trick flow or edelbrock

spchernandez

New Member
Jun 18, 2005
28
0
0
well guys i need help on decision, right now i have tfs TW with o-ring grooves, and my friend is selling his edelbrock rpm with o-ring grooves too. they are the same valve sizes for intake and exhaust. just which one will put out more power or is it going to be the same. they have about 1,300 miles
 
Stick with the trick flows they are a better head. Better flow #'s and better potential. edlebrocks are good, just not as good. the TW out flow them by 30 cfm at .500 lift out of the box.
 
Stick with the Trick Flows. Edelbrocks are a good head but the TFS do flow better. If they have the same size valves as the TFS, you may have to check the valve to piston clearance. TFS changed the angle on their valves to be able to fit the huge valve on a stock bottom end. I don't know if edelbrock took the same precaution.
Kevin