Search results

  1. Z

    Will turn signals work without factory dash?

    I already replaced the TS relay it was zip tied under the fuse box
  2. Z

    Will turn signals work without factory dash?

    OK all good to know, the car doesnt have wipers, but I will have to put a flasher in the fuse panel and see if she works then.. hazard switch is there just wasnt hooked up
  3. Z

    Will turn signals work without factory dash?

    pretty much wondering if this cut wire is for turn signals or not??
  4. Z

    Will turn signals work without factory dash?

    fuse panel doesnt have a flasher in place...
  5. Z

    Will turn signals work without factory dash?

    bought a relay.. still nothing... #5 fuse is good... 1 wire however is cut on the harness going to the steering column / turn signal switch.. its a blue and orange wire that is cut.. on the biggest clip closest to the switch
  6. Z

    Will turn signals work without factory dash?

    As topic states Im in the middle of trying to figure out the turn signal issue, but before i go buy a new relay and really get into it does the factory dash need to be plugged in?? My car is a 87 lx notch orginally a 4 cyl converted to a Ls1 with all aftermarket cobalt gauges... I just got the...
  7. Z

    2V Engine Codes .. Anyone had these??

    First off let me start with, My problem started after I installed my 75 MM TB and Ported Intake plenum.. (Stock plenum ported bought off ebay) About 2 days later i got a check engine light. But my car was scheduled to go into the shop for the supercharger. So they cleared codes and tuned car...
View older results
Top Bottom
Back
Forums
Menu