Search results

  1. bobc83

    let's lower the IAT's

    mind showing me which ebay kit you purchased? I see 3 or 4 that look ok.
  2. bobc83

    Vortech driveability

    The best way to get one of these pipes is to contact Bob Kurgan at [email protected]. Kurgan Motorsports High Performance Mustang Tuning He is a really good tuner, and a all-around nice guy to deal with. That whole team will help you out with any questions you have, silly or...
  3. bobc83

    boost and bypass valve?

    +1 to tropic you can see my thread about the mini race vs the stock bosch bypass valve. I imagine you have a draw-thru setup as it sets, and would really be fine with the bosch. The mini race needs a flange welded on the discharge pipe in order to installed, which is def. not hard, just...
  4. bobc83

    Vortech driveability

    I don't have any pics of the reducer inside the bypass hose, but I just basically found a piece of rubber...like a doughnut and clamped it very tight inside the return hose, which is just a piece of large heater hose. I did this part for extra measure. I modded the PP with help from my...
  5. bobc83

    let's lower the IAT's

    oops did I put this in the wrong section?
  6. bobc83

    let's lower the IAT's

    ok fellas, question for ya I currently use the Snow meth/water stg 2 (375ml nozzle) kit on the car, with about 8psi. It's about to be pulley'd down, so I want to go ahead and get something going here. I did some logging last night, and saw the iat's go from 14x to 110. It was pretty warm...
  7. bobc83

    Vortech pulley ?

    the 3.4 is good for 10? hmm I was about to slap on my 3.2 this weekend...I hope it isn't too much
  8. bobc83

    Vortech pulley ?

    When I had my car tuned with the stock (3.6") pulley it was pretty cold outside and nice and chilled in the shop and I saw 8.5psi...idk, but I usually see 7-8psi, but my best friend has a 99 with the exact same setup and he sees 1 to .5 less psi than me.:shrug:
  9. bobc83

    Vortech pulley ?

    stock pulley is 3.6" and is good for 350-380ish hp, depending on bolt-ons. Personally, if you've never been boosted, I would go with that first. You can always pulley that s-trim down and hold on! edit: how about a meth/water kit until you get an intercooler?
  10. bobc83

    Vortech driveability

    Bypass valve is a mini race and really didn't have a mod done to it directly, I just decreased the amount of air flowing back into the powerpipe with a reducer of sorts inside the return hose. I could have put the bosch back on, but the pipe already had a flange for the mini race on it. The...
  11. bobc83

    Vortech driveability

    I would do that but i've never done my own tuning. For example: my tuner and dyno sheet say my afr was 11.5:1 @ WOT which is excellent, and it stays flat as a board but when I take the car out and do some WOT run, my LM1 says 10.5:1? So who is off here? probably me, but I dont wanna tune on...
  12. bobc83

    Vortech driveability

    UPDATE made some bypass valve and powerpipe mods and the car drives 100x better. Not even the same car. Made some adjustments to the idle's in the tune as well and it's muuuuch better.
  13. bobc83

    Two years? Really?

    You guys are great. Tell emerson I said the vortech is being treated like my only child. :) Keep up the good work, and good prices too I might add.
  14. bobc83

    Walked out of a 7-11 the other day....

    The fella I work with tells his 1.5 year old son that corvette are potties. So one day, after a local basball game, the kid had to pee and kept pointing to a new vette say " I gotta go potty!!!!"
  15. bobc83

    funniest ebay listing i have ever seen

    holy crap this is funny "This BJ is so nice, its guaranteed to give a happy ending to both parties." hahahaha
  16. bobc83

    pics of induction with powerpipe.

    I put mine in the fender and I just reach up from underneath to change.
  17. bobc83

    Axle/American Muscle ?

    I just deleted my ABS pump as well, but my TC is off anyhow. I used a abs pump delete manifold that a guy on corral/mach1-registry makes. Just used the manifold....bought regular 31-spline mosers and pulled a fuse or two. :nice:
  18. bobc83

    switching injector polarity?

    I don't link other forums. Google FTW...try it out
  19. bobc83

    switching injector polarity?

    Yea, I read that you need to lengthen the wires from the harness and switch polarity on them. With a quick google search I found the info on a couple different places.
  20. bobc83

    Been searching cant find answer!!!

    idk if a GT supercar pump fits in your basket like it did in mine, but it was really easy to install and outflows all of the above pumps.
Top Bottom
Back
Forums
Menu