Search results

  1. G

    mustang II spindles

    @wicked93gs I just saw your post here on this old thread. I have work in progress that includes installing M II spindles on a '65. So far the spindles are on and the'65 upper ball joint taper fits the M II. Also the lower does too. I'm at the point of finishing a front crossmember to hold the...
  2. G

    So confirming what I need to do to put a '88 CV 302/AOD in my '65 A-code.

    You won't have to change the oil pump, just the pick-up tube and oil pan. I think that the 5.0 timing cover is early enough that there will be a cast place for a front dipstick tube. It will need to be drilled out to exactly3/8". 3/8" metal fuel line is the same diameter as the oil dipstick...
  3. G

    Progress Thread Project Fix This Thing Already!

    I like your convertible project and your thread. I like Mustang stories that go decades back. I'm in the north part of the state just 3 miles south of Tennessee state line. The mirror on the drivers door is an original fancy or "deluxe" mirror that came on pony interior Mustangs for sure. If you...
  4. G

    TunerPro RT

    So there are no TunerPro RT people here?
  5. G

    TunerPro RT

    I have looked back 3 years in this forum and see no mention of TunerPro software. Is anyone here familiar with it that can help me get started tuning with it? At first, as I get familiar with it, I would like to do simple things with it like disabling PATS, turning off rear O2 sensors and making...
  6. G

    1968 GT

    hurry and purchase it. Then get it in the dry ASAP!
  7. G

    Really Negative camber Shelby Drop on 70 mustang

    Even though '67 to '70s didn't have shims on the UCAs you may have to shim them. I didn't see if you said if you have an export brace installed. Every early Mustang, '65 to '70, that I have worked on has had to have some sort of pulling done with frame pulling equipment. By eye, I can walk...
  8. G

    1993 Premium sound stereo into 87-92 Mustang : Install thread

    @Mustang5L5 I've put a picture on here of the amp end of my 1993 Mustang Premium Sound wiring harness connectors. Which illustration/s above are these connectors? Do I have to use a '93 Mustang Premium Sound Amp or can I use one from a later Ford like F150 as long as the connectors are the same?
  9. G

    1965 mustang body work, Complete Floor Pan Assembly install questions

    Take some pictures along the way and post them later. Thanks!
  10. G

    1965 mustang body work, Complete Floor Pan Assembly install questions

    Does your replacement floor pan have the flat inner rockers attached to it? It is hard to see that in the pictures.
  11. G

    1965 mustang body work, Complete Floor Pan Assembly install questions

    @runawayabc123 If your replacement floor pan has the inner rocker attached from the factory, you can simply square it up to the outer rocker to get your placement. The floor pan is already attached to the inner rocker, so there is your placement. The top of the inner rocker and the outer rocker...
  12. G

    What is the best Power Steering Conversion kit for a 1964 1/2 mustang

    @chrisful Translate please.. @John Clark Last fall I installed the Borgeson system on a 1970 Mustang. The system performs well and is good and tight. A word of advice, get the kit for your year of Mustang and engine size. All of the parts needed will be in the kit. People with 1967 Mustangs...
  13. G

    What is the best Power Steering Conversion kit for a 1964 1/2 mustang

    Borgeson power box with the Saginaw "P" pump or an EPS. Electric Power Steering. Stay away from original power steering or anyone trying to sell you original assist steering parts.
  14. G

    Put a 2.3 into a 5.0 chassis?

    I think I see how you mounted the fan. I hope you don't mind if I ask a 2.3 question here, seeing as you are on the topic. I need to replace the fuel injectors on/in my 2.3. What do you think of the Bosch rebuilt set? Weren't Bosch OEM? Do me a favor and send me a link to the Ebay resistor...
  15. G

    Put a 2.3 into a 5.0 chassis?

    Let us know when you find the problem.
  16. G

    1968 Mustang - Headlights come on with ignition to "On" position

    Red/green or green/red should be (key on) power to the coil. here is a link on another Mustang forum where this is being discussed for a 1968. 1968 mustang ignition switch wiring
  17. G

    1965 mustang body work, Complete Floor Pan Assembly install questions

    I was up at 4:30 a.m. doing a breathing treatment so I wasn't entirely awake. I'm up again as I wake up, I will see if I can think through this again. It would be nice to have access to another 1965 Mustang to use for general reference. However, keep this in mind. The several different assembly...
  18. G

    1965 mustang body work, Complete Floor Pan Assembly install questions

    I'll have to admit, Your '65 is further apart than I have ever had one apart and put back together. I like to remove and replace one part at a time to be able to keep some point of reference. I'm not trying to sound discouraging but if were me, I would find a solid southern or California...
  19. G

    1965 mustang body work, Complete Floor Pan Assembly install questions

    @runawayabc123 Pictures? It sounds like to me that your floor pan is loose from all of your other parts. I'm having trouble painting a mental picture of it. Once I saw a picture of a really nice assembly jig that was built and in a day a guy roughed in a Fastback with all new parts. His jig was...
  20. G

    GOvert Project: The Beginning

    Picture 0f 2300 mounted in the '65 sub body I'm looking around my place for another coil to replace the one I borrowed from it while I was trying to fix another Ford product that was burning up coil packs. I quit after I "smoked" 7 coils. I saved one because I hear that this 2300 will run with...
View older results
Top Bottom
Back
Forums
Menu