Search results

  1. T

    Headlight switch bulbs burned out

    If it is ony the switchs on both side of the dashboard. Can you switch them around to see if the good one work on the other side ? Assuming the M/F plugs are the same both side. I don't think you could change the lightbulbs on those switch. They might be LED or very low power bulbs. J/Y...
  2. T

    AOD&what gears?

    A good shop will most likely give you a head up when they are doing rearend gear if the bearing and posi might need to be replace/rebuild. They should asked for a brief history of your car,factor in the mileage etc and save some money for the owner,and good will for the shop in the long run.
  3. T

    need help with exhaust install

    What I ending up doing is hand fitted up everything,then take the car of the jackstands and craw under the car,with the load back on the wheels and suspension I could get a real time look at where the pipes and hangers ending up. It help when you are small.
  4. T

    AOD&what gears?

    I have 3.73,2400 stall and a Lentech valve body. It is a different car from stock. Conv is heavy,so no less then 3.73. For the extra kick,throw on a supercharger. lol
  5. T

    Are fox heaters really this bad?

    Hope you don't have a 160 thermostat in there.
  6. T

    How cold is too cold?

    Car engine are tough. Lot of cars nowday come stock from the factory with Alumn heads etc. 20'F is really not that cold. Just drive slowly until the oil warm up ( Collant heat up faster then motor oil ). I have Alumn heads on all the Mustang I ever owned since 93 and they held up fine. I do...
  7. T

    ssssssss......aaaaahhhhhhhhh......

    I was told those 4 cylinder Mustang do the 1/4 mile in around 65mph,if that is true,then they are a death trap while trying to merge into freeway traffic.
  8. T

    Your thoughts on Duralast by AutoZone?

    I don't mind buying battery from auto part chain. But with limit on time,tools and working space. I rather let other do the works for me. Trying to find a speed shop in the area now that will put in the parts I bring in.
  9. T

    Dead Zone

    I heard something about that a little while back. That is too bad,I jump back and forth between the Mustang sites just to catch up on good buy and tech info. Nothing happen down here in Florida at all. :(
  10. T

    street radials

    Hit a wet spot from someone lawn watering on slicks and ET street and you kiss your a$% goodbye. lol
  11. T

    Dead Zone

    What happen to the NW forum ? It is kind of a dead zone lately. There used to be new posts everyday. Still it is better then the SE forum. lol Kin
  12. T

    estimate my horsepower/torque

    Cobra cam Crane 2031 ?
  13. T

    Help a Rookie in Need

    Choices and more choices.. I think everyone here have their outlook on what parts and combo works or more cost effective. And a 20 year old will see it in a different light then a 45 years old. Best is to get a test drive in as many different Mustang as possible. Go to the local track and check...
  14. T

    Help a Rookie in Need

    Whenever you put a power adder such as your S-trim on the Mustang,you will have so much less room for errors when you are under boost. I think you might be pushing around 350-370rwhp with the stock pulley as it is right now and with a Intake and Heads upgrade another 50-70 hps could be had. That...
  15. T

    Help a Rookie in Need

    3.55 gear ( The hardcore guys alway push for the 4.10,but even a STREET NON-DAILY DRIVER will goes on the freeway more then once in their lifetime,it is just too much for me to see 2800-3000 rpm at 65mph freeway speed. High Stall converter ( This with the gear will wake up any AOD car, I run...
  16. T

    1987 Convertible Classic?

    87-93 5.0 are what jump started the Mustang scene after all those years of 140hp V8. I remembered driving my friend Mustang " Cobra ",it had some kind of Orange racing strips down the side. :) I don't think most Mustang owner around the country will put a 60's Mustang on the same page as the...
  17. T

    shift light help

    I mounted my shiftlight on the dash by the flasher switch,it is visible but not like the 5" tach. The larger Autometer comes standard with a yellow lens cover that cut down on the output of the light ( I only takes it off when I am at the track and really need to see the light during daylight...
  18. T

    Head gasket question

    Like 90lxcoupe posted,just get it running well and keep the boast down. There is lot of 5.0 Mustang pushing over 400 hp at the wheels and that is about 500 hp at the crank. That is about the limit of the stock block before things starting to go byebye. Good aftermarket head gaskets is just one...
  19. T

    Supercharger rebuild

    I bought a Paxton GSS couples of years back but have not get around to set it up yet. It was missing a few mounting bolts here and there. Here is a number you could call for more inform. I was told the guy now owned the GSS serial of Supercharger. Craig Paradise Wheels 760 740 0954...
  20. T

    GT40 intake vacuum lines connection

    The smog pump are connected to the carbon canister. So if you are deleteing the smog pump,then just remove and label everything before you put them away ( Hoses,bracket and clamp ). Plug every unuse port so you won't get vacuum leaks.
Top Bottom
Back
Forums
Menu