Search results

  1. Bosko5.0

    Does anyone make the export fender flares anymore?

    Tiger Racing might be able to make some.
  2. Bosko5.0

    front wheel bearing seeping

    Pop the rotor off and see if there is any play in the hub. When I greased my bearings I had some seepage, but when all the excess grease slung out the bad it stopped.
  3. Bosko5.0

    Here is a odd one for you guys! electrical

    Recheck your grounds and + wire
  4. Bosko5.0

    HELP!!!

    alot of mustang gt came stock with strut tower braces. Ive had myne off for a long time with no ill effects. Why do you need one?
  5. Bosko5.0

    front to rear brake line removal help

    A pipe bender is very helpful. Get extra tubing and when you are finished, returned what you have not used. Bend a little at a time and use the old tubing as a template(this way works well).
  6. Bosko5.0

    advantages and disadvantages of coilovers

    Other then price theres no cons. Pros are lighter, adjust ride height, many spring rates. MM c/o with bilstiens:D
  7. Bosko5.0

    What size hole to drill?

    11/32" :nice:
  8. Bosko5.0

    Reclearing wheels ???

    Where would I have to go to get wheels recoated? Approxx how much would it cost to reclear a wheel? Any special clear? I know a couple people have had wheels recleared. Iam trying to get an average price.
  9. Bosko5.0

    Props to Tom (69clark)!!

    A Good guy indeed.:nice:
  10. Bosko5.0

    Wanna install AutoMeter Oil Press Gauge and keep stock one working???? HERE is how

    You also get them from ace hardware.
  11. Bosko5.0

    Splicing into 02's for Lt's (already done)

    I lengthened my O2's wiring between the sensor and the plug with no issues. Iv'e been running them like that for 2 years if not more. :shrug:
  12. Bosko5.0

    How do you all make your wings?

    Fry til floating then coat in kens wings marinade then cover and bake then coat again then enjoy. :nice: Not too spicy just the way i like them. :D
  13. Bosko5.0

    Let's see your mach 1 chin spoilers

  14. Bosko5.0

    How do I fix my persistent leaky intake?

    Cork gasket:nono: Ive done two intakes with no leaks. I rtv'd the end gaskets on both sides used 4 bolts with no head to line everything up like grady suggested. But I torqued the intake the bolts in sequence. make sure to rtv the bolts that go throught the water jacket.
  15. Bosko5.0

    Any one heading to 12 hours of Sebring?

    Any one going? I'll be there with my car and brother.
  16. Bosko5.0

    94 stroker, solving idle problems?

    Any tuning shop should be able to get you a nice idle.
  17. Bosko5.0

    Official Adam95gt Pictorial Progress of Swap / Clean Up

    Ive used brake lines from discount auto with no problems whats so ever. Ive had to replace the entire line in my old volk golf, replaced a damaged line on my brothers truck, And made new lines for my new rearend, in my car that I drive daily. The key is to not over flare it. :nice:
  18. Bosko5.0

    head gasket or intake gasket?

    I believe that is normal, but check your oil.
  19. Bosko5.0

    Random Acting Up

    Maybe its the pip sensor in the distributor.
  20. Bosko5.0

    94 GT help needed

    IF you need the top hinge, let me know I have a brand new one from LRS that I didn't use.
Top Bottom
Back
Forums
Menu