Search results

  1. 98bluevert

    Steeda Pulley - Bolt Size needed to remove?

    +1 Go to the zone rent there puller and it comes with nine bolts. 3 sets of 3 bolts. One set will work for ya. really easy to do just make sure you put some rtv on the keyway when you reinstall the pulley.
  2. 98bluevert

    What size hole???

    thanks for the help i'm using a 9/16 bit and i ordered a 3/8"-18 npt tap.
  3. 98bluevert

    What size hole???

    will the local hardware store have a npt tap or where can i get one
  4. 98bluevert

    What size hole???

    ok got that but what size drill bit 9/16 or 21/32 have been told both
  5. 98bluevert

    What size hole???

    ok so i have done some searches and have come up with using a 9/16 bit or a 21/32 bit anyone know which one i am suppose to use along with what tap.
  6. 98bluevert

    What size hole???

    I am putting on a PI intake with alluminum crossover on a 98 GT and need to know what size hole to drill for the second sensor
  7. 98bluevert

    Easiest, most effective way to find out where my coolant leak is?

    easiest way if the crossover is cracked is to start the engine then from under the hood pull on the throttle cable and rev it up to about 3500 rpms. should be very noticable then. right behind the alternantor usually.
  8. 98bluevert

    Rear end help.

    cool have to try it thought maybe i would have to get a special ford tool or something
  9. 98bluevert

    Rear end help.

    Whats the easiest way to get the S-clip out of a 8.8 rear.
  10. 98bluevert

    Can someone tell me if I did this right?

    Buy a haynes, Chilton or Ford repair manual all very helpful just have to know where to read between the lines. I have a haynes and it told me to remove the oil pan in order to remove the timing chain cover. you don't have to do that. Just have to know when to use common since with...
  11. 98bluevert

    Can someone tell me if I did this right?

    i have enough mechanical experiance to get me by(i work in a body shop). There not hard to do but since its my first time with SOHC cams i wanted to make sure i did it right. i tried the Ford tool so i wouldn't have to remove the front cover but my friend slipped and the chain dropped...
  12. 98bluevert

    96 GT Starting/Running issues

    don't mark my words as anything correct but don't the mil's just send back a converted code to the computer to say the cats are still there. if the o2 sensor wasn't needed wouldn't companies just weld the hole shut and we would have different mil's that don't need to be connected to o2 sensors.
  13. 98bluevert

    what is the size of the 12 point pinion flange bolts?

    :lol: :lol: :lol: i love that
  14. 98bluevert

    Can someone tell me if I did this right?

    OK first time swapping cams and wanted to know if i timed them right. Where should the timing chain marks on the crank pulley be if it is at tdc?? Left camgear Right cam gear
  15. 98bluevert

    Need a little HELP with Timing

    link didn't work just stared out the name of the website
  16. 98bluevert

    Need a little HELP with Timing

    thanks thats what i needed, a link or info is just right, i figured i have ptv contact, just needed more info on timing the cams with the crank, but found out that there are two links of different color that i am suppose to match up on the keyway and the cam gear
  17. 98bluevert

    Need a little HELP with Timing

    Stock 1998 shortblock non powered pos, stock heads. Just changing the cams out with PI cams and updated PI intake.
  18. 98bluevert

    Need a little HELP with Timing

    ***BUMP***
  19. 98bluevert

    HELP intake mani leaks

    Did you get a PI or non PI intake??? Which gaskets did you get??? make sure they match the intake if you got a PI intake and use some RTV sealent around the coolant passage openings. make sure all the old gasket is off the head before the new gasket is put down. Some aftermarket...
  20. 98bluevert

    Need a little HELP with Timing

    ok so i don't have to go get a degree wheel and dial indicator and all that stuff, just a harmonic balancer puller and replacer then line the different links up. Are the links painted or are the a different metal like brass or something?
Top Bottom
Back
Forums
Menu