Search results

  1. orangecapri

    BBK headers do work with gt40p heads!!!!

    Mine were nice. I didnt have to do anything to them. Just made sure they cleared and put them on. My cars coming back from paint shop on Sunday so I can get this thing put in finally.
  2. orangecapri

    BBK headers do work with gt40p heads!!!!

    Thats what I thought! Im glad they worked.
  3. orangecapri

    BBK headers do work with gt40p heads!!!!

    I just recieved my bbk headers from summit. I went ahead and took the chance that they may work and may not work. These are the bbk chrome unequal shorties part #1515. I had stock shorties on there first and they cleared ok and worked for over a year for me but the car got wrecked and smashed a...
  4. orangecapri

    nuetral safety switch ?'s for swap

    Well I went out and looked at the 5speed harness that plugs into the tranny and theres 6 wires in the harness but only 4 on the plug in. 2 of them go to a plug in thats not plugged in that was just sitting under the carpet. There are these color of wires. 1. light blue w/red stripe 2. tan w/pink...
  5. orangecapri

    nuetral safety switch ?'s for swap

    Ok, ive got the part up by the pedals figured out. The plug in should already be there, just unplugged on the auto harness. Now what about the wires down by the tranny. I have the harness that plugs into the side of the t5. What wires do I splice together to get this too work. This is the...
  6. orangecapri

    nuetral safety switch ?'s for swap

    What do I do to get the nuetral safety switch to work or how do I bypass it to get the car to start when switching a car from auto to manual? I have an 86 notch if that matters, the car was autov6 and im switching to 5.0 with t5. I have everything to do it, but need to know what wires to connect...
  7. orangecapri

    Do I need any of these wires for my conversion?

    Well ill look at it today and get it out of there. Ill figure it out.
  8. orangecapri

    Do I need any of these wires for my conversion?

    lol, well, Ive found out that their all for the ecc. So I dont need any of them. Now I just need to find out where the disconnect from under the dash. Do I have to take the blower motor box out? Ive already got the computer disconnected and everything.
  9. orangecapri

    Do I need any of these wires for my conversion?

    Nope, when all I need are a couple of wires to get ths thing going, I think that would be a waste of money to me.
  10. orangecapri

    Do I need any of these wires for my conversion?

    Im converting an 86 notch v6 to 5.0 with a carb. Ive already gotten rid of most of the wiring, the computer and vacuum lines. However, Ive got a few wires left that I dont know if I need or not. Do I need any of the wires coming from the firewall on the passenger side? Ive gotten rid of all the...
  11. orangecapri

    v6 to v8 conversion ?'s 86 notch

    v6 3.8 is the same kmember right. I know the inline 6 is different.
  12. orangecapri

    v6 to v8 conversion ?'s 86 notch

    v6 to v8 conversion ?'s 86 notch -------------------------------------------------------------------------------- I just picked up an 86 notch with a 3.8 auto in it and am looking to put my gt40p motor in it t5 tranny and 8.8 out of my capri as it just got totalled. The car does have the...
  13. orangecapri

    v6 to v8 conversion ?'s 86 notch

    sorry double post. delete this one please
  14. orangecapri

    What valve springs for my combo?

    THe car is running. Have 2,000 miles on it already, but I want to be on the safe side and get some new springs.
  15. orangecapri

    What valve springs for my combo?

    I still have the stock springs on my low mile gt40ps but i dont think their up to the task so Im wondering what will work best for my combo. Heres my combo, just looking for some cheap springs that are half way decent so i dont float the valves. 308 with deeper valve reliefs gt40p heads...
  16. orangecapri

    Changing valve springs with heads still on motor?

    Also am I able to use normal sized 302 springs or do I need something special. Im just running the trick flow stage one cam, so nothing too big.
  17. orangecapri

    Changing valve springs with heads still on motor?

    How hard is it to change valve springs with the heads still on the motor? I need to upgrade the stock explorer springs on my gt40ps before something goes wrong. Any reccomendations out there?
  18. orangecapri

    How much is this intake hurting me? Carb'd car.

    Ill look into the stealth. Is it a dual plane or single
  19. orangecapri

    How much is this intake hurting me? Carb'd car.

    How much is this intake hurting me? Carb'd car. -------------------------------------------------------------------------------- How much is the torker2 intake hurting my combo and what do you guys think would be the best match for this. The combo is pretty much going to stay the same as...
  20. orangecapri

    F or B cam for my explorer motor

    I am running the tf1 cam in my gt40p headed motor and i love it. Before that I had a crane flat tappet with .512/.512 and around 234* duration. I love this trick flow cam alot more. The car pulls alot harder, is easier to drive, and the sound is so much more nastier even thought its smaller. I...
Top Bottom
Back
Forums
Menu