Search results

  1. BadMoFo

    drag shifting?

    they were probably telling you to do your burnout in 2nd. but defiantly launch in 1st. try different rpms to see what works best with your car and tire combo.
  2. BadMoFo

    Nitto 315 on 03 Cobra w/stock wheels

    I ran 315 nitto dr's all last year and again this year on my stock rims, have had no problems what so ever and even get a good hook at the track.
  3. BadMoFo

    complete clutch package?

    oh and I plan on going to a 2# lower, ported blower and nitrous down theline, this is my daily driver but I race when I can at the track.
  4. BadMoFo

    complete clutch package?

    ok did a search and couldnt find a complete package thread. what I am wondering since I know it will have to happen eventually what is the best clutch and supporting mods to get when you do your clutch. and I am talking clutch, flywheel, input shaft, adjustable quadrant, ect, teh whole package...
  5. BadMoFo

    rear end info on 04 v6

    well that blows that idea out of the water.
  6. BadMoFo

    rear end info on 04 v6

    just wondering what rear comes in a 04 v6? I know the gt and cobra come with 8.8 but unsure of the v6. reason I ask is I want to swap to a solid axle and know someone with a v6 that I could do it with but dont want to if its not a 8.8. I know the axles and all will have to be upgraded to.
  7. BadMoFo

    anyone done the MRT hood struts?

    ok this is driving me crazy. I checked the bolt and the threads looked fine. I put a long screw driver down threw the hole and it went all the way in. but when I go to put the bolt in its like its to big. it starts to grab and then pops right out. the end of the bolt is turning silver from...
  8. BadMoFo

    does your slotted/cross drilled/dimpled rotors soud like this?

    oh and when I apply the brakes the sound gets louder. also did anyones squeek and for how long. since I dont have a garage or anywhere to put them on at I had to have them done. well the place that did them, midas, said they will squeek for at least 1,000 miles.
  9. BadMoFo

    anyone done the MRT hood struts?

    took a scribe to check that 1st to make sure it wsa lined up when it would go. looking at the bolt you can see where its trying to grab but just isnt.
  10. BadMoFo

    anyone done the MRT hood struts?

    ok so I ordered the MRT hood struts and went to install today, the very 1st thing they have you do is remove a fender bolt to put a bracket on, well I cant get the stupid bolt to go back in, the hole looks lined up but the bolt just wont grab now, I am having the worst luck today. am I missing...
  11. BadMoFo

    does your slotted/cross drilled/dimpled rotors soud like this?

    was going to use it but you get more response over here the ceramic ones
  12. BadMoFo

    does your slotted/cross drilled/dimpled rotors soud like this?

    ok figured it was normal cause of the slotting cutting threw the air but just wanted to make sure
  13. BadMoFo

    does your slotted/cross drilled/dimpled rotors soud like this?

    well they have been on for 3 weeks now
  14. BadMoFo

    does your slotted/cross drilled/dimpled rotors soud like this?

    well it was time to get new brakes so I decided to go all out, or more out I guess I should say. so when I got new pads, (hawk) I also got powerslot rotors with obviously slotted and dimpled cause I liked the look. well now when I drive it makes the sound of a kids bike with a card clipped on...
  15. BadMoFo

    Modular Powerhouse Dyno Day IV (Video)

    sweet vid like always. would happen to know who makes the hood on that grey saleen in the front of the pack when you all are leaving do you?
  16. BadMoFo

    C/C Plates!!!

    never had cc plates on my 00 gt or my 99 cobra and I had lowered springs for them. but when I do springs for my 03 I think I might get them. in the past I was to cheap to do it and got lucky with tire wear, but that may not always be the case.
  17. BadMoFo

    First time to the track

    what track are you going to? 1/8 or 1/4? cause in the 1/8th you only go the 3rd, and at the 1/4 you go to 4th, or at least I do. and as for launch it depends how brave you are and how much your tires can take. I usually launch around 3k but have friends who launch at 5k, but we run drag...
  18. BadMoFo

    4.10 gears + IRS = ?

    yes like that one, I bought it for my 99 cobra but never installed it, bought it new for I think $78 but then sold the 99 and got a 03 so I didnt need it cause it comes stock on the 03.
  19. BadMoFo

    4.10 gears + IRS = ?

    when I had my 99 cobra I had 4.10's in it and had no problems at all. but I do suggest getting an irs brace and a few other things to firm up that irs so you wont get wheel hop.
  20. BadMoFo

    mustang video site?

    no thats not it but I will check it out.
Top Bottom
Back
Forums
Menu