Search results

  1. blacksheep-1

    rice or nice

    A little razor blade work on the vinyl stickers would straighten it right out. :nice:
  2. blacksheep-1

    Looks like Hogan smacked up the Supra...

    His passenger is FUBAR'd with a head injury, both had to be cut out of the car. Poor dumbass no talent rich puke gets away with everything, it's too bad that some of that money didn't go to a kid that has some talent, there's plenty out there that are bustin' their butts to go racing while...
  3. blacksheep-1

    RICE OF THE WEEK

    http://www.ricecop.com/
  4. blacksheep-1

    Traction control light always on

    try these guys, e-mail is probably the best way as they are moving to a new shop. www.racerelated.com
  5. blacksheep-1

    What can you tell me about Atlanta GA

    They have photo radar Everyone drives 85 in the 55 zone on I-80 It's close to Road Atlanta It's 1.5 hours to the smoky mountains The trip from Atlanta to Valdosta Ga. is 8 million 700 thousand miles (at least it seems like it) If you were to compare Georgia's trade with all of the nations...
  6. blacksheep-1

    Perhaps help with GM ignition???

    Yep 40 degrees seems the magic number fro a chevy, the reason (imo) that the HEI has issues over 5-6grand is the coil, an aftermarket coil willususally fix this. The HEI is a great, no brainer distributor, that's why they make them that now fit fords and mopars. Going back to points is a step...
  7. blacksheep-1

    kenne bell or whipple kit?

    take my advice, find a local tuner and buy the KB "tuner kit" this will give you the hard parts, then get the injectors and tune from a local shop (prefferably one with a dyno), like these guys: http://www.racerelated.com/ because although I love my KB, dealing with their customer support is...
  8. blacksheep-1

    Help me please....

    You could just pull of the cover and count teeth, or look at the serial number, many end (or have written into the gear somewhere) the gear ratios or number of teeth. That way you'll know for sure, all it will cost you is some posi gear lube and a tube of silicone. BTW here's another calc so...
  9. blacksheep-1

    Converting to 10.5 inch clutch on 2004 GT?

    I'm a low buck guy, I went with the Cobra clutch and while you're there, pony up for an aluminum flywheel. It's not like you tear into it every day, and it's a good mod. IMO money well spent.
  10. blacksheep-1

    Eibach Suspension

    1.5 front and rear, no bottoming out. I'm thinking that 2inch would probably hit. click on pic as discussed in other threads, invest in the bump steer kit and the steering kit to make this work. http://www.steeda.com/products/bumpsteer_kit.php...
  11. blacksheep-1

    wheel spacers

    I've beat on eibachs for years w/o problems, all of the folks mentioned seem to make quality pieces. no tucked in look, no broken spacers.
  12. blacksheep-1

    how do i correct my suspension geometry?

    I would say benny is on the money, it has been my experience that once you lower the car, the roll center is now down under the pavement somewhere, the bumpsteer kit will fix that (along with the ball joints)and you may find that it will make a major handling improvement by doing so. I too...
  13. blacksheep-1

    superchargers and gas mileage

    Let me explain my post I never checked the in town mileage, I had checked the highway mileage. I should've mentioned that.
  14. blacksheep-1

    Window Motor crapped out

    Place the window in the up position, wrap some cardboard around it and hold it in place at the top of the door with a pair of vise grips or clamps (don't get stupid with the force needed to hold the window up). That's 99% of the problem, now remove the door panel, etc, you may have to drill out...
  15. blacksheep-1

    superchargers and gas mileage

    I drive mine around town, I never checked the mileage until after I installed the KB, it got 18-19 mpg. What shocked me is that when I drive it from Fla up to the Smokey mountians it gets 22-23mpg, normally aspirated, it was only good for 20mpg out on the road. What I suspect is that in most...
  16. blacksheep-1

    few new KB 2.6 pics

    What kind of intercooler are you running? I really don't see the water lines coming out of the back of the manifold, or maybe I just missed them, I need to intercool mine and ahven't yet.
  17. blacksheep-1

    2.3 road racers in here.

    Locally I would run in modified street tire, since ALL the race tire classes have been lumped into 1 pile. So. 93 cobra w/17 inch wheels would work (offset OK?) and I need to find some tires with a treadware of over 140, like 141 or something, or maybe 139.75. and some tire softener:nonono:
  18. blacksheep-1

    2.3 road racers in here.

    We were running NASA, which penalizes you for mods, once you get to a certain amount of points you go up to the next class. As an example I finished 3rd last year in class "D", Even with penalty points I was able to run DOT race rubber, but.... then I had to pick lowering springs, or trick...
  19. blacksheep-1

    Where get NHRA approved conv. roll cage

    Where are you located? IMHO you should spring the extra $$ for the chromoly tubing, it has to be welded with a TIG, but it's a lot lighter.
  20. blacksheep-1

    2.3 road racers in here.

    Mr. Manny, is that enough tire? These little tiny slot car tracks that we run on require the wheel to be turned about 90% of the time, there's virtually no straights, and if there is you use it to set up for the next corner, we also have single cone turns, which means you have to do a 180 in as...
View older results
Top Bottom
Back
Forums
Menu