Search results

  1. I

    Noisy Clutch/Throwout????

    They're about $30 and you'll probably need a new pivot ball for the bellhousing. That's what the fork rides on. It's about $10.
  2. I

    Computer

    He's talking about the car.
  3. I

    Noisy Clutch/Throwout????

    You have a bent clutch fork most likely.
  4. I

    need more low end torqe

    I said a blower.
  5. I

    Computer

    Boy did you hear wrong. What are you wanting to do?
  6. I

    TFS High Ports Vrs. Edelbrock RPM heads

    TFS heads will run circles around the Edelbrocks. BUT, the Edelbrocks will work better with your heads and cam.
  7. I

    launching on street tires??

    I agree with what 25th said.
  8. I

    Question about new exhaust vibration

    My friend Michael had a similar, if not the same problem you're having. It was a BBK Xpipe. The hangers were vibrating agianst something on the transmission. Solution: cut them babies off. Didn't hurt anything and the problem went away.
  9. I

    Which rear control arms?

    I'd get the lowers first. As far as uppers go, the Ford Racing uppers are supposed to hook better on the street than others and just as good on the track. It's due to softer bushings.
  10. I

    question about thumper heads, wrong info maybe

    If you get a set I'm sure you'll like them and I've never even tried them. His positive feedback is huge.
  11. I

    How much will a vic. jr. help me?

    Those heads are probably good 'til 5800rpm.
  12. I

    question about thumper heads, wrong info maybe

    Who cares about flow numbers. They flow and that's all that matters. If you make 600whp in a 9000lbs car it's not gonna make a difference because it's gonna be slow. People get too excited with numbers. EDIT: If it sounds as if I'm being a smart***, then don't think I am, I just don't know...
  13. I

    Exhaust

    Get some Pro Dumps for $200 and have an exhaust shop weld you on some new pipes. My .02 cents
  14. I

    Which rear control arms?

    Maximum Motorsports.
  15. I

    How much will a vic. jr. help me?

    It's not worth a shot. It'll kill power all around on that combo.
  16. I

    How much will a vic. jr. help me?

    I'd be using a Performer or an RPM. Don't need a single plane with GT40s.
  17. I

    will bald BFG DRs hook??

    He's full of **** because I've seen what BFG drag radials do from the day they're bought until they're showing belts.
  18. I

    trick flow or edelbrock

    Trick Flow heads perform better out of the box and ported. The valve locations of the heads make these the only heads that can run a 2.02 valve on stock 87-95 5.0pistons.
  19. I

    Boost Timing Retard

    If it's not tuned, then yes, you'll need one.
  20. I

    Eibach drag launch or Stock springs?

    Eibachs should make a difference.
Top Bottom
Back
Forums
Menu