA late shifts :bs: Even after changing WOT shift points w/predator
  10. B

    PA valve body installed, serious problems...

    The thing I found was what you said about the first notch on the manual valve. Thanks alot by the way :nice: Also, I read a post by you about using the b&M on a 2001-2004 mustang ( want one for 2001) On either corral.net or modular depot there was a post about that shifter, you shoould be...
  11. B

    PA valve body installed, serious problems...

    I found one of the problems, and solved it. But............. The O/D light still flashes, when I took it for a drive it wouldnt shift into OD. The predator have a code: Pressure control solenoid A open circuit can i drive my car until I get this figured out?
  12. B

    PA valve body installed, serious problems...

    I didnt touch the linkage on the drivers side of the tranny. So I assume there must be some other shift control. I'm going to check out that manual valve thing a nd see if its in the right place.
  13. B

    PA valve body installed, serious problems...

    Thanks for the replies! I think I'll go try again in a few minutes. Can I drain the pan and have someone go through the gears while I watch? without the car running of course.
  14. B

    PA valve body installed, serious problems...

    Yeah..... :nonono: My o/d light comes on about 15 seconds after i start it, and when I shift through the gears, its not going into the right gear. Sometimes if I put it in reverse it wont move, but sometimes it will roll forward slowly? For the love of god please help me!!!!!!!!!!! I'll...
  15. B

    Filter fell out when I took out valve body, Need to know where it goes!!!!

    The question is the headline! Its about to get dark and I'm doing this in a parking lot!!!! nedd help ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!
  16. B

    Need valve body help!!!

    I did already look at the tccoa tech articles and they didnt help.
  17. B

    Ford front liscense plate legal in Wisconsin?

    Maybe I'll just put one on until the cops start pulling me over for it.
  18. B

    Need valve body help!!!

    I got my PA street strip VB and I would like to put it in today. My problem: It came with four springs and crappy directions for installing them on the 1-2 and 2-3 "accumulator pistons". Could some one please explain where the hell the pistons are? :shrug: are they in the VB they sent or in...
  19. B

    Ford front liscense plate legal in Wisconsin?

    The title says it all. Dont like the way the WI plate looks on my car and wanted somethin else. Dont want to get pulled over though. :notnice: thanks
  20. B

    Shifter For 01 Gt Auto?

    I would also likr to know if it works on a 2001 gt
Top Bottom
Back
Forums
Menu