Search results

  1. Scott W

    Can I run catted h-pipe with performer rpm heads?

    For some reason the diagram in your post didn't come up the first time I looked at your reply, I just saw it though. So I see where the diverter valve is located, but again where do I run the rubber hose to? Or do I just cap the other end of the hose?
  2. Scott W

    Can I run catted h-pipe with performer rpm heads?

    Thanks for all the info - great information. I was hoping to keep the cats to make the car run a little cleaner. Forgive me, but is the diverter valve you speak of coming off the smog pump itself? Where would I run the rubber hose to?
  3. Scott W

    Can I run catted h-pipe with performer rpm heads?

    I know the performer rpm heads do not have provisions for emissions, but I wanted to know if I can still run the cats in the h-pipe or do I need to pick up an offroad h-pipe without cats. thanks in advance
  4. Scott W

    LDC Freeplay kit - adjustment req'd after install?

    I just installed the fiore firewall adjuster and quadrant, bit of a pain to install - actually getting the old quadrant out was the biggest pain. Anyways - I have everything tuned great right now - but i am just about to install the Freeplay kit and I was wondering if I will need to re-tune the...
  5. Scott W

    does your oil light come on when key turned?

    thanks ID89GT, my light does come on when I crank the engine, so I guess it's working - I guess my oil level wasn't quite low enough to trigger the light - thanks again
  6. Scott W

    does your oil light come on when key turned?

    I replaced my dash a couple months ago, and recently I noticed I was running really low on oil and my check oil light didn't come on. I'm wondering if I might have jarred the bulb loose on the back of the dash panel. When you turn the key in the ignition, does the check oil light come on...
  7. Scott W

    To Buy a Crate, or Not To Buy a Crate?

    I'm also looking at the M-6007-X302. Its a pretty good deal - 12 month warranty and my stock engine has over 300,000 km on it and still going strong. The ford assembly line seems to do a pretty decent job with assembly. I live in Canada, and having the old block machined, new heads, cam...
  8. Scott W

    Anyone with Eibach front swaybar?

    thanks for the pics wystang. I appreciate it. I did in fact get the wrong bar. I had to put my original back on.
  9. Scott W

    Glove box light - why 3 wires?

    thanks guys. I was able to split the black wire and run one end to the black wires on the aftermarket gauges, and the other end to the red wires. Now the guage lights come on with the glove box light.
  10. Scott W

    Glove box light - why 3 wires?

    any idea of how to 'tap' into these wires. If I clip one of the yellow wires, install the red wire from the aftermarket gauge to one end of the clipped wire, and run the black wire from the gauge to the other the gauge lights would be run in series and shouldn't operate until the glove box...
  11. Scott W

    Glove box light - why 3 wires?

    I am installing gauges in my glove box and was hoping to have the new gauge lights come on when I opened the glove box (with the glove box light). There are 3 wires going to the glove box light/switch. 2 yellow and 1 black. Does anyone know how this switch works? why is there 2 yellow. I am...
  12. Scott W

    Will sn95 front swaybar fit on fox?

    thanks guys. although is physically fits (I have it on now), the bar is not the same. I will have to remove and replace the bar with the proper one.
  13. Scott W

    Will sn95 front swaybar fit on fox?

    I was sent the wrong swaybar, its meant for 94 and up. I have an 89. Does anyone know what the difference is?
  14. Scott W

    Anyone with Eibach front swaybar?

    thanks guys. whystang, the problem i'm having is both pictures are identical, they are the same picture (if you look at the picture properties they are both pics of the 3510.320. The 94-04 kit is actually part number 3518.320, but I cannot find a picture of that particular bar. I have what...
  15. Scott W

    Eibach anti roll kit

    I want to make sure I got the correct front swaybar. I ordered Eibach 3510, but the box and bar both say 3518. The bar fits on no problem. does anyone know if the 94 and up swaybar look similar, or are they completly different? I have a couple photos posted...
  16. Scott W

    Anyone with Eibach front swaybar?

    I ordered an anti-roll kit for my 1989 and i think I got the wrong one. If someone has one installed on a 1994 and up please look at the following pictures and tell me if you have the same bar. thanks
  17. Scott W

    Setting Ride Height - need measurement

    Thanks for the reply and info. I have an 89 LX. I have suspension technique lowering springs and i"m going to replace the front with the coilover kit. I want handling and looks. right now the car is leaning to the back, I want to lower the front at least as much as the rear, so that it rides...
  18. Scott W

    Setting Ride Height - need measurement

    I need to know the measurement from ground to fender lip. I have quite a bit of stereo equip in the trunk, so as a result the back end sits a little bit lower than the front. I just picked up a front coilover kit and I want to know how low I can go in the front. My rear measurement is 25.5"...
  19. Scott W

    Emissions Test Results - no cats vs MAC

    I thought I would post this for anyone in the future. For several years I have failed my emissions test, and used to get by with a conditional pass. this year I pickup up a used MAC hi-flow H-pipe with cats for ebay for just over $100. It made a huge difference in the results and my car...
  20. Scott W

    HPM Panhard kit - any users?

    I have alot of movement in my rear end. I have the mac upper and lower control arms installed and I'm looking for a panhard bar to control side to side movement. Has anyone tried the HPM panhard kit? Will it work with aftermarket control arms? any input would be much appreciated.
Top Bottom
Back
Forums
Menu