Search results

  1. padge

    what am i leaving on the table?

    More like the catback and midpipe combined will give you 10 hp.
  2. padge

    Very Disapointed - Need More Power

    First install what you have...then throw in some gears :shrug: .
  3. padge

    99 GT buck/hesitation/bump during accel?!?

    I'm having a similar sort of problem. Whenever my clutch is engaged and im in the lower rpm's, i floor the throttle and a get a "Bah-Bah-Bah" sound from the rear end, almost a sort of banging sound. However for me this problem only happens in first gear. I haven't had the fuel filter...
  4. padge

    x-pipe in , mills also...

    Lets see some better pics of the car!
  5. padge

    GT to Mach 1?

    You guys sound like you should all be driving Honda's.
  6. padge

    Shifter vibrations

    Hey everyone. I have a problem with my shifter in my 97GT. Whats wrong is that when I'm driving it in 3rd gear, and accelerate around 2000rpm, my shifter vibrates quite a bit. It moves back and forth about a 1/4 of an inch very rapidly. It moves enough so that you can hear it shaking, and it...
  7. padge

    Would this LCD Screen work ??

    A guy I know bought a 94 mustang with an LCD screen and PS2 installed into the dash. They took out the middle vents, dropped the CD player and air/heater controls down a slot, and had a custom mould made to accomodate a 5" by 4" or so LCD screen. They installed the PS2 where the passenger side...
  8. padge

    Clunking sound...

    My car clunks when i drive at WOT in first gear, sounds like its a U-joint or the differential or something. Never used to do it, :nonono: .
  9. padge

    Got flowmasters, LOST power.

    Hows it sound? I've got Dynomax Ultraflows with an offroad X-pipe, but I'm kinda sick of the sound. They drone a lot around 2000 rpm.. which is weird because its a straight through muffler... How are the flows for droning with the X-pipe?
  10. padge

    Launching Problem w/Exhaust

    My exhaust revs up fine with the clutch in, as well as if its in neutral. But whenever I am driving in 1st gear and accelerate fast my exhaust seems to kind of bark rapidly. I think it started doing that after I was driving on a rough gravel road and it scraped under my car. I went underneath...
  11. padge

    Krazy Kiley's "Situation"

    Well, I took my speakers there, stuck to my word, said i wanted my money back and thats it, it was the salespersons fault. He wouldn't do **** so i asked to speak to the manager. He was a real prick, said that he could exchange the speakers for speakers that would fit. I didn't want new...
  12. padge

    Ultraflows + X-Pipe video

    True, but that wasn't all I based my decision on. The muffler shop in my city had all of these parts in stock. The ones I intended on getting I would have had them ordered in, but, my stock exhaust was plugged from a caved in Catalyic converter, and I needed new exhaust right away. So i...
  13. padge

    Ultraflows + X-Pipe video

    955.0HO, maybe try again and see if that helps. If anyone can host it that would be ok, or post your e-mail and I can send it (1.22MB). Thanks for the compliments, it wasn't exactly the sound I was planning on getting. But for the extra performance an X-pipe with straight through mufflers...
  14. padge

    Ultraflows + X-Pipe video

    Hey guys, I took the time to make this video of my new exhaust for anyone thats interested. Offroad X-Pipe with Dynomax Ultraflow welded's. Stock tailpipes. Lemme know what you think: http://padge.gotdns.com/xpipeultraflows.wmv The server might be slow, so be patient :nice: .
  15. padge

    help me pick out an exhaust

    I just got an o/r x-pipe and Dynomax Ultraflow welded's. You will get that nice rumble, but the scream of the X-pipe. Its like a mix between flows and magnapacks. Perfect compromise for me. I wanted the deep rumble too, much like on one of my friends mustangs with Dynomax w/h-pipe. I think...
  16. padge

    Go Dynomax!!

    I finally got EXHAUST! Offroad X-pipe with Dynomax Ultraflow Weldeds. Kept headers stock, as well as the tailpipes. Sounds absolutely amazing. I was all for the offroad H-pipe with flowmaster's, thats what I was planning to get, but I needed new exhaust badly (cats plugged) so I got what the...
  17. padge

    Rear end noise -- what is it? (video)

    My rear end was squeaking like a mofo all the time. Got it looked at, it was the bushings on the the rear differential arms were worn (actual part? :P). So, i'm getting that fixed this week. Maybe we have the same problem, hope this helps.
  18. padge

    Somesthing is seriously wrong.....

    I recently had a similar problem. I have NO top end power basically and the engine pings under high RPM. I took it to the dealer and they first thought MAF sensor. Tried that, didnt work. What actually was wrong is that I bottomed out on a bad road and dented the **** outta my exhaust piping...
  19. padge

    High RPM rattle

    I drive a 97' Mustang GT, 56,000 kms. When I'm driving down the highway I accelerate fully, pedal floored. After about 4000 rpm, a rattling noise comes from the engine area, and it seems like I get no power or acceleration after 4000 rpm, the needles move really slow (even in 3rd gear). Is my...
  20. padge

    Krazy Kiley's "Situation"

    I have 1997 Mustang GT, and I went to Kiley's in Saskatoon to buy new speakers for my car. (They had a sale on, and I wanted speakers. not having done much research) Soo, I'm looking at 6.5" speakers, thinking this is what my car has in it for the front. So the salesman is trying to sell me...
View older results
Top Bottom
Back
Forums
Menu