Search results

  1. Kumm3

    Foxbody Suspension

    This http://www.maximummotorsports.com/store/index.php?main_page=product_info&cPath=1_66&products_id=953
  2. Kumm3

    Adjustable Fuel Pressure Regulator

    Another vote for the Kirban
  3. Kumm3

    Exhaust Clip Mega Thread

    331 Dart Stroker, AFR 185s, EFI Spyder Intake, XE282HR Cam (.565/.574), Bassani Equal Length Headers, Bassani Catted X-pipe, Bassani Catback w/ Flowmaster Tailpipes. View: https://www.youtube.com/watch?v=O_-mr3Q-2JQ
  4. Kumm3

    Those With A Gt

    Damn, I read that too fast last night, I thought you were looking for the front fenders. Sorry, the rear spats on the quarter panels are the only part that has never been off the car. So this was a bunch of useless information for you.
  5. Kumm3

    Those With A Gt

    Nevermind, did it now 1 - 5/8" from the rear edge (both holes) Measured from the bottom of the body line/step. Upper is 2 - 1/2", lower is 5 - 3/4"
  6. Kumm3

    Those With A Gt

    I can do that tomorrow if you would like. I have two spare GT fenders in my shed.
  7. Kumm3

    Build Thread Want To Blow 5 Years And $50k On A Foxbody? Step By Step Instructions Inside!

    Hey, its been 4 days! Where is the update??
  8. Kumm3

    Post pics of how your foxbody currently sits

    Who me? Nah, whole car is getting dipped red with black accents.
  9. Kumm3

    Post pics of how your foxbody currently sits

  10. Kumm3

    Wheels-Tires Looking For Some Cobras

    The 99-01 Cobra wheels are different. Just do the rack limiters, thats all you need to fix the problem.
  11. Kumm3

    Build Thread Want To Blow 5 Years And $50k On A Foxbody? Step By Step Instructions Inside!

    I done something like that, no fenders or hood, tearing around the neighborhood.
  12. Kumm3

    SOLD Steeda Adjustable Upper Rear Control Arms & Spherical Axle Bushings - 79-04

    P/N 555-4102 & 555-4103 Bought these about 7-8 years ago, been on the car for the past 6, less than 1500 miles on them. Very light surface rust on them in various spots. Asking $200 for the whole setup, Retails for $320+ Nothing wrong with them, great setup for drag racing, not so much with a...
  13. Kumm3

    SOLD Steeda Adjustable Upper Rear Control Arms & Spherical Axle Bushings - 79-04

    P/N 555-4102 & 555-4103 Bought these about 7-8 years ago, been on the car for the past 6, less than 1500 miles on them. Very light surface rust on them in various spots. Asking $200 for the whole setup, Retails for $320+ Nothing wrong with them, great setup for drag racing, not so much with a...
  14. Kumm3

    Build Thread Want To Blow 5 Years And $50k On A Foxbody? Step By Step Instructions Inside!

    Been there before, used to listen to videos of it on the dyno just to remind (torture) me.
  15. Kumm3

    Build Thread Want To Blow 5 Years And $50k On A Foxbody? Step By Step Instructions Inside!

    This whole thread is just automotive p0rn. Keep up the good work.
  16. Kumm3

    Video: Please Help Diagnose My Vacuum Gauge Reading

    I have a similar issue, how does this apply to a non-stock motor? 331 Stroker, EFI intake, AFR185s, .565"/.574" lift - 112 Lobe cam. Currently pulling 8-10" vac at idle
  17. Kumm3

    Engine 302 Boss Block 2 Piece Rear Main Seal--sealing Problem

    I had the same problem with my 70 Boss block. Never got it figured out though, switched to a Dart block instead.
  18. Kumm3

    Electrical Thanks Jrichker - Door Lock Actuator

    I thought about using the steel, but didnt know if the weight would impede the operation of the actuator. Plus, with the rust possibility, I didnt want to wait for paint to dry. But they are working perfectly now. Decided to replace them in pairs even though the drivers side was still...
  19. Kumm3

    Electrical Thanks Jrichker - Door Lock Actuator

    Finally got around to installing the door lock actuators in my 89. Had the actuators for about 3 years and decided that I didnt want it to make it to 4 years. Anyways, everything went off with no major issues, other than my inability to locate the 1/2" square aluminum tubing. I ended up using...
  20. Kumm3

    SOLD 1987-89 Motorsport 160mph Speedo Head

    Used Motorsport 160MPH Speedo head, fits any mustang from 1987-89, may fit 90-93 with modification, buyer responsible for research. Get your hands on a very hard to find Ford aftermarket part. Odometer shows 18604, perfect working condition, pulled from my own running mustang. Note: Needle...
Top Bottom
Back
Forums
Menu