Search results

  1. axeman

    How much power to expect from Pro-M 75mm Bullit?

    can I expect 10HP and maybe drop a tenth in the quarter? I just ordered on and should have it soon. Then I'll get to the track and see what happens. Of course, it'll have to be after I replace this stupid water pump that started leaking on me.
  2. axeman

    Went to track tonight,,need your help

    have you ever checked any of the spark plugs to see what color they are? i think the last thing you want to do is add more fuel on a hot day, unless it's running lean to begin with. i've found it's best to add fuel when the temp is colder, and take some out when it's hot. did your mph change...
  3. axeman

    Went to track tonight,,need your help

    may have to try different shift points. so, what was your 60's this time?
  4. axeman

    need estimate on how much to cut off coil springs!

    i am wanting to adjust my suspension. i've been doing alot of reading on Baseline Suspension. i calculated that if i lowered the rear 1" and the front 2"s, my car should launch alot better. you think it would change the spring pressure rates to much by cutting them? my brother cut his in his...
  5. axeman

    need estimate on how much to cut off coil springs!

    anyone have an estimate for how much to cut off the coil springs to lower the car? i want to lower the rear 1" and the front 2". my car weighs ~3085lbs
  6. axeman

    4.10's with a manual

    do you run the 1/4 mile? i only see an 1/8 mile time there. 4.10's/26" slick is a great combo for the 1/4. don't know what you run in the quarter but, looks like 105mph is ~5500, and 108mph is ~5700. just thought i would run some numbers for you.
  7. axeman

    anyone adjust there suspension per Baseline Suspension?

    i've been doing alot of reading about adjusting my suspension to get the recommended Instant Center, Percentage of Rise, Anti Squat, etc. i'm wondering if anyone here has adjusted there stock suspension following Baseline Suspension's guidelines. According to all my calculations my Instant...
  8. axeman

    rear end questions

    oh, i didn't even think about that. do you mean the whole rearend including the housing, brakes, everything? or just the differential?
  9. axeman

    rear end questions

    i don't know. :D as long as it's an 8.8" rear it will fit. i'm not sure if there is a difference or not though. the splines may be different, and if that's the case you'll need different axles. do a little research on google or something to find out the specs. i have an 31 spline unit...
  10. axeman

    28 to 31 spline differential

    i believe all 4 of the spider gears are beefier in the 31 spline unit. that's part of what makes it a stronger differential. i don't think you can change just the side gears, you'd have to change the other two. i'm pretty sure, but i could be wrong about that. but then, like 1Quik85GT said...
  11. axeman

    Carbon Fiber Hood

    i don't believe all carbon fiber stuff is checkered, is it? might be all black or something. i believe it all depends on what resin they use. :shrug:
  12. axeman

    Tensioner question

    on my car i deleted the power steering, AC, and smog to run a really short belt. i ended up needing to modify the tensionser so it pulled the opposite direction. there is a way to do that. you take the tensioner apart by taking the black cover peice off. the spring inside fits in a little...
  13. axeman

    Tensioner question

    actually, the piece that it mounts to on the motor is threaded to accept a regular bolts that runs through that tensioner. i'm not sure why thopening on the back is shaped like that. that little nipple slips into a hole and secures the tensioner from spinning after it's bolted down. hope i...
  14. axeman

    moser c-clip axels with c-clip eliminaters??

    ok, i didn't realize they were the same except for the c-clip channel. i guess that makes sense now. i just wasn't sure. that's makes it a little easier then.
  15. axeman

    moser c-clip axels with c-clip eliminaters??

    i know they are reccommended for drag racing. are they still possible maybe with somemodification to the axles?
  16. axeman

    moser c-clip axels with c-clip eliminaters??

    sorry, i can't answer this question. i would like to know for myself though, so i'll bump you to the top of the page.
  17. axeman

    Battery or Alternator...im new at this

    usually your car wouldn't start right back up if the alt was bad :shrug:
  18. axeman

    new track times

    wow, nice times and mph for a relatively simple combo! ssooooo close to 11's. like me, i'm sssssooooooo close to the 12's.
  19. axeman

    What Octane Does Manual for 5.0 Call For?

    i run 87. i have since last summer when the gas prices went up a little. if you go to the track, you may even notice a little bump in performance since you are running 93 without advancing your timing. i checked my gas milage the other day, even though it was almost all highway miles, i got...
  20. axeman

    oil dipstick re-install question

    it doesn't have to be in there any certain way. if it's out, find the hole and shove it in. find somewhere that the tube mount fits best and bolt it on. you can bend it a little, but be very careful. maybe you'll have to do a little fabbing. :shrug: no problems with my LT's. :D
Top Bottom
Back
Forums
Menu